Mitsubishi Outlander XL. Manual — part 1317

｠

The division unit of each part has been enlarged,
also the gap and level difference between the
instrument panel has been minimized.

｠

To the center of the instrument panel, a 1 DIN-sized
center panel box has been adopted to improve
usability. (Vehicles without Premiumaudio)

｠

A light has been added to the large-sized lower
glove box with a key, and card and pen holders have
been installed for improved convenience.

｠

Approximately 40-mm deep, push-open type large-
size instrument panel upper box has been installed
to the upper center of the instrument panel.

｠

At the lower part of center panel, a center lower tray
that can store up to 13 CDs has been installed.
Dropping of stored items in this tray during abrupt
start is prevented.

｠

To improve usability while driving, a built-in cup
holder that can hold a 500-ml plastic bottle as well
as a side box that can store a cigarette box, lighter,

coins, or other small items is installed on the outer
side of the driver's seat.

｠

A ashtray that can be moved to the driver's cup
holder or to the rear armrest has been equipped to
the front part of front floor console.

｠

A console cup holder that can store two 20-oz
plastic bottles or brick packs has been installed in
the rear floor console. To improve the usability, it is
made to store 2 CDs in the upright position or pen-
size long articles horizontally when it is not used as
a cup holder.

｠

A rear floor console with an armrest function can
slide 65 mm forward and backward, and a tissue
box holder has been installed to the underside of
the armrest.

｠

An armrest box that can store a mobile phone,
cards, pens, and other small items has been
installed to the rear floor console, and additionally,
a large rear floor console box that can store 10 CDs
or 6 DVDs has been installed under the rear floor
console.

52A-4

INTERIOR

SEAT

SEAT

FRONT SEAT

M25200000040USA0000010000

ZC6002410000

Seatback pocket

Head restraint

Seatback
frame

Cross frame

<Front/rear collision protection seat
mechanism>

Head restraint adjustment

Reclining adjustment

Height adjustment

Slide adjustment

The front seat offers the following advantages:

｠

The seats are designed to be adjustable in the
reclining and sliding directions.

｠

Head restraints with a vertical adjustment
mechanism have been adopted.

｠

The seat height adjustment function has been
introduced to the driver’s seat. This function raises
and lowers the seat cushion together with the
seatback, thus the driver's waist position in relation
to the seatback is always kept constant, resulting in
the improved riding comfort. By expanding the
height adjustment amount up to (Normal height: 47
mm, Power height: 46 mm), the more optimized
driving position can be adjusted. The pump type
seat height adjustment lever has been adopted for
convenient use.

｠

Some models are equipped with leather seats.
<Option>

｠

Some models have a dual height (front, rear)
adjustment function in the driver’s seat. A motorized
power seat (reclining adjustment, slide adjustment,
dual height adjustment) is available on some
models. <Option>

｠

The driver's seat have seatback pockets for easier
use.

｠

The frontal and rear-end collision protection seat
structure (backward layout of seatback frame and
optimization of head restraint position) has been
adopted to improve safety during a collision at lower
vehicle speed. The cross frame has been installed
below the seat cushion to reduce the forward travel
distance of the passengers during a frontal collision
and has improved safety.

INTERIOR

52A-5

SEAT

SECOND SEAT

M25200000050USA0000010000

ZC601651

Folding lock unlocking lever

0000

Head restraint
adjustment

Reclining
adjustment

Slide
adjustment

Cup holder

: LATCH system anchors
: Tether anchorage positions

Folding structure

The second seats offer the following features.

｠

Reclining adjustment and slide adjustment
mechanisms have been adopted to improve
amenity.

｠

Armrests with a cup holder have been installed to
improve convenience.

｠

Head restraints with height adjustment have been
installed to the outer seats.

｠

The child restraint LATCH system is installed as
standard on the outer seats, and the tether
anchorage on all the seats, improving the versatility
of child seat installation. Also, because the seats
are equipped with the tether anchor, it is now
possible to slide the seat with a child seat installed.

52A-6

INTERIOR

SEAT

THIRD SEAT <7-seater>

M25200000060USA0000010001

ZC600431

<Overview of seat operation
(Folding => Seating)>

Underfloor folding

0000

(1) Pull out the seat back.
(2) Raise the headrest.
(3) Pull out the seat.
*The procedure of Seating => Folding
is the reverse order of the procedures
mentioned above.

<When folding into the underfloor>

①

②

③

Third seat

Third seat offers the following features.

｠

The third seat which can be folded underneath the
floor has been adopted, enabling the use of flat
luggage space.

｠

Urethane-less structure has been adopted for the
cushion, realizing an extremely thin cushion which
can be folded together with seatback and headrest.

MULTI SEAT ARRANGEMENT

M25200000080USA0000010000

This vehicle offers a wide variety of seat
arrangements.

Item
Normal

ZC600243

INTERIOR

52A-7

SEAT