Mitsubishi L200. Manual — part 517
DOOR
BODY
42-128
Inspection Procedure B-2: Driver's Power Window does not Work by means of the Power Window
Main Switch. <LH drive vehicles>
CAUTION
Whenever the ECU is replaced, ensure that the
input and output signal circuits are normal.
AC900871
Power Window (LH) Circuit
ETACS-ECU
RELAY
BOX
POWER WINDOW
RELAY
FUSIBLE
LINK
23
CPU
Wire colour code
B : Black LG : Light green G : Green L : Blue W : White Y : Yellow SB : Sky blue
BR : Brown O : Orange GR : Grey R : Red P : Pink V : Violet PU : Purple
HALL IC
HALL IC
POWER
WINDOW
MAIN SWITCH
POWER WINDOW
MOTOR
(FRONT: LH)
FRONT (LH)
AB
DOOR
BODY
42-129
COMMENTS ON TROUBLE SYMPTOM
If the driver's door power window does not work by
means of the power window main switch, the power
window main switch or the driver's door power win-
dow motor may be defective.
PROBABLE CAUSES
• Malfunction of the power window main switch
• Malfunction of the power window motor (front:LH)
• Damaged harness wires and connectors
DIAGNOSIS PROCEDURE
STEP 1. M.U.T.-III diagnosis code.
When the ignition switch is turned to the "ON" posi-
tion, check that the ETACS-ECU does not set the
diagnosis code.
Q: Is the diagnosis code set?
YES :
Refer to
.
NO :
Go to Step 2.
STEP 2. Check the power window main switch.
Check that all of the front passenger's power window
and the rear power windows <Double cab> can oper-
ate by means of the power window main switch.
Q: Is the check result normal?
YES :
Go to Step 3.
NO :
Refer to
STEP 3. Connector check: Connector check: E-
03 power window main switch connector and E-
18 power window motor (front: LH) connector
AC509952
Connectors: E-03, E-18 <LHD>
AG
Harness side
E-03
E-03
Harness side
E-18 (B)
E-18 (B)
Q: Is the check result normal?
YES :
Go to Step 4.
NO :
Repair the connector.
STEP 4. Check the wiring harness between E-03
power window main switch connector terminal
Nos. 1, 7 and E-18 power window motor (front:
LH) connector terminal Nos. 3, 1.
AC509952
Connectors: E-03, E-18 <LHD>
AG
Harness side
E-03
E-03
Harness side
E-18 (B)
E-18 (B)
• Check the input and output lines for open and
short circuit.
Q: Is the check result normal?
YES :
Go to Step 5.
NO :
Repair the wiring harness.
STEP 5. Retest the system.
(1) Replace the power window main switch.
(2) Check that the driver's power window works by
means of the power window main switch.
Q: Is the check result normal?
YES :
The procedure is complete.
NO :
Replace the power window motor (front:
LH).
DOOR
BODY
42-130
Inspection Procedure B-3: Driver's Power Window does not Work by means of the Power Window
Main Switch. <RH drive vehicles>
CAUTION
Whenever the ECU is replaced, ensure that the
input and output signal circuits are normal.
AC806163
Power Window (RH) Circuit
ETACS-ECU
RELAY
BOX
POWER WINDOW
RELAY
FUSIBLE
LINK
23
CPU
Wire colour code
B : Black LG : Light green G : Green L : Blue W : White Y : Yellow SB : Sky blue
BR : Brown O : Orange GR : Grey R : Red P : Pink V : Violet PU : Purple
HALL IC
HALL IC
POWER
WINDOW
MAIN SWITCH
POWER WINDOW
MOTOR
(FRONT: RH)
FRONT (RH)
AC
7
14
DOOR
BODY
42-131
COMMENTS ON TROUBLE SYMPTOM
If the driver's door power window does not work by
means of the power window main switch, the power
window main switch or the driver's door power win-
dow motor may be defective.
PROBABLE CAUSES
• Malfunction of the power window main switch
• Malfunction of the power window motor (front:
RH)
• Damaged harness wires and connectors
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст