Mitsubishi Outlander XL. Manual — part 1313
GENERAL INFORMATION
M25100000001USA0000010000
Both high driving performance and great utilities are
achieved to establish the "On-road SUV style" that
provides the all round cruising performance.
⦆
Harmonizing the tough functionality as an SUV with
sporty driving performance exceeding an SUV
⦆
Front face design creates sharp shape that is robust
and handsome
FEATURES
BETTER APPEARANCE
1. Newly designed front three-diamond mark
2. Front bumper extension appealing the robust
front mask
3. Overfender shape to keep the off-road image
4. Side air dam
5. Liftgate spoiler (with the integral high mounted
stop light)
6. Plastic arm for the rear wiper
BETTER AERODYNAMIC CHARACTERISTICS
7. Overfender shape to improve the aerodynamic
performance
8. Side air dam
9. Liftgate spoiler
10. Low air resistance large size door mirrors
IMPROVEMENT OF COOLING EFFICIENCY
11. Air guide duct to cool the radiator has been
installed behind the front bumper.
BETTER USER-FRIENDLINESS
12. Heated door mirrors
13. Roof rails
BETTER PRODUCT PACKAGE
14. Pad (front bumper core) has been installed in
the front bumper to reduce the severity of an injury
in an accident with pedestrians.
15.
Vehicle
speed-dependent
intermittent
windshield wiper system
16. Rear intermittent wiper with an initial continuous
operation and reverse gear-linked operation
functions
17. Liftgate garnishes
18. Divided structure for partial replacement for the
front/rear bumper damage
SUPPORT RECYCLING OF RESOURCES
Aggressively uses PP (polypropylene) materials that
are easy to recycle and easy to stamp material
symbols on the plastic (resin) parts.
ZC501829
6,16
10,12
5,9
4,8
15
3,7
3,7
18
11
13
1
14
2
0005
17
19
51-2
EXTERIOR
GENERAL INFORMATION
BUMPER
M25100000020USA0000010000
CONSTRUCTION DIAGRAM
ZC5018310000
A
A
Front bumper core
Air dam structure
(in front of tires)
Divided
structure
Divided structure
Front bumper
extension B
Front bumper
extension A (LH)
Front bumper
air guide duct
Front bumper
air guide duct
Front bumper
core
Front bumper face
Rear bumper face
Rear corner
bumper (LH)
Rear corner
bumper (RH)
Front bumper
side bracket
Rear bumper
side bracket
Rear bumper face
side bracket
<Front bumper>
<Rear bumper>
Section A-A
FRONT BUMPER
⦆
Divided structure has been adopted for the front
bumper to improve the partial replacement, cost
reduction in damaged parts replacement, and the
recycle efficiency in scrapping.
⦆
Resin front bumper side bracket has been adopted
to improve the alignment with the body.
⦆
Air dam structure in front of tires with the overhung
front bumper at the right and left corners suppress
the airflow against the tires and smoothen the
airflow along the bumper sides.
⦆
Pad (front bumper core) has been installed in the
upper part of the bumper to reduce the severity of
an injury in an accident with pedestrians.
⦆
Air guide duct has been installed behind the front
bumper to improve the radiator cooling efficiency.
REAR BUMPER
⦆
Divided structure has been adopted for the rear
bumper to improve the partial replacement, the cost
reduction in damaged parts replacement, and the
recycle efficiency in scrapping.
⦆
Resin rear bumper side bracket and resin rear
bumper face side bracket have been adopted to
improve the alignment with the body.
EXTERIOR
51-3
BUMPER
RADIATOR GRILLE
M25100000010USA0000010000
CONSTRUCTION DIAGRAM
ZC5018510000
Radiator grille
Front bumper
Front three-diamond
mark
Clip
Clip
⦆
The structure that allows the radiator grille to be
removed and installed only by clips at the top and
bottom has been adopted.
⦆
The newly designed front three-diamond mark is
protruded from the installation surface of the
radiator grille to improve the brand appeal.
51-4
EXTERIOR
AERO PARTS
AERO PARTS
M25100000030USA0000010000
CONSTRUCTION DIAGRAM
ZC5018290006
Door mirror
Side air dam
Overfender
shape
Overfender
shape
Liftgate spoiler
Roof drip molding
Air dam structure
(in front of tires)
Aerodynamic performance has been improved by the
optimized shape of the following parts.
⦆
Air dam structure in front of tires (Refer to P.51-3.)
⦆
Overfender shape
Overfender shape from the front bumper to the
fender and from the quarter panel to the rear
bumper keeps the off-road vehicle image as an
SUV, at the same time the optimized shape of the
related parts improves aerodynamic performance.
⦆
Door mirror
⦆
Roof drip molding
⦆
Side air dam
⦆
Liftgate spoiler (with built-in high-mount stop light)
EXTERIOR
51-5
GARNISHES
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст