Mitsubishi Lancer (4A9 engine). Manual — part 208
SPEAKER
CHASSIS ELECTRICAL
54A-494
SUBWOOFER <LANCER>
SUBWOOFER <LANCER SPORTBACK>
AC608803
1
AE
5.0 ± 1.0 N·m
5.0 ± 1.0 N·m
Removal Step
1.
Rear speaker box assembly
Pre-removal operation
Removal of quarter trim (LH) (Refer to GROUP 52A
−
Quarter Trim )
Post-installation operation
Installation of quarter trim (LH) (Refer to GROUP 52A
−
Quarter Trim )
AC801904
1
AB
5.0 ± 1.0 N·m
5.0 ± 1.0 N·m
SPEAKER
CHASSIS ELECTRICAL
54A-495
REMOVAL SERVICE POINT
<<A>> REMOVAL OF FRONT DOOR SPEAKER
AND REAR DOOR SPEAKER
Disconnect the connector, and remove by twisting as
shown in the figure.
INSTALLATION SERVICE POINT
>>A<< REAR SPEAKER BOX ASSEMBLY
INSTALLATION
Tighten the bolts in the order of 1, 2, 3, 4 shown in
the figure.
Removal Steps
>>
A
<< 1.
Rear speaker box assembly
AC507244
AC802125
1
2
4
3
AB
ANTENNA
CHASSIS ELECTRICAL
54A-496
ANTENNA
REMOVAL AND INSTALLATION
M1544200200960
<LHD>
Pre-removal operation <Only Antenna base and Antenna
feeder>
• Removal of headlining (Refer to GROUP 52A − Headlin-
ing ).
• Removal of grove box cover (Refer to GROUP 52A −
Grove box ).
• Removal of AS&G-ECU bracket (Refer to GROUP 17 -
AS&G-ECU ).<Vehicles with Auto Stop & Go (AS&G) Sys-
tem>
• Removal of radio and CD player or multivision display
(Refer to <vehicles with radio and CD player> or <vehi-
cles with MMCS> ).
Post-installation operation <Only Antenna base and
Antenna feeder>
• Installation of radio and CD player or multivision display
(Refer to <vehicles with radio and CD player> or <vehi-
cles with MMCS> ).
• Installation of AS&G-ECU bracket (Refer to GROUP 17 -
AS&G-ECU ).<Vehicles with Auto Stop & Go (AS&G) Sys-
tem>
• Installation of grove box cover (Refer to GROUP 52A −
Grove box ).
• Installation of headlining (Refer to GROUP 52A − Headlin-
ing ).
ACA00834
1
2
5.0 ± 1.0 N·m
3
AB
4
Removal Steps
1.
Antenna rod
2.
Antenna base (antenna spring)
3.
Antenna base
4.
Antenna feeder
Removal Steps (Continued)
ANTENNA
CHASSIS ELECTRICAL
54A-497
<RHD>
Pre-removal operation <Only Antenna base and Antenna
feeder>
• Removal of headlining (Refer to GROUP 52A − Headlin-
ing ).
• Removal of radio and CD player or multivision display
(Refer to <vehicles with radio and CD player> or <vehi-
cles with MMCS> ).
• Removal of instrument panel (Refer to GROUP 52A −
Instrument panel assembly ).
Post-installation operation <Only Antenna base and
Antenna feeder>
• Installation of instrument panel (Refer to GROUP 52A −
Instrument panel assembly ).
• Installation of radio and CD player or multivision display
(Refer to <vehicles with radio and CD player> or <vehi-
cles with MMCS> ).
• Installation of headlining (Refer to GROUP 52A − Headlin-
ing ).
ACA00836
1
2
5.0 ± 1.0 N·m
3
AB
4
Removal Steps
1.
Antenna rod
2.
Antenna base (antenna spring)
3.
Antenna base
4.
Antenna feeder
Removal Steps (Continued)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст