Mitsubishi Outlander XL. Manual — part 858
or damaged terminals, or terminals pushed back in the
connector.
Q:Is the door mirror (RH) connector E-01 and rear window
defogger relay connector C-309 in good condition?
YES:
Go to Step 3.
NO:
Repair or replace the damaged component(s). Refer to
GROUP 00E, Harness Connector Inspection P.00E-2. Check if
the door mirrors works normally.
STEP 3. Check the wiring harness between the door mirror
(RH) connector E-01 (terminal 2) and rear window defogger
relay connector C-309 (terminal 3).
NOTE:
Also check intermediate connector C-113 for loose,
corroded or damaged terminals, or terminals pushed back in
the connector. If intermediate connector C-113 is damaged,
repair or replace the damaged component(s) as described in
GROUP 00E, Harness Connector Inspection P.00E-2.
Q:Is the wiring harness between door mirror (RH) connector
E-01 (terminal 2) and rear window defogger relay
connector C-309 (terminal 3) in good condition?
YES:
Go to step 4.
NO:
Repair the wiring harness as necessary. Check if all
heated door mirrors work normally.
STEP 4. Check door mirror (LH) connector E-15.
Q:Is the door mirror (LH) connector E-15 in good condition?
YES:
Go to Step 5.
NO:
Repair or replace the damaged component(s). Check if
all heated door mirrors work normally.
STEP 5. Check the wiring harness between door mirror (LH)
connector E-15 (terminal 2) and rear window defogger relay
connector C-309 (terminal 3).
NOTE:
Also check intermediate connector C-127 for loose,
corroded or damaged terminals, or terminals pushed back in
the connector. If intermediate connector C-127 is damaged,
repair or replace the damaged component(s) as described in
GROUP 00E, Harness Connector Inspection P.00E-2.
Q:Is the wiring harness between door mirror (RH) connector
E-15 (terminal 2) and rear window defogger relay
connector C-309 (terminal 3) in good condition?
YES:
The procedure is complete.
NO:
Repair the wiring harness as necessary. Check if the
all heated door mirrors work normally.
OUTSIDE MIRROR
51C-5
DIAGNOSIS
INSPECTION PROCEDURE 2: Left or right heated door mirror does not operate
M15102200013USA0000010001
REAR WINDOW
DEFOGGER
RELAY
RELAY
BOX
C-126
C-113
C-127
C-112
DOOR MIRROR
ASSEMBLY (LH)
2
1
1
2
DOOR MIRROR
ASSEMBLY (RH)
BLA
CK-
WHITE
BLA
CK
BLA
CK
BLA
CK
BLA
CK
BLA
CK-
WHITE
BLA
CK-
WHITE
BR
O
WN
BLA
CK-
WHITE
Heated Door Mirror Circuit
ZC6022550000
ZC6008760024
Connector: C-112
ZC600876
Connector: C-113
0020
C-113 (BR)
51C-6
OUTSIDE MIRROR
DIAGNOSIS
ZC600875
Connector: C-126
0021
ZC6008750014
Connector: C-127
C-127 (BR)
ZC600878
Connector: C-309
C-309 (B)
0009
ZC6008810006
Connector: E-01
ZC6008810007
Connector: E-15
CIRCUIT OPERATION
If either of the heated door mirror do not operate
normally, it may be due to malfunctions in the heated
door mirror circuit or door mirror.
TROUBLESHOOTING HINTS
⦆
Malfunction of the heated door mirror circuit
⦆
Malfunction of the door mirror
⦆
The wiring harness or connectors may have loose,
corroded or damaged terminals, or terminals
pushed back in the connector.
DIAGNOSIS
Required Special Tools:
⦆
MB991223: Test Harness Set
OUTSIDE MIRROR
51C-7
DIAGNOSIS
STEP 1. Verify the operation of each heated door mirror.
Q:Which door mirror does not heat?
Door mirror (LH):
Go to Step 2.
Door mirror (RH):
Go to Step 8.
STEP 2. Check door mirror (LH) connector E-15 for loose,
corroded or damaged terminals, or terminals pushed back
in the connector.
Q:Is door mirror (LH) connector E-15 in good condition?
YES:
Go to Step 3.
NO:
Repair or replace the damaged component(s). Refer to
GROUP 00E, Harness Connector Inspection P.00E-2. And then
check to see that the heater function of the door mirror
(LH) operates normally.
STEP 3. Check the heater of the door mirror (LH).
When relocating the car between locations of extremely
different temperatures (warm and cold), leave the car in a
location for a while to adapt to the temperature prior to
checking it.
ZC6003790000
Check to see that the resistance between terminal 1 and 2 of the
door mirror (LH) connector E-15.
⦆
The resistance should be 7.2 ± 1.4 Ω at 25°C (77°F).
Q:Is the resistance normal?
YES:
Go to Step 4.
NO:
Replace the door mirror (LH). And then check to see
that the heater function of the door mirror (LH) is
operating normally.
STEP 4. Check the ground circuit between door mirror (LH)
connector E-15 and ground for open circuit. Measure the
resistance at door mirror (LH) connector E-15.
(1)
Disconnect door mirror (LH) connector E-15 and check at the
wiring harness side connector.
ZC5007880019
Harness side: E-15
(2)
Measure the resistance value between terminal 1 and
ground.
⦆
The resistance should be 2Ω or less.
Q:Is the measured resistance 2Ω or less?
YES:
Go to Step 6.
NO:
Go to Step 5.
STEP 5. Check the wiring harness between door mirror (LH)
connector E-15 (terminal 1) and ground.
NOTE:
Also check intermediate connector C-126 and C-127 for
loose, corroded or damaged terminals, or terminals pushed
back in the connector. If intermediate connector C-126 and
51C-8
OUTSIDE MIRROR
DIAGNOSIS
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст