Mitsubishi Lancer (4A9 engine). Manual — part 207
AMPLIFIER
CHASSIS ELECTRICAL
54A-490
AMPLIFIER
REMOVAL AND INSTALLATION
M1544004100778
CAUTION
To remove the front seat assembly of vehicle with side air bag, refer to GROUP 52B
− Service Precau-
tions and Side-Air Bag Module(S) .
REMOVAL SERVICE POINT
<<A>> REMOVAL OF AUDIO AMPLIFIER BOX
BRACKET
Turn up and remove the carpet.
SPEAKER
ON-VEHICLE SERVICE
SPEAKER TEST
M1544100500599
RADIO AND CD PLAYER SPEAKER CON-
NECTION CHECK MODE
Enter the speaker connection check mode according
to the following steps:
1. Turn the Ignition switch to the "ACC" or "ON"
position and switch off the radio and CD player.
Pre-removal operation
• Removal of front seat assembly (LH) (Refer to GROUP
52A
− Front Seat Assembly )
Post-installation operation
• Installation of front seat assembly (Refer to GROUP 52A
− Front Seat Assembly )
AC801900AB
3
4
2
1.5 ± 0.5 N·m
1.5 ± 0.5 N·m
5.0 ± 1.0 N·m
5
5.0 ± 1.0 N·m
5.0 ± 1.0 N·m
1
Removal Steps
1.
Connector connection to audio
amplifier
2.
Audio amplifier/ audio amplifier
cover
3.
Audio amplifier cover
4.
Audio amplifier
<<
A
>>
5.
Audio amplifier box bracket
SPEAKER
CHASSIS ELECTRICAL
54A-491
2. Press the following buttons in that order within
sixty seconds from step (1).
(1) [CH1] button
(2) Rewind button
(3) Fast-forward button
(4) [CH6] button
3. Check that the speaker, which is displayed on the
centre panel display, sounds (If the [CH6] button
is pressed, the speaker will be changed).
NOTE: The display of "FL", "FR", "RL",
"RR","RW"blinks.
4. If a button other than the [CH6] button is pressed,
or the ignition switch is turned to "LOCK" (OFF)
position, you will exit from the speaker connection
check mode.
BUZZ NOISE CHECK MODE
Inserting a CD during the speaker connection check
mode shifts the mode to the buzz noise check mode,
and the buzz noise sound of each speaker can be
checked.
As with the speaker connection check mode, press
the [CH6] button to switch the output speaker of the
buzz noise check sound.
Check that the buzz noise sound is output from the
output speaker of buzz noise check sound.
NOTE: "SPKR" is displayed as "BUZZ" during buzz
noise check mode.
SPEAKER TEST <VEHICLES WITH
MMCS>
M1544100500124
Refer to MMCS service mode .
AC711790
AH
[CH1] button
[CH6] button
Fast-forward button
Rewind button
AC701315
<Front door speaker
and tweeter (LH)>
<Front door speaker
and tweeter (RH)>
<Rear door
speaker (LH)>
<Rear door
speaker (RH)>
AC
<Display>
<Subwoofer:
vehicles with
audio amplifier>
SPEAKER
CHASSIS ELECTRICAL
54A-492
REMOVAL AND INSTALLATION
M1544100300443
FRONT DOOR SPEAKER
REAR DOOR SPEAKER
Pre-removal operation
• Removal of front door trim (Refer to GROUP 52A − Door
trim )
Post-installation operation
• Installation of front door trim (Refer to GROUP 52A −
Door trim )
• Learning of the power window fully closed position (Refer
to GROUP 42A
− Door, On-vehicle service .)
AC506846
AC802122
1
AB
Removal Step
<<
A
>>
1.
Front door speaker
Pre-removal operation
• Removal of rear door trim (Refer to GROUP 52A − Door
trim )
Post-installation operation
• Installation of rear door trim (Refer to GROUP 52A − Door
trim )
• Learning of the power window fully closed position (Refer
to GROUP 42A
− Door, On-vehicle service .)
AC506847
AC802123
1
AB
Removal Step
<<
A
>>
1.
Rear door speaker
SPEAKER
CHASSIS ELECTRICAL
54A-493
TWEETER
AC608780
1
1
AB
Section A – A
Clip
A
A
AC608782
3
4
5
AB
2
Removal Steps
1.
Front door sash trim assembly
2.
Tweeter bracket and Tweeter
3.
Tweeter bracket
4.
Tweeter
5.
Front door sash trim
Removal Steps (Continued)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст