Mitsubishi Outlander XL. Manual — part 1164
ZC501967
AC404789
ZC5019680000
MB991824
MB991827
MB991910
Data link
connector
(2)
Connect scan tool MB991958 to the data link connector.
(3)
Turn the ignition switch to the "ON" position.
ZC5018690002
: Red section on scree n
M. U . T .
J/C (3)
J/C (2)
SAS
4WD
K OS/WC
M
SRS
OCM
A/C
A UDI O
MMCS
Sat Radio
HFM
METER
ABS/ASC
A T
ENGINE
E T A C S
J/C (1)
(4)
Diagnose CAN bus lines, and check if the scan tool
MB991958 screen is as shown in the figure.
OK: The display of the scan tool MB991958 is as
shown in the figure.
Q:Does scan tool MB991958 screen correspond to the
illustration?
YES:
Repair the wiring harness between joint connector
(CAN1) C-103 and combination meter connector C-03.
NO:
Check combination meter connector C-03, and repair
if necessary. If the combination meter connector is in
good condition, replace the combination meter.
STEP 25. Using scan tool MB991958, diagnose the CAN bus
line. (checking the KOS-ECU for internal failure)
Strictly observe the specified wiring harness repair
procedure. For details refer to P.54D-8.
To prevent damage to scan tool MB991958, always turn the
ignition switch to the "LOCK" (OFF) position before
connecting or disconnecting scan tool MB991958.
(1)
Disconnect KOS-ECU connector C-102.
CONTROLLER AREA NETWORK (CAN)
54D-139
DIAGNOSIS
ZC501967
AC404789
ZC5019680000
MB991824
MB991827
MB991910
Data link
connector
(2)
Connect scan tool MB991958 to the data link connector.
(3)
Turn the ignition switch to the "ON" position.
ZC5018690002
: Red section on scree n
M. U . T .
J/C (3)
J/C (2)
SAS
4WD
K OS/WC
M
SRS
OCM
A/C
A UDI O
MMCS
Sat Radio
HFM
METER
ABS/ASC
A T
ENGINE
E T A C S
J/C (1)
(4)
Diagnose CAN bus lines, and check if the scan tool
MB991958 screen is as shown in the figure.
OK: The display of the scan tool MB991958 is as
shown in the figure.
Q:Does scan tool MB991958 screen correspond to the
illustration?
YES:
Repair the wiring harness between joint connector
(CAN1) C-103 and KOS-ECU connector C-102.
NO:
Check KOS-ECU connector C-102, and repair if
necessary. If the KOS-ECU connector is in good condition,
replace the KOS-ECU.
STEP 26. Using scan tool MB991958, diagnose the CAN bus
line. (checking the WCM for internal failure)
Strictly observe the specified wiring harness repair
procedure. For details refer to P.54D-8.
To prevent damage to scan tool MB991958, always turn the
ignition switch to the "LOCK" (OFF) position before
connecting or disconnecting scan tool MB991958.
(1)
Disconnect WCM connector C-29.
54D-140
CONTROLLER AREA NETWORK (CAN)
DIAGNOSIS
ZC501967
AC404789
ZC5019680000
MB991824
MB991827
MB991910
Data link
connector
(2)
Connect scan tool MB991958 to the data link connector.
(3)
Turn the ignition switch to the "ON" position.
ZC5018690002
: Red section on scree n
M. U . T .
J/C (3)
J/C (2)
SAS
4WD
K OS/WC
M
SRS
OCM
A/C
A UDI O
MMCS
Sat Radio
HFM
METER
ABS/ASC
A T
ENGINE
E T A C S
J/C (1)
(4)
Diagnose CAN bus lines, and check if the scan tool
MB991958 screen is as shown in the figure.
OK: The display of the scan tool MB991958 is as
shown in the figure.
Q:Does scan tool MB991958 screen correspond to the
illustration?
YES:
Repair the wiring harness between joint connector
(CAN1) C-103 and WCM connector C-29.
NO:
Check WCM connector C-29, and repair if necessary.
If the WCM connector is in good condition, replace the
WCM.
STEP 27. Using scan tool MB991958, diagnose the CAN bus
line. (checking the SRS-ECU for internal failure)
Strictly observe the specified wiring harness repair
procedure. For details refer to P.54D-8.
To prevent damage to scan tool MB991958, always turn the
ignition switch to the "LOCK" (OFF) position before
connecting or disconnecting scan tool MB991958.
(1)
Disconnect SRS-ECU connector C-28.
CONTROLLER AREA NETWORK (CAN)
54D-141
DIAGNOSIS
ZC501967
AC404789
ZC5019680000
MB991824
MB991827
MB991910
Data link
connector
(2)
Connect scan tool MB991958 to the data link connector.
(3)
Turn the ignition switch to the "ON" position.
ZC5018690002
: Red section on scree n
M. U . T .
J/C (3)
J/C (2)
SAS
4WD
K OS/WC
M
SRS
OCM
A/C
A UDI O
MMCS
Sat Radio
HFM
METER
ABS/ASC
A T
ENGINE
E T A C S
J/C (1)
(4)
Diagnose CAN bus lines, and check if the scan tool
MB991958 screen is as shown in the figure.
OK: The display of the scan tool MB991958 is as
shown in the figure.
Q:Does scan tool MB991958 screen correspond to the
illustration?
YES:
Repair the wiring harness between joint connector
(CAN1) C-103 and SRS-ECU connector C-28.
NO:
Check SRS-ECU connector C-28, and repair if
necessary. If the SRS-ECU connector is in good condition,
replace the SRS-ECU.
STEP 28. Using scan tool MB991958, diagnose the CAN bus
line. (checking the occupant classification-ECU for internal
failure)
Strictly observe the specified wiring harness repair
procedure. For details refer to P.54D-8.
To prevent damage to scan tool MB991958, always turn the
ignition switch to the "LOCK" (OFF) position before
connecting or disconnecting scan tool MB991958.
(1)
Disconnect occupant classification-ECU connector D-31-2.
54D-142
CONTROLLER AREA NETWORK (CAN)
DIAGNOSIS
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст