Mitsubishi Outlander XL. Manual — part 1318
Item
Flat arrangement
Front and rear seat
ZC600244
Luggage
room
arrangement
Two
passengers
ride/maximum
luggage space
ZC600245
Three passengers ride/longer luggage
space
ZC600246
Three passengers ride/longer luggage
space (Rear seatback folded forward)
ZC600247
Five passengers ride/luggage space
ZC600248
52A-8
INTERIOR
SEAT
SEAT BELT
M25200000100USA0000010000
ZC604428
ELR 3-point seat belt
ELR/ALR 3-point seat belt (RH/LH)
ELR/ALR 3-point seat belt
0000
ELR/ALR 3-point seat belt
incorporated in seat
Seat belt retractor
(RH/Center/LH)
Seat belt retractor
Seat belt retractor
with a double pre-tensioner
and variable force limiter
Seat belt retractor
with a pre-tensioner
and variable force limiter
Seat belt retractor
(7-seater)
Three-point seat belt with ELR/ALR
(7-seater)
Seat belt warning lamp
Seat belt warning lamp
The seat belts offer the following features:
Front seat belt
⦆
For improved protection, the three-point seat belt
with ELR has been adopted together with a double
pre-tensioner (driver's side), three-point seat belt
with ELR/ALR has been adopted together with a the
pre-tensioner (front passenger's side), and variable
force limiter.
⦆
A seat belt warning light has been included on the
combination meter to encourage the driver to fasten
the seat belt when the belt is not connected.
⦆
A seat belt warning light has been included on the
center panel to encourage the passenger to fasten
the seat belt when the belt is not connected.
Rear seat belt
⦆
Three-point seat belts with ELR/ALR (child seat
fixing mechanism) changeover have been adopted.
⦆
With the seat-integrated three-point seat belt with
ELR/ALR changeover equipped to the center seat,
three-point seat belts have been adopted to all the
seats to improve safety.
INTERIOR
52A-9
SEAT BELT
Third seat belt
⦆
Three-point seat belt with ELR/ALR has been
installed.
Seat belt with variable force limiter
ZC6002400000
Displacement
Load
Conventional force limiter
Variable force limiter
The passenger restraint characteristics have been improved and
the energy absorption characteristics have been optimized to
improve the impact reduction performance.
TRIMS
INTERIOR TRIM
M25200000120USA0000010000
ZC6002370000
Cowl side trim
Front pillar trim
Upper center pillar trim
Upper quarter trim
Rear end trim
Lower quarter trim
Rear scuff plate
Lower center pillar trim
Front scuff plate
⦆
The interior trim is a full trim to improve quality.
⦆
The collision energy absorbing structure that is
integrated with a trim has been adopted to the pillar
trim. With the structure that reduces head injuries
upon the secondary impact against the cabin during
a collision, the safety has been improved.
⦆
Material codes are shown on trim to facilitate
recycling.
52A-10
INTERIOR
TRIMS
DOOR TRIM
M25200000123USA0000010000
ZC600236
<Rear door trim>
<Front door trim>
0000
Armrest
Armrest
Door pocket
Bottle holder
Door pocket
Bottle holder
The door trims offer the following features.
⦆
Break-proof resin material has been used for trim
panels, improving safety.
⦆
Bottle holders which can store a 500-ml plastic
bottle have been installed to the front door trim and
rear door trim to improve convenience. Also, the
bottle holding capability has been improved to
accommodate bottles with shapes that are difficult
to keep upright.
⦆
Door pockets have been installed to the front and
rear door trim panels. The front door pockets have
a large capacity. The rear door pockets which are
also used as bottle holders can also store the
headset for the rear monitor.
⦆
For the armrests, the energy absorbing structure
reduces mid section injuries to passengers in a
collision. Also, the one-piece cloth has an additional
soft layer.
INTERIOR
52A-11
LUGGAGE ROOM
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст