Mitsubishi Evolution X. Manual — part 1043
STEERING WHEEL AUDIO REMOTE CONTROL SWITCH
TSB Revision
CHASSIS ELECTRICAL
54A-533
STEP 5. Check the clock spring.
Check whether the clock spring is in good condition (Refer to
GROUP 52B, Driver’s air bag module and clock spring
).
Q: Is the check result normal?
YES : Go to Step 6.
NO : Replace the clock spring.
STEP 6. Check the wiring harness between steering wheel
audio remote control switch connector C-213 (terminal 1)
and clock spring connector C-202 (terminal 1).
• Check the power supply lines.
Q: Is the wiring harness between steering wheel audio
remote control switch connector C-213 (terminal 1) and
clock spring connector C-202 (terminal 1) in good
condition?
YES : Go to Step 7.
NO : The wiring harness may be damaged or the
connector(s) may have loose, corroded or damaged
terminals, or terminals pushed back in the connector.
Repair the wiring harness as necessary.
STEP 7. Check combination meter connector C-04 for
loose, corroded or damaged terminals, or terminals
pushed back in the connector.
Q: Is combination meter connector C-04 in good
condition?
YES : Go to Step 8.
NO : Repair or replace the damaged component (Refer to
GROUP 00E, Harness Connector Inspection
STEP 8. Check the wiring harness between combination
meter connector C-04 (terminal 23) and clock spring
connector C-205 (terminal 6).
• Check the power supply lines.
Q: Is the wiring harness between combination meter
connector C-04 (terminal 23) and clock spring
connector C-205 (terminal 6) in good condition?
YES : Go to Step 9.
NO : The wiring harness may be damaged or the
connector(s) may have loose, corroded or damaged
terminals, or terminals pushed back in the connector.
Repair the wiring harness as necessary.
STEERING WHEEL AUDIO REMOTE CONTROL SWITCH
TSB Revision
CHASSIS ELECTRICAL
54A-534
STEP 9. Retest the system
Check whether the illumination of the steering wheel audio
remote control switch comes on normally.
Q: Doe the illumination of the steering wheel audio remote
control switch comes on normally?
YES : The trouble can be an intermittent malfunction (Refer
to GROUP 00, How to use
Troubleshooting/inspection Service Points, How to
Cope with Intermittent Malfunction
NO : Replace the steering wheel audio remote control
switch.
REMOVAL AND INSTALLATION
M1544015600119
CAUTION
• To remove the driver air bag module, refer to GROUP 52B − Service Precautions
Driver’s Air Bag Module and Clock Spring
.
• When the steering wheel sensor is replaced, always carry out calibration to make ASC-ECU learn
the neutral point. (Refer to GROUP 35C
− On-vehicle Service-Steering Wheel Sensor Calibration
.)
Pre-removal operation
• Removal of garnish (Refer to GROUP37 − Steering wheel
Post-installation operation
• Installation of garnish (Refer to GROUP37 − Steering
wheel
AC709217AB
AC709217
1
Removal Step
1.
Steering wheel audio remote
control switch
STEERING WHEEL AUDIO REMOTE CONTROL SWITCH
TSB Revision
CHASSIS ELECTRICAL
54A-535
STREERING WHEEL AUDIO REMOTE CONTROL
SWITCH INSPECTION
M1544015700127
Use an ohmmeter to measure the resistance value between the
terminal.
On the steering wheel audio remote control switch connector,
check the continuity between terminals.
Switch Position
Tester
Connection
Measurement Value
No push
2
− 3
Approximately 3.1 k
Ω
2
− 4
Approximately 71 k
Ω
"Mode" switch
Approximately 270
Ω
"CH up" switch
Approximately 740
Ω
"CH down" switch
Approximately 1.3 k
Ω
"VOL up" switch
Approximately 2.1 k
Ω
"VOL down" switch
Approximately 3.1 k
Ω
Tester Connection
Normal condition
1
− 5
Continuity exists (2 ohms
or less)
MODE
AC705503
“VOL up” switch
“CH up”
switch
“CH down”
switch
“Mode” switch
AB
“VOL down”
switch
AC705502
AB
SATELLITE RADIO TUNER
TSB Revision
CHASSIS ELECTRICAL
54A-536
SATELLITE RADIO TUNER
GENERAL INFORMATION
M1544000100271
SATELLITE RADIO
• The satellite radio is a broadcast technology that
offers a clear digital sound directly by using satel-
lites.
• The registered service provider is SIRIUS™ satel-
lite radio.
• This service offers listeners more than 100 pro-
grams such as news, sports, music, and enter-
tainment.
SPECIAL TOOLS
M1544000600577
Tool
Tool number and
name
Supersession
Application
MB991958
a. MB991824
b. MB991827
c. MB991910
d. MB991911
e. MB991914
f. MB991825
g. MB991826
M.U.T.-III
sub-assembly
a. Vehicle
communication
interface (V.C.I.)
b. M.U.T.-III USB
cable
c. M.U.T.-III main
harness A
(Vehicles with
CAN
communication
system)
d. M.U.T.-III main
harness B
(Vehicles without
CAN
communication
system)
e. M.U.T.-III main
harness C (for
Daimler Chrysler
models only)
f. M.U.T.-III
measurement
adapter
g. M.U.T.-III trigger
harness
MB991824-KIT
NOTE: G: MB991826
M.U.T.-III Trigger
Harness is not
necessary when
pushing V.C.I. ENTER
key.
CAUTION
M.U.T.-III main harness A
(MB991910) should be used.
M.U.T.-III main harness B and C
should not be used for this
vehicle.
CAN bus diagnostics or data list
check.
MB991910
MB991826
MB991958
MB991911
MB991914
MB991824
MB991827
MB991825
DO NOT USE
a
b
c
d
e
f
g
DO NOT USE
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст