Mitsubishi Evolution X. Manual — part 1132
DIAGNOSIS
TSB Revision
CONTROLLER AREA NETWORK (CAN)
54C-163
STEP 8. Check the wiring harness between joint connector
(CAN1) C-105 and A/C-ECU connector C-22 for a short to
ground. Measure the resistance at joint connector (CAN1)
C-105.
(1) Disconnect joint connector (CAN1), and measure the
resistance at the wiring harness side of joint connector
(CAN1).
(2) Measure the resistance between joint connector (CAN1)
terminal 1 and body ground.
OK: 1 kilo ohm or more
(3) Measure the resistance between joint connector (CAN1)
terminal 12 and body ground.
OK: 1 kilo ohm or more
Q: Do all the resistances measure 1 kilo ohm or more?
YES (vehicles without MMCS) : Go to Step 9.
YES (vehicles with MMCS) : Go to Step 10.
NO : Go to Step 30.
STEP 9. Check the wiring harness between joint connector
(CAN1) C-105 and radio and CD player or CD changer
connector C-107 for a short to ground. Measure the
resistance at joint connector (CAN1) C-105.
(1) Disconnect joint connector (CAN1), and measure the
resistance at the wiring harness side of joint connector
(CAN1).
(2) Measure the resistance between joint connector (CAN1)
terminal 5 and body ground.
OK: 1 kilo ohm or more
AC608179
TEST
HARNESS
Harness side: C-105
CK
AC608179
Harness side: C-105
CL
TEST
HARNESS
AC608179
TEST
HARNESS
Harness side: C-105
CM
DIAGNOSIS
TSB Revision
CONTROLLER AREA NETWORK (CAN)
54C-164
(3) Measure the resistance between joint connector (CAN1)
terminal 16 and body ground.
OK: 1 kilo ohm or more
Q: Do all the resistances measure 1 kilo ohm or more?
YES <vehicles without satellite radio> : Go to Step 12.
YES <vehicles with satellite radio> : Go to Step 11.
NO : Go to Step 31.
STEP 10. Check the wiring harness between joint
connector (CAN1) C-105 and CAN box unit connector C-15
for a short to ground. Measure the resistance at joint
connector (CAN1) C-105.
(1) Disconnect joint connector (CAN1), and measure the
resistance at the wiring harness side of joint connector
(CAN1).
(2) Measure the resistance between joint connector (CAN1)
terminal 5 and body ground.
OK: 1 kilo ohm or more
(3) Measure the resistance between joint connector (CAN1)
terminal 16 and body ground.
OK: 1 kilo ohm or more
Q: Do all the resistances measure 1 kilo ohm or more?
YES (vehicles without satellite radio) : Go to Step 12.
YES (vehicles with satellite radio) : Go to Step 11.
NO : Go to Step 32.
AC608179
Harness side: C-105
CN
TEST
HARNESS
AC608179
TEST
HARNESS
Harness side: C-105
CM
AC608179
Harness side: C-105
CN
TEST
HARNESS
DIAGNOSIS
TSB Revision
CONTROLLER AREA NETWORK (CAN)
54C-165
STEP 11. Check the wiring harness between joint
connector (CAN1) C-105 and satellite radio tuner
connector C-18 for a short to ground. Measure the
resistance at joint connector (CAN1) C-105.
(1) Disconnect joint connector (CAN1), and measure the
resistance at the wiring harness side of joint connector
(CAN1).
(2) Measure the resistance between joint connector (CAN1)
terminal 2 and body ground.
OK: 1 kilo ohm or more
(3) Measure the resistance between joint connector (CAN1)
terminal 13 and body ground.
OK: 1 kilo ohm or more
Q: Do all the resistances measure 1 kilo ohm or more?
YES : Go to Step 12.
NO : Go to Step 33.
STEP 12. Check the wiring harness between joint
connector (CAN1) C-105 and ETACS-ECU connector C-301
for a short to ground. Measure the resistance at joint
connector (CAN1) C-105.
(1) Disconnect joint connector (CAN1) and ETACS-ECU
connector C-301, and measure the resistance at the wiring
harness side of joint connector (CAN1).
(2) Measure the resistance between joint connector (CAN1)
terminal 6 and body ground.
OK: 1 kilo ohm or more
AC608179
TEST
HARNESS
Harness side: C-105
CO
AC608179
Harness side: C-105
CP
TEST
HARNESS
AC608179
TEST
HARNESS
Harness side: C-105
CQ
DIAGNOSIS
TSB Revision
CONTROLLER AREA NETWORK (CAN)
54C-166
(3) Measure the resistance between joint connector (CAN1)
terminal 19 and body ground.
OK: 1 kilo ohm or more
Q: Do all the resistances measure 1 kilo ohm or more?
YES : Go to Step 34.
NO : Repair the wiring harness between joint connector
(CAN1) C-105 and ETACS-ECU connector C-301.
STEP 13. Check the wiring harness between joint
connector (CAN1) C-105 and combination meter connector
C-04 for a short to power supply. Measure the voltage at
joint connector (CAN1) C-105.
CAUTION
A digital multimeter should be used. For details refer to
CAUTION
The test wiring harness should be used. For details refer to
(1) Disconnect joint connector (CAN1), and measure the
voltage at the wiring harness side of joint connector
(CAN1).
(2) Turn the ignition switch to the ON position.
(3) Measure the voltage between joint connector (CAN1)
terminal 3 and body ground.
OK: 4.7 volts or less
(4) Measure the voltage between joint connector (CAN1)
terminal 14 and body ground.
OK: 4.7 volts or less
Q: Do all the voltages measure 4.7 volts or less?
YES (vehicles with KOS) : Go to Step 14.
YES (vehicles with WCM) : Go to Step 15.
NO (vehicles with KOS and WCM) : Go to Step 24.
AC608179
Harness side: C-105
CR
TEST
HARNESS
AC608178
TEST
HARNESS
Harness side: C-105
BH
AC608178
Harness side: C-105
BI
TEST
HARNESS
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст