Mitsubishi Outlander XL. Manual — part 587

ENGINE MOUNTING

REMOVAL AND INSTALLATION

M13201000011USA0000010000

*: Indicates parts which should be initially
tightened, and then fully tightened after placing

the vehicle horizontally and loading the full weight
of the engine on the vehicle body.

Pre-removal operation

｠

Radiator Condenser Tank Removal (Refer to GROUP 14,

Radiator P.14-27).

｠

Power Steering Oil Pump Assembly Removal (Refer to

GROUP 37, Power Steering Oil Pump Assembly P.37-34).

｠

Raise the engine and transaxle assembly until its weight is not

applied to the insulator, and support it securely.

Post-installation operation

｠

Power Steering Oil Pump Assembly Installation (Refer to

GROUP 37, Power Steering Oil Pump Assembly P.37-34).

｠

Radiator Condenser Tank Installation (Refer to GROUP 14,

Radiator P.14-27).

AC506146

ZC600538AA00

1

2

2

3

50 ± 5 N·m
37 ± 4 ft-lb

82 ± 8 N·m
60 ± 5 ft-lb

100 ± 5 N·m*
74 ± 4 ft-lb*

Removal steps

1.

Engine mounting bracket

>>A<<

2.

Engine mounting insulator stopper

Removal steps

3.

Engine mounting insulator

POWER PLANT MOUNT

32-3

ENGINE MOUNTING

INSTALLATION SERVICE POINT

>>A<< ENGINE MOUNTING INSULATOR STOPPER
INSTALLATION

ZC6019630000

Engine side

Engine mounting insulator

Engine mounting
insulator stopper

Engine mounting
bracket

Install the engine mounting insulator stopper as shown in the
figure.

TRANSAXLE (TRANSMISSION) MOUNTING

REMOVAL AND INSTALLATION

M13201000014USA0000010000

*: Indicates parts which should be initially
tightened, and then fully tightened after placing

the vehicle horizontally and loading the full weight
of the transaxle on the vehicle body.

Pre-removal operation

｠

Battery and Battery Tray Removal

｠

Air Cleaner Assembly Removal (Refer to GROUP 15, Air

Cleaner P.15-6).

｠

Engine Control Module (ECM) Removal [Refer to GROUP

13Aa, Engine Control Module (ECM) P.13Aa-37].

｠

Raise the engine and transaxle assembly until its weight is not

applied to the insulator, and support it securely.

Post-installation operation

｠

Engine Control Module (ECM) Installation [Refer to GROUP

13Aa, Engine Control Module (ECM) P.13Aa-37].

｠

Air Cleaner Assembly Installation (Refer to GROUP 15, Air

Cleaner P.15-6).

｠

Battery and Battery Tray Installation

32-4

POWER PLANT MOUNT

TRANSAXLE (TRANSMISSION) MOUNTING

AC506147

ZC600540

50 ± 5 N·m
37 ± 4 ft-ld

1

2

2

3

AA00

50 ± 5 N·m
37 ± 4 ft-ld

47 ± 7 N·m
35 ± 5 ft-ld

95 ± 10 N·m*
70 ± 7 ft-lb*

Removal steps

1.

Transaxle mounting bracket

·

Transfer assembly <AWD> (Refer to
GROUP 23A, Transfer Assembly P.
23A-176).

Removal steps

>>A<<

2.

Transaxle mounting insulator stopper

3.

Transaxle mounting insulator

INSTALLATION SERVICE POINT

>>A<< TRANSAXLE MOUNTING INSULATOR STOPPER
INSTALLATION

ZC6019780000

Engine side

Transaxle
mounting
insulator

Transaxle
mounting
insulator
stopper

Transaxle
mounting
bracket

Install the transaxle mounting insulator stopper as shown in the
figure.

POWER PLANT MOUNT

32-5

TRANSAXLE (TRANSMISSION) MOUNTING

ENGINE ROLL STOPPER AND CENTERMEMBER

REMOVAL AND INSTALLATION

M13201000023USA0000010000

｠

*1: Indicates parts which should be initially
tightened, and then fully tightened after placing
the vehicle horizontally and loading the full
weight of the engine and transaxle assembly on
the vehicle body.

｠

*2: Indicates parts are the bolts with friction
coefficient stabilizer. In removal, ensure there is
no damage, clean dust and soiling from bearing
and thread surfaces, and tighten them to the
specified torque.

Pre-removal and post-installation operation

｠

Engine Room Under Cover Front Removal and Installation (Refer to GROUP 51A, Under Cover P.51A-18).

ZC600574

1

4

2

5

3

6

7

8

AA00

50 ± 5 N·m
37 ± 4 ft-lb

50 ± 5 N·m
37 ± 4 ft-lb

N

N

1

2

<FWD>

<AWD>

2

1

2

2

53 ± 8 N·m
39 ± 6 ft-lb

70 ± 10 N·m*
52 ± 7 ft-lb*

53 ± 8 N·m*
39 ± 5 ft-lb*

70 ± 10 N·m*
52 ± 7 ft-lb*

Front

roll

stopper

and

centermember removal steps

1.

Flange nut

2.

Centermember and body connection

3.

Centermember and crossmember
connection

Front

roll

stopper

and

centermember removal steps

4.

Front roll stopper and centermember
assembly

5.

Centermember

>>A<<

6.

Front roll stopper

32-6

POWER PLANT MOUNT

ENGINE ROLL STOPPER AND CENTERMEMBER