Mitsubishi Evolution X. Manual — part 1044
SATELLITE RADIO TUNER
TSB Revision
CHASSIS ELECTRICAL
54A-537
DIAGNOSIS
INTRODUCTION TO SATELLITE RADIO
DIAGNOSIS
M1544004700361
ERROR CODE (SIRIUS SATELLITE RADIO)
The display displays the error codes if an abnormality related to
the satellite radio is detected. (Refer to
.)
STANDARD FLOW OF DIAGNOSTIC
TROUBLESHOOTING
M1544016500041
Refer to GROUP 00, Troubleshooting contents
.
DIAGNOSIS FUNCTION
M1544013200193
HOW TO CONNECT THE SCAN TOOL (M.U.T.-III)
Required Special Tools:
• MB991958: Scan Tool (M.U.T.-III Sub Assembly)
• MB991824: Vehicles Communication Interface (V.C.I.)
• MB991827: M.U.T.-III USB Cable
• MB991910: M.U.T.-III Main Harness A (Vehicles with
CAN communication system)
MB991223
a. MB991219
b. MB991220
c. MB991221
d. MB991222
Harness set
a. Check harness
b. LED harness
c. LED harness
adapter
d. Probe
General service tool
(jumper)
Continuity check and voltage
measurement at harness wire or
connector
a. For checking connector pin
contact pressure
b. For checking power supply
circuit
c. For checking power supply
circuit
d. For connecting a locally
sourced tester
MB992006
Extra fine probe
−
Continuity check and voltage
measurement at harness wire or
connector
Tool
Tool number and
name
Supersession
Application
MB991223
a
d
c
b
DO NOT USE
BA
MB992006
SATELLITE RADIO TUNER
TSB Revision
CHASSIS ELECTRICAL
54A-538
CAUTION
To prevent damage to scan tool MB991958, always turn the
ignition switch to the "LOCK" (OFF) position before con-
necting or disconnecting scan tool MB991958.
1. Ensure that the ignition switch is at the "LOCK" (OFF)
position.
2. Start up the personal computer.
3. Connect special tool MB991827 to special tool MB991824
and the personal computer.
4. Connect special tool MB991910 to special tool MB991824.
5. Connect special tool MB991910 to the data link connector.
6. Turn the power switch of special tool MB991824 to the "ON"
position.
NOTE: When special tool MB991824 is energized, special
tool MB991824 indicator light will be illuminated in a green
color.
7. Start the scan tool system on the personal computer.
NOTE: Disconnecting scan tool MB991958 is the reverse of the
connecting sequence, making sure that the ignition switch is at
the "LOCK" (OFF) position.
HOW TO READ AND ERASE DIAGNOSTIC
TROUBLE CODES
Required Special Tools:
• MB991958: Scan Tool (M.U.T.-III Sub Assembly)
• MB991824: Vehicles Communication Interface (V.C.I.)
• MB991827: M.U.T.-III USB Cable
• MB991910: M.U.T.-III Main Harness A (Vehicles with
CAN communication system)
NOTE: If the battery voltage is low, diagnostic trouble codes will
not be set. Check the battery if scan tool MB991958 does not
display.
1. Connect scan tool MB991958 to the data link connector.
2. Turn the ignition switch to the "ON" position.
3. Select "System select" from the start-up screen.
4. Select "From 2006 MY" of "Model Year." When the "Vehicle
Information" is displayed, check the contents.
5. Select "Meter" from "System List," and press the "OK"
button.
NOTE: When the "Loading Option Setup" list is displayed,
check the applicable item.
6. Select "Diagnostic Trouble Code."
7. If a DTC is set, it is shown.
8. Choose "Erase DTCs" to erase the DTC.
AC608435
Data link connector
MB991827
MB991824
MB991910
AB
SATELLITE RADIO TUNER
TSB Revision
CHASSIS ELECTRICAL
54A-539
HOW TO DIAGNOSE THE CAN BUS LINES
Required Special Tools:
• MB991958: Scan Tool (M.U.T.-III Sub Assembly)
• MB991824: Vehicles Communication Interface (V.C.I.)
• MB991827: M.U.T.-III USB Cable
• MB991910: M.U.T.-III Main Harness A (Vehicles with
CAN communication system)
1. Connect scan tool MB991958 to the data link connector.
2. Turn the ignition switch to the "ON" position.
3. Select "CAN bus diagnosis" from the start-up screen.
4. When the vehicle information is displayed, confirm that it
matches the vehicle being diagnosed.
• If they match, go to Step 8.
• If not, go to Step 5.
5. Select the "view vehicle information" button.
6. Enter the vehicle information and select the "OK" button.
7. When the vehicle information is displayed, confirm again
that it matches the vehicle being diagnosed.
• If they match, go to Step 8.
• If not, go to Step 5.
8. Select the "OK" button.
9. When the optional equipment screen is displayed, choose
the one which the vehicle is fitted with, and then select the
"OK" button.
CHECK OF FREEZE FRAME DATA
The freeze frame data can be checked by using scan
tool MB991958.
.
When detecting fault and storing the diagnostic trou-
ble code, the ECU connected to CAN bus line
obtains the data before the determination of the diag-
nostic trouble code and the data when the diagnostic
trouble code is determined, and then stores the ECU
status of that time. By analyzing each data from scan
tool MB991958, the troubleshooting can be per-
formed more efficiently. The displayed items are as
the table below.
Display item list
Item No.
Item name
Data item
Unit
1
Odometer
Total driving distance after the diagnostic trouble
code is generated
km
2
Ignition cycle
Number of times the ignition switch is turned "ON" or
"LOCK (OFF)" after the past failure transition
Number of
counts is
displayed.
4
Accumulated minute Cumulative time for current malfunction of
diagnostic trouble code
min
SATELLITE RADIO TUNER
TSB Revision
CHASSIS ELECTRICAL
54A-540
DIAGNOSTIC TROUBLE CODE CHART
M1544012900229
DIAGNOSTIC TROUBLE CODE PROCEDURES
DTC B2222: Radio receiver internal fail
CAUTION
If there is any problem in the CAN bus lines, an
incorrect diagnostic trouble code may be set.
Prior to this diagnosis, always diagnose the CAN
bus lines.
CAUTION
Before replacing the satellite radio tuner, be sure
to check that the power supply circuit, ground
circuit, and communication circuit are normal.
.
TROUBLE JUDGMENT
When the ignition switch is ON and the system volt-
age is from 10 V to 16 V (data from ETACS-ECU), if
the satellite radio tuner receives abnormal status by
signal conditioning 10 times consecutively, DTC
B2222 is stored.
.
COMMENTS ON TROUBLE SYMPTOM
The satellite radio tuner or CAN bus line may have a
problem.
.
PROBABLE CAUSES
• The satellite radio tuner may be defective.
• The CAN bus line may be defective
DIAGNOSIS
Required Special Tools:
• MB991958: Scan Tool (M.U.T.-III Sub Assembly)
• MB991824: Vehicles Communication Interface (V.C.I.)
• MB991827: M.U.T.-III USB Cable
• MB991910: M.U.T.-III Main Harness A (Vehicles with
CAN communication system)
Diagnostic trouble
code number
Trouble content
Reference page
B2222
Radio receiver internal fail
U0019
Bus off (CAN-B)
U0141
ETACS CAN timeout
U0151
SRS-ABG CAN timeout
U0154
OCM CAN timeout
U0155
Meter CAN timeout
U0164
A/C CAN timeout
U0168
WCM CAN timeout
U0184
Audio CAN timeout
U0197
Hands free module CAN timeout
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст