Mitsubishi Outlander XL. Manual — part 1163
ZC5010400034
Harness side: C-103
Test harness
(3)
Measure the voltage between joint connector (CAN1)
terminal 9 and body ground.
OK: 4.7 volts or less
ZC5010400035
Harness side: C-103
Test harness
(4)
Measure the voltage between joint connector (CAN1)
terminal 22 and body ground.
OK: 4.7 volts or less
Q:Do all the voltages measure 4.7 volts or less?
YES(vehicles without MMCS):
Go to Step 20.
YES(vehicles with MMCS):
Go to Step 21.
NO:
Go to Step 30.
STEP 20. Check the wiring harness between joint connector
(CAN1) C-103 and radio and CD player or CD changer
connector C-16 for a short to power supply. Measure the
voltage at joint connector (CAN1) C-103.
A digital multimeter should be used. For details refer to P.
54D-8.
The test wiring harness should be used. For details refer
to P.54D-8.
(1)
Disconnect joint connector (CAN1), and measure the voltage
at the wiring harness side of joint connector (CAN1).
(2)
Turn the ignition switch to the ON position.
ZC5010400036
Harness side: C-103
Test harness
(3)
Measure the voltage between joint connector (CAN1)
terminal 10 and body ground.
OK: 4.7 volts or less
CONTROLLER AREA NETWORK (CAN)
54D-135
DIAGNOSIS
ZC5010400037
Harness side: C-103
Test harness
(4)
Measure the voltage between joint connector (CAN1)
terminal 23 and body ground.
OK: 4.7 volts or less
Q:Do all the voltages measure 4.7 volts or less?
YES(vehicles without satellite radio):
Go to Step 23.
YES(vehicles with satellite radio):
Go to Step 22.
NO:
Go to Step 31.
STEP 21. Check the wiring harness between joint connector
(CAN1) C-103 and CAN box unit connector C-13 for a short
to power supply. Measure the voltage at joint connector
(CAN1) C-103.
A digital multimeter should be used. For details refer to P.
54D-8.
The test wiring harness should be used. For details refer
to P.54D-8.
(1)
Disconnect joint connector (CAN1), and measure the voltage
at the wiring harness side of joint connector (CAN1).
(2)
Turn the ignition switch to the ON position.
ZC5010400036
Harness side: C-103
Test harness
(3)
Measure the voltage between joint connector (CAN1)
terminal 10 and body ground.
OK: 4.7 volts or less
ZC5010400037
Harness side: C-103
Test harness
(4)
Measure the voltage between joint connector (CAN1)
terminal 23 and body ground.
OK: 4.7 volts or less
Q:Do all the voltages measure 4.7 volts or less?
YES(vehicles without satellite radio):
Go to Step 23.
YES(vehicles with satellite radio):
Go to Step 22.
NO:
Go to Step 32.
STEP 22. Check the wiring harness between joint connector
(CAN1) C-103 and satellite radio tuner connector C-111 for
54D-136
CONTROLLER AREA NETWORK (CAN)
DIAGNOSIS
a short to power supply. Measure the voltage at joint
connector (CAN1) C-103.
A digital multimeter should be used. For details refer to P.
54D-8.
The test wiring harness should be used. For details refer
to P.54D-8.
(1)
Disconnect joint connector (CAN1), and measure the voltage
at the wiring harness side of joint connector (CAN1).
(2)
Turn the ignition switch to the ON position.
ZC5010400038
Harness side: C-103
Test
harness
(3)
Measure the voltage between joint connector (CAN1)
terminal 2 and body ground.
OK: 4.7 volts or less
ZC5010400039
Harness side: C-103
Test
harness
(4)
Measure the voltage between joint connector (CAN1)
terminal 13 and body ground.
OK: 4.7 volts or less
Q:Do all the voltages measure 4.7 volts or less?
YES:
Go to Step 23.
NO:
Go to Step 33.
STEP 23. Check the wiring harness between joint connector
(CAN1) C-103 and ETACS-ECU connector C-301 for a short
to power supply. Measure the voltage at joint connector
(CAN1) C-103.
A digital multimeter should be used. For details refer to P.
54D-8.
The test wiring harness should be used. For details refer
to P.54D-8.
(1)
Disconnect joint connector (CAN1) and ETACS-ECU
connector C-301, and measure the voltage at the wiring
harness side of joint connector (CAN1).
(2)
Turn the ignition switch to the ON position.
CONTROLLER AREA NETWORK (CAN)
54D-137
DIAGNOSIS
ZC5010400040
Harness side: C-103
Test
harness
(3)
Measure the voltage between joint connector (CAN1)
terminal 6 and body ground.
OK: 4.7 volts or less
ZC5010400041
Harness side: C-103
Test
harness
(4)
Measure the voltage between joint connector (CAN1)
terminal 19 and body ground.
OK: 4.7 volts or less
Q:Do all the voltages measure 4.7 volts or less?
YES:
Go to Step 34.
NO:
Repair the wiring harness between joint connector
(CAN1) C-103 and ETACS-ECU connector C-301.
STEP 24. Using scan tool MB991958, diagnose the CAN bus
line. (checking the combination meter for internal failure)
Strictly observe the specified wiring harness repair
procedure. For details refer to P.54D-8.
To prevent damage to scan tool MB991958, always turn the
ignition switch to the "LOCK" (OFF) position before
connecting or disconnecting scan tool MB991958.
(1)
Disconnect combination meter connector C-03.
54D-138
CONTROLLER AREA NETWORK (CAN)
DIAGNOSIS
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст