Mitsubishi L200. Manual — part 516
DOOR
BODY
42-124
(2) Turn the ignition switch to the ON position.
AC310507IY
Connector E-03
(harness side)
10
1
6
14
5
12
13
4
11
7
2
3
8
9
(3) Check the voltage between the E-03 power
window relay connector terminal No.6 and body
earth.
OK: System voltage
Q: Is the check result normal?
YES :
Go to Step 15.
NO :
Go to Step 14.
DOOR
BODY
42-125
STEP 14. Check the wiring harness between A-
24X power window relay connector terminal No.3
and E-03 power window main switch connector
terminal No. 6.
AC600252
AG
Connector: A-24X
Relay box side
AC509952
Connector: E-03 <LHD>
AI
Harness side
AC509954
Connector: E-03 <RHD>
AI
Harness side
NOTE:
AC805686AS
Connectors: C-32, C-33, C-134 <LHD>
C-134
C-133
C-33
C-33
C-32
(GR)
C-32 (GR)
AC509930BY
Connectors: C-32, C-33, C-133 <RHD>
C-32 (GR)
C-133
C-33
C-134
C-33
C-32 (GR)
Prior to the wiring harness inspection, check interme-
diate connector C-33, C-134 and joint connector C-
32, and repair if necessary.
• Check the power supply line for open circuit.
Q: Is the check result normal?
YES :
The trouble can be an intermittent
malfunction (Refer to GROUP 00, How to
use Troubleshooting/inspection Service
Points
− How to Cope with Intermittent
Malfunction ).
NO :
Repair the harness wire.
DOOR
BODY
42-126
STEP 15. Resistance measurement at the E-03
power window main switch connector.
AC509952
Connector: E-03 <LHD>
AI
Harness side
AC509954
Connector: E-03 <RHD>
AI
Harness side
(1) Disconnect the connector, and measure at the
wiring harness side.
AC209731
Connector E-03
(harness side)
AC208731BH
10
1
6
14
5
12
13
4
11
7
2
3
8
9
(2) Check the resistance between E-03 power
window main switch connector terminal No.2 and
body earth.
OK: Continuity exists (2
Ω or less)
Q: Is the check result normal?
YES :
Go to Step 17.
NO :
Go to Step 16.
STEP 16. Check the wiring harness between E-03
power window main switch connector terminal
No.2 and body earth.
AC509952
Connector: E-03 <LHD>
AI
Harness side
AC509954
Connector: E-03 <RHD>
AI
Harness side
NOTE:
AC903856AG
Connector: C-134 <LHD>
Harness side
AC903363
AU
Connector: C-134 <RHD>
Prior to the wiring harness inspection, check interme-
diate connector C-134, and repair if necessary.
• Check the earth wires for open circuit.
Q: Is the check result normal?
DOOR
BODY
42-127
YES :
The trouble can be an intermittent
malfunction (Refer to GROUP 00, How to
use Troubleshooting/inspection Service
Points
− How to Cope with Intermittent
Malfunction ).
NO :
Repair the wiring harness.
STEP 17. Retest the system.
(1) Replace the power window main switch.
(2) Check that the all the power windows works.
Q: Is the check result normal?
YES :
The procedure is complete.
NO :
Replace the ETACS-ECU and register the
ID codes (Refer to GROUP 54A, How to
Register Encrypted Code ).
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст