Mitsubishi Evolution X. Manual — part 864
PARKING BRAKE LEVER
TSB Revision
PARKING BRAKES
36-13
PARKING BRAKE LEVER
REMOVAL AND INSTALLATION
M1361001300846
Pre-removal operation
Floor Console Assembly Removal (Refer to GROUP 52A
−
Floor Console Assembly
).
Post-installation operation
• Parking Brake Lever Stroke Check (Refer to
• Floor Console Assembly Installation (Refer to GROUP
52A
− Floor Console Assembly
AC706395AB
A
B
B
C
D
D
1
3
5
4
2
C
A
N
Section A – A
Section B – B
Section C – C
Section D – D
20 ± 5 N·m
15 ± 3 ft-lb
20 ± 5 N·m
15 ± 3 ft-lb
Removal steps
1.
Parking brake switch connector
<<
A
>>
>>
A
<<
2.
Parking brake rear cable
connection
3.
Parking brake lever assembly
4.
Parking brake switch
5.
Adjusting nut
REMOVAL SERVICE POINT
.
<<A>> PARKING BRAKE REAR CABLE CONNEC-
TION REMOVAL
Disconnect the parking brake rear cable according to the pro-
cedure below.
1. Release the parking brake, and loosen the adjusting nut.
Removal steps (Continued)
AC609694AB
Floor console
bracket rear
PARKING BRAKE LEVER
TSB Revision
PARKING BRAKES
36-14
2. Remove the floor console bracket rear mounting bolt.
AC609689AD
Floor console
bracket rear
3. Slide the floor console bracket rear, and disconnect the
parking brake rear cable through the hole indicated with an
arrow in the figure.
INSTALLATION SERVICE POINT
.
>>A<< PARKING BRAKE REAR CABLE CONNEC-
TION INSTALLATION
AC609694AC
Floor console
bracket rear
9.5 ± 3.5 N·m
84 ± 31 in-lb
9.5 ± 3.5 N·m
84 ± 31 in-lb
Connect the parking brake rear cable, and tighten the floor con-
sole bracket rear mounting bolt to the specified torque.
Tightening torque: 9.5
± 3.5 N⋅ m (84 ± 31 in-lb)
PARKING BRAKE CABLE
TSB Revision
PARKING BRAKES
36-15
PARKING BRAKE CABLE
REMOVAL AND INSTALLATION
M1361001901379
Pre-removal operation
• Floor Console Assembly Removal (Refer to GROUP 52A
− Floor Console Assembly
).
• Rear Seat Cushion Assembly Removal (Refer to GROUP
52A
− Rear Seat Assembly
).
• Shoe and Lining Assembly Removal (Refer to
).
• Front Floor Under Cover Removal (Refer to GROUP 51 −
Under Cover
Post-installation operation
• Front Floor Under Cover Installation (Refer to GROUP 51
− Under Cover
).
• Shoe and Lining Assembly Installation (Refer to
).
• Rear Seat Cushion Assembly Installation (Refer to
GROUP 52A
).
• Floor Console Assembly Installation (Refer to GROUP
52A
− Floor Console Assembly
• Parking Brake Lever Stroke Adjustment (Refer to
AC707373AB
1
3
N
2
3
N
4
2
13 ± 2 N·m
111 ± 22 in-lb
11 ± 2 N·m
98 ± 17 in-lb
11 ± 2 N·m
98 ± 17 in-lb
11 ± 2 N·m
98 ± 17 in-lb
11 ± 2 N·m
98 ± 17 in-lb
Removal steps
<<
A
>>
>>
A
<<
1.
Parking brake rear cable
connection
2.
Clip
3.
O-ring
4.
Parking brake rear cable
REMOVAL SERVICE POINT
.
<<A>> PARKING BRAKE REAR CABLE CONNEC-
TION REMOVAL
Disconnect the parking brake rear cable according to the pro-
cedure below.
1. Release the parking brake, and loosen the adjusting nut.
Removal steps (Continued)
AC609694AB
Floor console
bracket rear
PARKING BRAKE CABLE
TSB Revision
PARKING BRAKES
36-16
2. Remove the floor console bracket rear mounting bolt.
AC609689AD
Floor console
bracket rear
3. Slide the floor console bracket rear, and disconnect the
parking brake rear cable through the hole indicated with an
arrow in the figure.
INSTALLATION SERVICE POINT
.
>>A<< PARKING BRAKE REAR CABLE CONNEC-
TION INSTALLATION
AC609694AC
Floor console
bracket rear
9.5 ± 3.5 N·m
84 ± 31 in-lb
9.5 ± 3.5 N·m
84 ± 31 in-lb
Connect the parking brake rear cable, and tighten the floor con-
sole bracket rear mounting bolt to the specified torque.
Tightening torque: 9.5
± 3.5 N⋅ m (84 ± 31 in-lb)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст