Mitsubishi Outlander XL. Manual — part 1190
Q:Is the check result satisfactory?
YES:
A poor connection, open circuit or other
intermittent malfunction is present in the lines between
the combination meter and the A/C-ECU (Refer to GROUP 00E,
Harness Connector Inspection P.00E-2.)
NO:
Replace the combination meter. On completion, check
that the DTC is not reset.
STEP 5. Recheck for diagnostic trouble code.
Check again if the DTC is set.
(1)
Turn the ignition switch to the "ON" position.
(2)
Check if the DTC is set.
(3)
Turn the ignition switch to the "LOCK" (OFF) position.
Q:Is the check result satisfactory?
YES:
A poor connection, open circuit or other
intermittent malfunction is present in the lines between
the combination meter and the A/C-ECU (Refer to GROUP 00E,
Harness Connector Inspection P.00E-2.)
NO:
Replace the A/C-ECU. On completion, check that the
DTC is not reset.
DTC U0168: WCM Time-out
M15502000953USA0000010000
If DTC U0168 is set in the A/C-ECU, diagnose the
CAN main bus line.
Whenever the ECU is replaced, ensure that the
communication circuit is normal.
TROUBLE JUDGMENT
The A/C-ECU receives the air conditioning control-
related signals from the WCM-ECU via the CAN bus
lines. If any of the air conditioning control-related
signals from the WCM-ECU cannot be received, the
diagnostic trouble code U0168 is stored.
TECHNICAL DESCRIPTION (COMMENT)
Current trouble
⦆
Connector(s) or wiring harness in the CAN bus lines
between the WCM-ECU and the A/C-ECU, the
power supply system to the WCM-ECU, the WCM-
ECU itself, or the A/C-ECU may be defective.
Past trouble
⦆
If DTC U0168 is stored as a past trouble, carry out
diagnosis with particular emphasis on wiring and
connector(s) in the CAN bus line between the A/C-
ECU and the WCM-ECU, and the power supply
system to the WCM-ECU. If the connectors and
wiring are normal, and obviously the ECU is the
cause of the trouble, replace the ECU. If in doubt,
do not replace the ECU.
NOTE:
For a past trouble, you cannot find it by
the scan tool CAN bus diagnostics even if there
is a failure in CAN bus lines. In this case,
refer to GROUP 00, How to Use Troubleshooting/
Inspection Service Points - How to Cope with
Intermittent Malfunctions P.00-15) and check
the CAN bus lines. You can narrow down the
possible cause of the trouble by referring to
the DTC, which is set regarding the CAN
communication-linked ECUs (Refer to GROUP 54D,
Explanation about the scan too CAN bus
diagnostics P.54D-10).
TROUBLESHOOTING HINTS
⦆
Malfunction of the WCM-ECU
⦆
Malfunction of the A/C-ECU
⦆
Damaged harness wires and connectors
AIR CONDITIONING
55A-51
MANUAL A/C DIAGNOSIS
DIAGNOSIS
Required Special Tools:
⦆
MB991223: Harness Set
⦆
MB992006: Extra Fine Probe
⦆
MB991958: Scan Tool (M.U.T.-III Sub Assembly)
⦆
MB991824: V.C.I.
⦆
MB991827: M.U.T.-III USB Cable
⦆
MB991910: M.U.T.-III Main Harness A
STEP 1. Using scan tool MB991958, diagnose the CAN bus
line
ZC501967
AC404789
ZC5019680000
MB991824
MB991827
MB991910
Data link
connector
To prevent damage to scan tool MB991958, always turn the
ignition switch to the "LOCK" (OFF) position before
connecting or disconnecting scan tool MB991958.
(1)
Connect scan tool MB991958. Refer to "How to connect the
Scan Tool (M.U.T.-III) P.55A-6."
(2)
Turn the ignition switch to the "ON" position.
(3)
Diagnose the CAN bus line.
(4)
Turn the ignition switch to the "LOCK" (OFF) position.
Q:Is the CAN bus line found to be normal?
YES:
Go to Step 2.
NO:
Repair the CAN bus line. (Refer to GROUP 54D,
STEP 2. Using scan tool MB991958 read the WCM-ECU
diagnostic trouble code.
Check whether an WCM-ECU DTCs are set or not.
(1)
Turn the ignition switch to the "ON" position.
(2)
Check for WCM-ECU DTCs.
(3)
Turn the ignition switch to the "LOCK" (OFF) position.
Q:Is the check result satisfactory?
YES:
Go to Step 3.
NO:
Diagnose the WCM-ECU (Refer to GROUP 42C, Diagnostic
STEP 3. Using scan tool MB991958, check for any
diagnostic trouble code.
Check if a DTC, which relates to CAN communication-linked
systems below, is set.
⦆
ETACS-ECU
DTC indicating a time-out error related to the WCM-ECU
system
(1)
Turn the ignition switch to the "ON" position.
55A-52
AIR CONDITIONING
MANUAL A/C DIAGNOSIS
(2)
Check for a DTC related to the relevant system.
(3)
Turn the ignition switch to the "LOCK" (OFF) position.
Q:Is the check result satisfactory?
YES:
Go to Step 5.
NO:
Go to Step 4.
STEP 4. Recheck for diagnostic trouble code.
Check again if the DTC is set.
(1)
Turn the ignition switch to the "ON" position.
(2)
Check if the DTC is set.
(3)
Turn the ignition switch to the "LOCK" (OFF) position.
Q:Is the check result satisfactory?
YES:
A poor connection, open circuit or other
intermittent malfunction is present in the lines between
the WCM-ECU and the A/C-ECU (Refer to GROUP 00E, Harness
Connector Inspection P.00E-2.)
NO:
Replace the WCM-ECU. On completion, check that the
DTC is not reset.
STEP 5. Recheck for diagnostic trouble code.
Check again if the DTC is set.
(1)
Turn the ignition switch to the "ON" position.
(2)
Check if the DTC is set.
(3)
Turn the ignition switch to the "LOCK" (OFF) position.
Q:Is the check result satisfactory?
YES:
A poor connection, open circuit or other
intermittent malfunction is present in the lines between
the WCM-ECU and the A/C-ECU (Refer to GROUP 00E, Harness
Connector Inspection P.00E-2.)
NO:
Replace the A/C-ECU. On completion, check that the
DTC is not reset.
DTC U0184: Audio Time-out
M15502000954USA0000010000
If DTC U0184 is set in the A/C-ECU, diagnose the
CAN main bus line.
Whenever the ECU is replaced, ensure that the
communication circuit is normal.
TROUBLE JUDGMENT
The A/C-ECU receives air conditioning operation-
related signals from the audio via the CAN bus lines.
If any of the air conditioning control-related signals
from the audio cannot be received, the diagnostic
trouble code U0184 is stored.
TECHNICAL DESCRIPTION (COMMENT)
Current trouble
⦆
Connector(s) or wiring harness in the CAN bus lines
between the Audio and the A/C-ECU, the power
supply system to the Audio, the Audio itself, or the
A/C-ECU may be defective.
AIR CONDITIONING
55A-53
MANUAL A/C DIAGNOSIS
Past trouble
⦆
If DTC U0184 is stored as a past trouble, carry out
diagnosis with particular emphasis on wiring and
connector(s) in the CAN bus line between the A/C-
ECU and the Audio, and the power supply system
to the Audio. If the connectors and wiring are
normal, and obviously the ECU is the cause of the
trouble, replace the ECU. If in doubt, do not replace
the ECU.
NOTE:
For a past trouble, you cannot find it by
the scan tool CAN bus diagnostics even if there
is a failure in CAN bus lines. In this case,
refer to GROUP 00, How to Use Troubleshooting/
Inspection Service Points - How to Cope with
Intermittent Malfunctions P.00-15) and check
the CAN bus lines. You can narrow down the
possible cause of the trouble by referring to
the DTC, which is set regarding the CAN
communication-linked ECUs (Refer to GROUP 54D,
Explanation about the scan too CAN bus
diagnostics P.54D-10).
TROUBLESHOOTING HINTS
⦆
Malfunction of the Audio
⦆
Malfunction of the A/C-ECU
⦆
Damaged harness wires and connectors
DIAGNOSIS
Required Special Tools:
⦆
MB991223: Harness Set
⦆
MB992006: Extra Fine Probe
⦆
MB991958: Scan Tool (M.U.T.-III Sub Assembly)
⦆
MB991824: V.C.I.
⦆
MB991827: M.U.T.-III USB Cable
⦆
MB991910: M.U.T.-III Main Harness A
STEP 1. Using scan tool MB991958, diagnose the CAN bus
line
ZC501967
AC404789
ZC5019680000
MB991824
MB991827
MB991910
Data link
connector
To prevent damage to scan tool MB991958, always turn the
ignition switch to the "LOCK" (OFF) position before
connecting or disconnecting scan tool MB991958.
(1)
Connect scan tool MB991958. Refer to "How to connect the
Scan Tool (M.U.T.-III) P.55A-6."
(2)
Turn the ignition switch to the "ON" position.
(3)
Diagnose the CAN bus line.
(4)
Turn the ignition switch to the "LOCK" (OFF) position.
Q:Is the CAN bus line found to be normal?
YES:
Go to Step 2.
NO:
Repair the CAN bus line. (Refer to GROUP 54D,
STEP 2. Using scan tool MB991958 read the Audio
diagnostic trouble code.
Check whether an audio DTCs are set or not.
(1)
Turn the ignition switch to the "ON" position.
(2)
Check for Audio DTCs.
55A-54
AIR CONDITIONING
MANUAL A/C DIAGNOSIS
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст