Mitsubishi Evolution X. Manual — part 1087
PANIC ALARM
TSB Revision
CHASSIS ELECTRICAL
54A-709
DIAGNOSIS
STANDARD FLOW OF DIAGNOSTIC
TROUBLESHOOTING
M1547001200184
Refer to GROUP 00
− Contents of troubleshooting
DIAGNOSTIC FUNCTION
M1547001300051
HOW TO CONNECT THE SCAN TOOL (M.U.T.-III)
Required Special Tools:
• MB991958: Scan Tool (M.U.T.-III Sub Assembly)
• MB991824: Vehicle Communication Interface (V.C.I.)
• MB991827: M.U.T.-III USB Cable
• MB991910: M.U.T.-III Main Harness A (Vehicles with
CAN communication system)
CAUTION
To prevent damage to scan tool MB991958, always turn the
ignition switch to the "LOCK" (OFF) position before con-
necting or disconnecting scan tool MB991958.
1. Ensure that the ignition switch is at the "LOCK" (OFF)
position.
2. Start up the personal computer.
3. Connect special tool MB991827 to special tool MB991824
and the personal computer.
4. Connect special tool MB991910 to special tool MB991824.
5. Connect special tool MB991910 to the data link connector.
6. Turn the power switch of special tool MB991824 to the "ON"
position.
NOTE: When special tool MB991824 is energized, special
tool MB991824 indicator light will be illuminated in a green
color.
7. Start the scan tool system on the personal computer.
NOTE: Disconnecting scan tool MB991958 is the reverse of the
connecting sequence, making sure that the ignition switch is at
the "LOCK" (OFF) position.
HOW TO READ AND ERASE DIAGNOSTIC
TROUBLE CODES
Required Special Tools:
• MB991958: Scan Tool (M.U.T.-III Sub Assembly)
• MB991824: Vehicle Communication Interface (V.C.I.)
• MB991827: M.U.T.-III USB Cable
• MB991910: M.U.T.-III Main Harness A (Vehicles with
CAN communication system)
AC608435
Data link connector
MB991827
MB991824
MB991910
AB
PANIC ALARM
TSB Revision
CHASSIS ELECTRICAL
54A-710
CAUTION
To prevent damage to scan tool MB991958, always turn the
ignition switch to the "LOCK" (OFF) position before con-
necting or disconnecting scan tool MB991958.
NOTE: If the battery voltage is low, diagnostic trouble codes will
not be set. Check the battery if scan tool MB991958 does not
display.
1. Connect scan tool MB991958 to the data link connector.
2. Turn the ignition switch to the "ON" position.
3. Select "System select" from the start-up screen.
4. Select "From 2006 MY" of "Model Year." When the "Vehicle
Information" is displayed, check the contents.
5. Select "ETACS" from "System List", and press the "OK"
button.
NOTE: When the "Loading Option Setup" list is displayed,
check the applicable item.
6. Select "Diagnostic Trouble Code."
7. If a DTC is set, it is shown.
8. Choose "Erase DTCs" to erase the DTC.
TROUBLE SYMPTOM CHART
M1547001500282
SYMPTOM PROCEDURES
Panic alarm does not work normally.
.
TECHNICAL DESCRIPTION (COMMENT)
If keyless operation system <KOS> or keyless entry
system <WCM> is normal, the ETACS-ECU may be
defective.
.
TROUBLESHOOTING HINTS
• Keyless operation system <KOS> or keyless
entry system <WCM> may be defective
• The ETACS-ECU may be defective
• Function is not set with the customization.
DIAGNOSIS
Required Special Tools:
• MB991958 Scan Tool (M.U.T.-III Sub Assembly)
• MB991824: Vehicle Communication Interface (V.C.I.)
• MB991827 M.U.T.-III USB Cable
• MB991910 M.U.T.-III Main Harness A (Vehicles with
CAN communication system)
Trouble symptom
Reference
page
Panic alarm does not work normally.
PANIC ALARM
TSB Revision
CHASSIS ELECTRICAL
54A-711
STEP 1. Check if the theft-alarm is normally set and the
exterior protection can be executed.
Check that the theft-alarm works normally.
Q: Does the theft-alarm work normally?
YES : Go to Step 2.
NO : Troubleshoot the theft-alarm (Refer to
STEP 2. Using scan tool MB991958, read the diagnostic
trouble code.
Check if DTC is set to the KOS-ECU <Vehicles with KOS> or
WCM <Vehicles with WCM>.
CAUTION
To prevent damage to scan tool MB991958, always turn the
ignition switch to the "LOCK" (OFF) position before con-
necting or disconnecting scan tool MB991958.
(1) Connect scan tool MB991958. Refer to "How to connect the
scan tool (M.U.T.-III)
(2) Turn the ignition switch to the "ON" position.
(3) Check whether the KOS or WCM related DTC is set.
(4) Turn the ignition switch to the "LOCK" (OFF) position.
Q: Is the DTC set?
YES <vehicles with KOS> : Troubleshoot the KOS (Refer
to GROUP 42B, KOS
).
YES <vehicles with WCM> : Troubleshoot the WCM (Refer
to GROUP 42C, WCM
NO : Go to Step 3.
STEP 3. Check keyless operation system <KOS> or
keyless entry system <WCM>.
Q: Do keyless operation system <KOS> or keyless entry
system <WCM> work normally?
YES : Go to Step 4.
NO <vehicles with KOS> : Troubleshoot the KOS (Refer to
).
NO <vehicles with WCM> : Troubleshoot the WCM (Refer
to GROUP 42C, WCM
AC608435
Data link connector
MB991827
MB991824
MB991910
AB
PANIC ALARM
TSB Revision
CHASSIS ELECTRICAL
54A-712
STEP 4. Using scan tool MB991958, check the
configuration function.
(1) Turn the ignition switch to the "ON" position.
(2) Use the ETACS-ECU customization function to check that
the "Panic alarm switch" is set to "Enable".
(3) Turn the ignition switch to the "LOCK" (OFF) position.
Q: Is the "Panic alarm switch" set to "Enable"?
YES : Replace the ETACS-ECU.
NO : Use the ETACS-ECU customization function to set
the "Panic alarm switch" to "Enable"(Refer to
).
REMOVAL AND INSTALLATION
M1547002600044
Panic alarm system component parts
• Headlight assembly (Refer to
).
).
• Key reminder switch (Refer to
ON-VEHICLE SERVICE
CUSTOMIZATION FUNCTION
M1547003400214
By operating the ETACS system or MMCS of scan
tool MB991958, the following functions can be pro-
grammed. The programmed information is held even
when the battery is disconnected.
Adjustment item
(scan tool
display)
Adjustment item
Adjustment contents (scan tool
display)
Adjusting contents
Panic alarm switch With/without panic
alarm function
Disable
Without function
Enable
With function (default)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст