Mitsubishi Outlander XL. Manual — part 611
ZC501967
AC404789
ZC5019680000
MB991824
MB991827
MB991910
Data link
connector
To prevent damage to scan tool MB991958, always turn the
ignition switch to the "LOCK" (OFF) position before
connecting or disconnecting scan tool MB991958.
1.
Ensure that the ignition switch is at the "LOCK" (OFF) position.
2.
Start up the personal computer.
3.
Connect special tool MB991827 to special tool MB991824 and
the personal computer.
4.
Connect special tool MB991910 to the special tool MB991824.
5.
Connect special tool MB991910 to the data link connector.
6.
Turn the power switch special tool MB991824 to the "ON"
position.
NOTE:
When the special tool MB991824 is energized, the
special tool MB991824 indicator light will be illuminated
in a green color.
7.
Start the M.U.T.-III system on the personal computer.
NOTE:
Disconnect the scan tool MB991958 in the reverse
order of the connecting sequence, making sure that the
ignition switch is at the "LOCK" (OFF) position.
HOW TO READ AND ERASE DIAGNOSTIC
TROUBLE CODES
Required Special Tools:
⦆
MB991958: Scan Tool (M.U.T.-III Sub Assembly)
⦆
MB991824: Vehicle Communication Interface (V.C.I.)
⦆
MB991827: M.U.T.-III USB Cable
⦆
MB991910: M.U.T.-III Main Harness A
ZC501967
AC404789
ZC5019680000
MB991824
MB991827
MB991910
Data link
connector
To prevent damage to scan tool MB991958, always turn the
ignition switch to the "LOCK" (OFF) position before
connecting or disconnecting scan tool MB991958.
NOTE:
If the battery voltage is low, diagnostic trouble
codes will not be set. Check the battery if scan tool
MB991958 does not display.
1.
Connect scan tool MB991958 to the data link connector.
2.
Turn the ignition switch to the "ON" position.
3.
Select "System Select."
4.
Select "ABS/ASC/ASTC" from the system list, and select the
"OK" button.
5.
Select "Diagnostic Trouble Code."
6.
If a DTC is set, it is shown.
7.
Choose "DTC erase" to erase the DTC.
ANTI-LOCK BRAKING SYSTEM (ABS)
35B-7
ANTI-LOCK BRAKING SYSTEM (ABS) DIAGNOSIS
HOW TO READ DATA LIST
Required Special Tools:
⦆
MB991958: Scan Tool (M.U.T.-III Sub Assembly)
⦆
MB991824: Vehicle Communication Interface (V.C.I.)
⦆
MB991827: M.U.T.-III USB Cable
⦆
MB991910: M.U.T.-III Main Harness A
ZC501967
AC404789
ZC5019680000
MB991824
MB991827
MB991910
Data link
connector
To prevent damage to scan tool MB991958, always turn the
ignition switch to the "LOCK" (OFF) position before
connecting or disconnecting scan tool MB991958.
1.
Connect scan tool MB991958 to the data link connector.
2.
Turn the ignition switch to the "ON" position.
3.
Select "System Select."
4.
Select "ABS/ASC/ASTC" from the system list, and select the
"OK" button.
5.
Select "Data List."
HOW TO PERFORM ACTUATOR TEST
Required Special Tools:
⦆
MB991958: Scan Tool (M.U.T.-III Sub Assembly)
⦆
MB991824: Vehicle Communication Interface (V.C.I.)
⦆
MB991827: M.U.T.-III USB Cable
⦆
MB991910: M.U.T.-III Main Harness A
35B-8
ANTI-LOCK BRAKING SYSTEM (ABS)
ANTI-LOCK BRAKING SYSTEM (ABS) DIAGNOSIS
ZC501967
AC404789
ZC5019680000
MB991824
MB991827
MB991910
Data link
connector
To prevent damage to scan tool MB991958, always turn the
ignition switch to the "LOCK" (OFF) position before
connecting or disconnecting scan tool MB991958.
1.
Connect scan tool MB991958 to the data link connector.
2.
Turn the ignition switch to the "ON" position.
3.
Select "System Select."
4.
Select "ABS/ASC/ASTC" from the system list, and select the
"OK" button.
5.
Choose "Actuator Test" from "ABS" screen.
6.
Choose an appropriate item and select the "OK" button.
DIAGNOSTIC TROUBLE CODE CHART
M13502000113USA0000010000
During diagnosis, a DTC code associated with
other systems may be set when the ignition switch
is turned on with connector(s) disconnected. On
completion, confirm all systems for DTCs. If DTC
code(s) are set, erase them all.
DTC
Inspection item
Reference page
C100A
Abnormality in FL wheel speed sensor circuit
C1015
Abnormality in FR wheel speed sensor circuit
C1020
Abnormality in RL wheel speed sensor circuit
C102B
Abnormality in RR wheel speed sensor circuit
C1011
Abnormality in FL wheel speed sensor signal
C101C
Abnormality in FR wheel speed sensor signal
C1027
Abnormality in RL wheel speed sensor signal
C1032
Abnormality in RR wheel speed sensor signal
C1014
Mutual monitoring of FL wheel speed sensor
C101F
Mutual monitoring of FR wheel speed sensor
C102A
Mutual monitoring of RL wheel speed sensor
C1035
Mutual monitoring of RR wheel speed sensor
C1041
Abnormality in periodical signal for FL wheel speed sensor
C1042
Abnormality in periodical signal for FR wheel speed sensor
C1043
Abnormality in periodical signal for RL wheel speed sensor
C1044
Abnormality in periodical signal for RR wheel speed sensor
C1046
FL wheel speed sensor control phase time exceeded
C1047
FR wheel speed sensor control phase time exceeded
ANTI-LOCK BRAKING SYSTEM (ABS)
35B-9
ANTI-LOCK BRAKING SYSTEM (ABS) DIAGNOSIS
DTC
Inspection item
Reference page
C1048
RL wheel speed sensor control phase time exceeded
C1049
RR wheel speed sensor control phase time exceeded
C104B
Abnormality in FL wheel inlet valve system
C104F
Abnormality in FR wheel inlet valve system
C1053
Abnormality in RL wheel inlet valve system
C1057
Abnormality in RR wheel inlet valve system
C105F
Abnormality in FL wheel outlet valve system
C1063
Abnormality in FR wheel outlet valve system
C1067
Abnormality in RL wheel outlet valve system
C105B
Abnormality in RR wheel outlet valve system
C2104
Malfunction of valve power supply circuit
C1073
Malfunction of motor drive circuit
C2116
Abnormality in pump motor power supply voltage
C1000
Abnormality in stoplight switch circuit
C2200
Trouble in ASC-ECU
C2100
Abnormality in battery voltage
(low voltage)
9.7 ± 0.3 V or less*1
8.0 ± 0.5 V or less*1
C2101
Abnormality in battery voltage
(high voltage)
18.0 ± 1.0 V or more
C1395
Brake fluid filling not complete
C2203
VIN not recorded
C1210*2
Defective G sensor
Abnormality in output voltage
C1242*2
Defective G sensor
Abnormality in output voltage
C2111*2
Sensor power supply circuit/Low input
C2112*2
Sensor power supply circuit/High input
C1608
Implausible diagnosis data
U0001
Bus off
U0100
Engine time-out error
U0114*2
AWD-ECU time-out error
U0141
ETACS time-out error
U1415
Variant coding not implemented
U1417
Invalid variant coding value (including wrong assembly)
NOTE:
⦆
*1: This diagnostic trouble code is not set within the
vehicle speed of 20 km/h or less.
⦆
*2: Vehicles for AWD.
35B-10
ANTI-LOCK BRAKING SYSTEM (ABS)
ANTI-LOCK BRAKING SYSTEM (ABS) DIAGNOSIS
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст