Mitsubishi Outlander XL. Manual — part 163
ZC6017950000
<Left bank>
MD998772
ZC6017960000
<Right bank>
MD998772
Use special tool MD998772 to compress the valve spring, and
remove the valve spring retainer locks.
ZC6009410000
Installation position
<Right bank>
<Left bank>
Exhaust side
Exhaust side
Intake side
Front
NOTE:
Installation position of special tool is different
between exhaust side and intake side.
INSTALLATION SERVICE POINTS
>>A<< VALVE STEM SEAL INSTALLATION
1.
Apply a small amount of engine oil to the valve stem seal.
ENGINE MECHANICAL
11A-33
CAMSHAFT AND VALVE STEM SEAL
ZC602433
Valve
Valve guide
Valve stem seal
MB992182
0000
Valve spring seat
⦆
Valve stem seals cannot be reused.
⦆
Special tool must be used to install the valve stem seal.
Improper installation could result in oil leaking past the
valve guide.
2.
Use special tool MB992182 to fill a new valve stem seal in the
valve guide using the valve stem area as a guide.
>>B<< VALVE SPRING INSTALLATION
ZC6009830000
Identification
color
Rocker arm side
Install the valve spring with its identification color painted end
facing the locker arm.
>>C<< VALVE SPRING RETAINER LOCK INSTALLATION
ZC6017950000
<Left bank>
MD998772
ZC6017960000
<Right bank>
MD998772
Use special tool MD998772 to compress the valve spring in the
same manner as removal.
11A-34
ENGINE MECHANICAL
CAMSHAFT AND VALVE STEM SEAL
>>D<< ROCKER ARM, SHAFT AND LASH ADJUSTER
ASSEMBLY (EXHAUST SIDE)/ROCKER ARM AND SHAFT
ASSEMBLY (INTAKE SIDE) INSTALLATION
1.
Install the rocker arm, shaft and lash adjuster assembly
(exhaust side) and rocker arm and shaft assembly (intake
side).
2.
Tighten the mounting bolts to the specified torque.
Tightening torque:
<Intake side> 31 ± 3 N·m (23 ± 2 ft-lb)
<Exhaust side> 13 ± 1 N·m (115 ± 9 in-lb)
ZC6019040000
MD998443
3.
Remove special tool MD998443.
ZC6005880000
<Right bank>
<Left bank>
Notch
Notch
Notch
Notch
Front
4.
Check that notches in the each rocker shaft are facing the
direction shown in the illustration.
ENGINE MECHANICAL
11A-35
CAMSHAFT AND VALVE STEM SEAL
>>E<< ROCKER COVER INSTALLATION
ZC6003090000
Right bank
Left bank
1
2
3
4
5
6
1
2
3
4
5
6
Tighten the bolts in order of the numbers shown in the
illustration.
>>F<< CAMSHAFT OIL SEAL INSTALLATION
1.
Apply engine oil to the camshaft oil seal lip.
ZC6025770000
<Right bank>
MD998713
Oil seal
Camshaft
ZC6025760000
MD998713
MD998777
Camshaft
Oil seal
<Left bank>
2.
Use special tools MD998713 and MD998777 to press-fit the
camshaft oil seal.
>>G<< CAMSHAFT SPROCKET INSTALLATION
ZC6006010000
MB990767
MD998719
1.
Use special tools MB990767 and MD998719 in the same way
as during removal to install the camshaft sprocket.
2.
Tighten the camshaft sprocket mounting bolt to the specified
torque.
Tightening torque: 90 ± 10 N·m (67 ± 7 ft-lb)
11A-36
ENGINE MECHANICAL
CAMSHAFT AND VALVE STEM SEAL
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст