Mitsubishi Evolution X. Manual — part 974
DOME LIGHT
TSB Revision
CHASSIS ELECTRICAL
54A-257
STEP 3. Using scan tool MB991958, check data list.
Use the ETACS-ECU data list to check the signals related to
the interior light auto-cut function.
• Turn the ignition switch to the "ACC" position.
• Turn the ignition switch to the "LOCK" (OFF) position.
• Open each door.
• Open the trunk lid.
Q: Does scan tool MB991958 display the items "IG
voltage", "ACC switch", "As door ajar switch", "RR door
ajar switch", and "RL door ajar switch" as normal
condition?
YES : (Normal conditions are displayed for all items.) Go to
Step 4.
NO : (Normal condition is not displayed.) Troubleshoot the
ETACS-ECU. Refer to ETACS, Diagnosis, Input
signal chart
.
STEP 4. Retest the system.
Check that the interior light automatic shutdown function works
normally.
Q: Is the check result normal?
YES : The trouble can be an intermittent malfunction (Refer
to GROUP 00, How to use
Troubleshooting/inspection Service Points, How to
Cope with Intermittent Malfunction
NO : Replace the ETACS-ECU.
Item No.
Item name
Normal condition
Item 254
IG voltage
0 V
Item 288
ACC switch
OFF
Item 256
Dr door ajar switch
Open
Item 257
As door ajar switch
Open
Item 258
RR door ajar switch
Open
Item 259
RL door ajar switch
Open
Item 260
Trunk/gate trunk ajar
switch
Open
DOME LIGHT
TSB Revision
CHASSIS ELECTRICAL
54A-258
ON-VEHICLE SERVICE
CUSTOMIZATION FUNCTION
M1541301200303
By operating the ETACS system or MMCS of scan
tool MB991958, the following functions can be pro-
grammed. The programmed information is held even
when the battery is disconnected.
Adjustment
item (scan tool
MB991958
display)
Adjustment item
Adjusting contents
(scan tool MB991958
display)
Adjusting contents
Dome light
delay timer with
door
Adjustment of
interior light delay
shutdown time
0 sec
0 second (no delay shutdown time)
7.5 sec
7.5 seconds
15 sec
15 seconds
30 sec
30 seconds (default)
60 sec
60 seconds
120 sec
120 seconds
180 sec
180 seconds
Interior light
auto cut timer
Adjustment of
interior light
automatic shutdown
function operation
time
Disable
No function
3 min
3 minutes
30 min
30 minutes (default)
60 min
60 minutes
DOME LIGHT
TSB Revision
CHASSIS ELECTRICAL
54A-259
DOME LIGHT REMOVAL AND INSTALLATION
M1541302700099
AC709278AB
9
1
2
3
4
5
6
7
8
Clip
Section A - A
3
A
A
2
Note
: Clip positions
A
A
Removal Steps
1.
Front dome light lens
2.
Dome light bulb
<<
A
>>
3.
Front dome light
4.
Front dome light cover
5.
Microphone unit <Vehicles with
hands-free cellular phone system>
6.
Sunroof switch <Vehicles with
sunroof>
7.
Rear dome light lens
8.
Dome light bulb
9.
Rear dome light
Removal Steps (Continued)
DOME LIGHT
TSB Revision
CHASSIS ELECTRICAL
54A-260
REMOVAL SERVICE POINT
.
<<A>> FRONT DOME LIGHT REMOVAL
While pressing the front dome light toward the rear of the vehi-
cle, slide the front side of the front dome light downward, and
remove the front dome light.
LUGGAGE COMPARTMENT LIGHT REMOVAL AND INSTALLATION
M1541302600014
AC705372
A
A
AC
Clip
Claw
Section A – A
Front dome light
Bracket
Front dome light
Headlining
Forward of vehicle
A
A
AC610327AB
1
2
A
A
Section A - A
1
Removal Steps
1.
Luggage compartment light lens
2.
Luggage compartment light bulb
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст