Mitsubishi L200. Manual — part 513
DOOR
BODY
42-112
Code No.4002 P/W (RR) SW pulse 2 disconnection <Double cab>
CAUTION
Whenever the ECU is replaced, ensure that the
input and output signal circuits are normal.
AC711491
HALL IC
HALL IC
POWER
WINDOW
MOTOR
(REAR: RH)
POWER
WINDOW
SUB SWITCH
(REAR: RH)
CPU
Wire colour code
B : Black LG : Light green G : Green L : Blue W : White Y : Yellow SB : Sky blue
BR : Brown O : Orange GR : Grey R : Red P : Pink V : Violet PU : Purple SI : Silver
AB
Power Window (Rear: RH) Circuit
COMMENTS ON TROUBLE SYMPTOM
If the pulse 2 signal from the power window motor
(rear: RH) cannot be received, power window sub
switch (rear: RH) sets the diagnosis code No. 4002.
PROBABLE CAUSES
• Malfunction of the rear power window motor
(rear: RH)
• Malfunction of the rear power window sub switch
(rear: RH)
• Damaged harness wires and connectors
DIAGNOSIS PROCEDURE
STEP 1. Connector check: E-06 rear power
window sub switch (RH) connector and E-05 rear
power window motor (RH) connector
AC509958
Connectors: E-05, E-06
AC
E-06
Harness side
E-05 (B)
E-05 (B)
Harness side
E-06
Q: Is the check result normal?
YES :
Go to Step 2.
NO :
Repair the connector.
DOOR
BODY
42-113
STEP 2. Check the wiring harness between E-06
rear power window sub switch (RH) connector
terminal Nos.2, 3 and E-05 rear power window
motor (RH) connector terminal Nos.4, 5.
AC509958
Connectors: E-05, E-06
AC
E-06
Harness side
E-05 (B)
E-05 (B)
Harness side
E-06
• Check the input and output lines for open or short
circuit.
Q: Is the check result normal?
YES :
Go to Step 3.
NO :
Repair the wiring harness.
STEP 3. Check whether the diagnosis code is
reset.
(1) Replace the rear power window motor (RH).
(2) Check that diagnosis code is not reset.
Q: Is diagnosis code set?
YES :
Replace the rear power window sub switch
(RH).
NO :
The procedure is complete.
Code No.4003: P/W (RR) Above window position
CAUTION
Whenever the ECU is replaced, ensure that the
input and output signal circuits are normal.
COMMENTS ON TROUBLE SYMPTOM
If the rear-right door window glass exceeds the fully
closed position, power window main switch sets the
diagnosis code No. 4003. And, if the rear door win-
dow glass (rear: RH) is removed or installed with the
power is supplied to the power window sub switch
(rear: RH) sets this diagnosis code.
PROBABLE CAUSES
• Malfunction of the rear power window motor
<right side>
• Malfunction of the rear power window sub switch
(rear: RH)
DIAGNOSIS PROCEDURE
STEP 1. Confirm the rear power window <right
side> learning function.
(1) Check that the rear power window sub switch
(RH) has learned the fully closed position of the
window (Refer to
).
(2) On completion, check that diagnosis code
No.4003 is not reset.
Q: Is the check result normal?
YES :
The procedure is complete.
NO :
Go to Step 2.
STEP 2. Check whether the diagnosis code is
reset.
(1) Replace the rear power window motor <right
side>.
(2) Check that diagnosis code is not reset.
Q: Is diagnosis code set?
YES :
Replace the rear power window sub switch
(RH).
NO :
The procedure is complete.
DOOR
BODY
42-114
Code No.4004: P/W (RR) Sensor fail (earth) <Double cab>
CAUTION
Whenever the ECU is replaced, ensure that the
input and output signal circuits are normal.
AC711491
HALL IC
HALL IC
POWER
WINDOW
MOTOR
(REAR: RH)
POWER
WINDOW
SUB SWITCH
(REAR: RH)
CPU
Wire colour code
B : Black LG : Light green G : Green L : Blue W : White Y : Yellow SB : Sky blue
BR : Brown O : Orange GR : Grey R : Red P : Pink V : Violet PU : Purple SI : Silver
AB
Power Window (Rear: RH) Circuit
COMMENTS ON TROUBLE SYMPTOM
If the earth fault of the power window motor (rear:
RH) sensor power supply is detected, power window
sub switch (rear: RH) sets the diagnosis code No.
4004.
PROBABLE CAUSES
• Malfunction of the rear power window motor
(rear: RH)
• Malfunction of the rear power window sub switch
(rear: RH)
• Damaged harness wires and connectors
DIAGNOSIS PROCEDURE
STEP 1. Connector check: E-06 rear power
window sub switch (RH) connector and E-05 rear
power window motor (RH) connector
AC509958
Connectors: E-05, E-06
AC
E-06
Harness side
E-05 (B)
E-05 (B)
Harness side
E-06
Q: Is the check result normal?
YES :
Go to Step 2.
NO :
Repair the connector.
DOOR
BODY
42-115
STEP 2. Check the wiring harness between E-06
rear power window sub switch (RH) connector
terminal No. 3 and E-05 rear power window motor
(RH) connector terminal No. 5.
AC509958
Connectors: E-05, E-06
AC
E-06
Harness side
E-05 (B)
E-05 (B)
Harness side
E-06
• Check the power supply line for open or short cir-
cuit.
Q: Is the check result normal?
YES :
Go to Step 3.
NO :
Repair the wiring harness.
STEP 3. Check whether the diagnosis code is
reset.
(1) Replace the rear power window motor (RH).
(2) Check that diagnosis code is not reset.
Q: Is diagnosis code set?
YES :
Replace the rear power window sub switch
(RH).
NO :
The procedure is complete.
Code No.4005: P/W (RR) 3 Times jam-protection <Double cab>
CAUTION
Whenever the ECU is replaced, ensure that the
input and output signal circuits are normal.
COMMENTS ON TROUBLE SYMPTOM
If the anti-trap function is activated consecutively
three times or more, power window sub switch (rear:
RH) sets the diagnosis code No. 4005.
PROBABLE CAUSES
• Malfunction of the rear power window motor
(rear: RH)
• Malfunction of the rear power window sub switch
(rear: RH)
DIAGNOSIS PROCEDURE
STEP 1. Confirm the rear power window <right
side> learning function.
(1) Check that the rear power window sub switch
(RH) has learned the fully closed position of the
window (Refer to
).
(2) On completion, check that diagnosis code
No.4005 is not reset.
Q: Is the check result normal?
YES :
The procedure is complete.
NO :
Go to Step 2.
STEP 2. Check whether the diagnosis code is
reset.
(1) Replace the rear power window motor (RH).
(2) Check that diagnosis code is not reset.
Q: Is diagnosis code set?
YES :
Replace the rear power window sub switch
(RH).
NO :
The procedure is complete.
Code No.4008: P/W (RR) Parameter read fail
Code No.4009: P/W (RR) Position read fail
CAUTION
Whenever the ECU is replaced, ensure that the
input and output signal circuits are normal.
COMMENTS ON TROUBLE SYMPTOM
• If the power window sub switch (rear: RH) infor-
mation cannot be read, power window sub switch
(rear: RH) sets the diagnosis code No. 4008.
• If the rear-right door window glass position can-
not be read, power window sub switch (rear: RH)
sets the diagnosis code No. 4009.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст