Mitsubishi L200. Manual — part 511
DOOR
BODY
42-104
Code No.2008: P/W (AS) Parameter read fail
Code No.2009: P/W (AS) Position read fail
CAUTION
Whenever the ECU is replaced, ensure that the
input and output signal circuits are normal.
COMMENTS ON TROUBLE SYMPTOM
• If the power window sub switch (front: RH) infor-
mation cannot be read, power window sub switch
(front: RH) sets the diagnosis code No. 2008.
• If the front passenger's door window glass posi-
tion cannot be read, power window sub switch
(front: RH) sets the diagnosis code No. 2009.
PROBABLE CAUSES
• Malfunction of the front power window sub switch
DIAGNOSIS PROCEDURE
Check whether the diagnosis code is reset.
Check that the diagnosis code is not reset.
Q: Is diagnosis code set?
YES :
Replace the front power window sub switch.
NO :
The procedure is complete.
Code No.3001: P/W (RL) SW pulse1 disconnection <Double cab>
CAUTION
Whenever the ECU is replaced, ensure that the
input and output signal circuits are normal.
AC711490
HALL IC
HALL IC
POWER
WINDOW
SUB SWITCH
(REAR: LH)
POWER
WINDOW
MOTOR
(REAR: LH)
CPU
Wire colour code
B : Black LG : Light green G : Green L : Blue W : White Y : Yellow SB : Sky blue
BR : Brown O : Orange GR : Grey R : Red P : Pink V : Violet PU : Purple SI : Silver
AB
Power Window (Rear: LH) Circuit
COMMENTS ON TROUBLE SYMPTOM
If the pulse 1 signal from the power window motor
(rear: LH) cannot be received, power window sub
switch (rear: LH) sets the diagnosis code No. 3001.
PROBABLE CAUSES
• Malfunction of the rear power window motor (LH)
• Malfunction of the rear power window sub switch
(LH)
• Damaged harness wires and connectors
DOOR
BODY
42-105
DIAGNOSIS PROCEDURE
STEP 1. Connector check: E-13 rear power
window sub switch (LH) connector and E-14 rear
power window motor (LH) connector
AC509956
Connectors: E-13, E-14
AC
E-13
Harness side
E-14 (B)
E-14 (B)
Harness side
E-13
Q: Is the check result normal?
YES :
Go to Step 2.
NO :
Repair the connector.
STEP 2. Check the wiring harness between E-13
rear power window sub switch (LH) connector
terminal Nos.8, 3 and E-14 rear power window
motor (LH) connector terminal Nos.2, 5.
AC509956
Connectors: E-13, E-14
AC
E-13
Harness side
E-14 (B)
E-14 (B)
Harness side
E-13
• Check the input and output lines for open or short
circuit.
Q: Is the check result normal?
YES :
Go to Step 3.
NO :
Repair the wiring harness.
STEP 3. Check whether the diagnosis code is
reset.
(1) Replace the rear power window motor (LH).
(2) Check that diagnosis code is not reset.
Q: Is diagnosis code set?
YES :
Replace the rear power window sub switch
(LH).
NO :
The procedure is complete.
DOOR
BODY
42-106
Code No.3002 P/W (RL) SW pulse 2 disconnection <Double cab>
CAUTION
Whenever the ECU is replaced, ensure that the
input and output signal circuits are normal.
AC711490
HALL IC
HALL IC
POWER
WINDOW
SUB SWITCH
(REAR: LH)
POWER
WINDOW
MOTOR
(REAR: LH)
CPU
Wire colour code
B : Black LG : Light green G : Green L : Blue W : White Y : Yellow SB : Sky blue
BR : Brown O : Orange GR : Grey R : Red P : Pink V : Violet PU : Purple SI : Silver
AB
Power Window (Rear: LH) Circuit
COMMENTS ON TROUBLE SYMPTOM
If the pulse 2 signal from the power window motor
(rear: LH) cannot be received, power window sub
switch (rear: LH) sets the diagnosis code No. 3002.
PROBABLE CAUSES
• Malfunction of the rear power window motor (LH)
• Malfunction of the rear power window sub switch
(LH)
• Damaged harness wires and connectors
DIAGNOSIS PROCEDURE
STEP 1. Connector check: E-13 rear power
window sub switch (LH) connector and E-14 rear
power window motor (LH) connector
AC509956
Connectors: E-13, E-14
AC
E-13
Harness side
E-14 (B)
E-14 (B)
Harness side
E-13
Q: Is the check result normal?
YES :
Go to Step 2.
NO :
Repair the connector.
DOOR
BODY
42-107
STEP 2. Check the wiring harness between E-13
rear power window sub switch (LH) connector
terminal Nos.2, 3 and E-14 rear power window
motor (LH) connector terminal Nos.4, 5.
AC509956
Connectors: E-13, E-14
AC
E-13
Harness side
E-14 (B)
E-14 (B)
Harness side
E-13
• Check the input and output lines for open or short
circuit.
Q: Is the check result normal?
YES :
Go to Step 3.
NO :
Repair the wiring harness.
STEP 3. Check whether the diagnosis code is
reset.
(1) Replace the rear power window motor (LH).
(2) Check that diagnosis code is not reset.
Q: Is diagnosis code set?
YES :
Replace the rear power window sub switch
(LH).
NO :
The procedure is complete.
Code No.3003: P/W (RL) Above window position <Double cab>
CAUTION
Whenever the ECU is replaced, ensure that the
input and output signal circuits are normal.
COMMENTS ON TROUBLE SYMPTOM
If the rear-left door window glass exceeds the fully
closed position, power window sub switch (rear: LH)
sets the diagnosis code No. 3003. And, if the rear
door window glass (LH) is removed or installed with
the power is supplied to the power window sub
switch (rear: LH) sets this diagnosis code.
PROBABLE CAUSES
• Malfunction of the rear power window motor (LH)
• Malfunction of the rear power window sub switch
(LH)
DIAGNOSIS PROCEDURE
STEP 1. Confirm the rear power window <left
side> learning function.
(1) Check that the rear power window sub switch
(LH) has learned the fully closed position of the
window (Refer to
).
(2) On completion, check that diagnosis code
No.3003 is not reset.
Q: Is the check result normal?
YES :
The procedure is complete.
NO :
Go to Step 2.
STEP 2. Check whether the diagnosis code is
reset.
(1) Replace the rear power window motor (LH).
(2) Check that diagnosis code is not reset.
Q: Is diagnosis code set?
YES :
Replace the rear power window sub switch
(LH).
NO :
The procedure is complete.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст