Mitsubishi Outlander XL. Manual — part 518
TOOL
TOOL NUMBER AND
NAME
SUPERSESSION
APPLICATION
MB992195
Spring compressor
-
Removal and installation
of low and reverse brake
snap ring
MB992196
Spring compressor
-
Removal and installation
of 2-6 brake piston snap
ring
MB992197
Oil seal installer
-
Installation of differential
side oil seal
MB992198
Oil seal installer
-
Installation of converter
housing oil seal
MB992075
Handle
-
Use with oil seal installer
MB992142
Oil seal installer
-
Installation of transfer oil
seal <W6AJ>
MB990936
Oil seal installer
-
Installation of transfer oil
seal <W6AJ>
MB990801
Rear axle bearing puller
-
Remove of tapered roller
bearing
AUTOMATIC TRANSAXLE OVERHAUL
23B-7
SPECCIAL TOOLS
TOOL
TOOL NUMBER AND
NAME
SUPERSESSION
APPLICATION
YB990811AA00
MB990811
Side bearing puller cap
-
Use with rear axle bearing
puller
MB990956
Needle bearing installer
-
Use with rear axle bearing
puller
YB990810AA00
MB990810
Side bearing puller
-
Remove of tapered roller
bearing
MD999566
Claw
-
Use with side bearing
puller
MD998761
Cam oil seal installer
-
Use with side bearing
puller
MD998826
Installer adapter
-
Installation of tapered
roller bearing <F6AJ>
YB991559AA00
MB991559
Cam oil seal installer
adapter
-
Installation of tapered
roller bearing <F6AJ>
MB992213
Bearing installer
-
Installation of tapered
roller bearing
23B-8
AUTOMATIC TRANSAXLE OVERHAUL
SPECCIAL TOOLS
TOOL
TOOL NUMBER AND
NAME
SUPERSESSION
APPLICATION
MB992150
Oil seal installer
-
Installation of tapered
roller bearing
TRANSAXLE
DISASSEMBLY AND ASSEMBLY
M12303000010USA0000010000
⦆
Use a fluid of the designated brand for ATF
(automatic transmission fluid). Use of ATF not
specified by the manufacturer can affect
drivability and the durability of the automatic
transmission, and can even lead to damage to
the transmission.
⦆
Perform disassembly work in a clean, dustproof
room.
⦆
Wash sand and mud adhering to the outside of
the transaxle well using steam or washing oil
outside a dustproof room before disassembly to
prevent them from entering the inside during
disassembly and assembly. (Do not blow steam
in the inside of the transaxle or wash rubber-
made parts with washing oil.)
⦆
Pull out the torque converter from the transaxle
after it is cleaned and drain ATF.
⦆
During the disassembly and assembly work,
always use bare hands or vinyl gloves.
⦆
Do not touch internal parts with your hands
which touched the outside of the transaxle.
(Wash your hands before touching internal
parts.)
⦆
Use paper towels instead of cotton gloves and
shop towels to prevent entry of lint.
⦆
Check the normal condition before performing
disassembly and assembly work.
⦆
Do not reuse drained ATF.
⦆
Refer to "GENERAL DESCRIPTION" for the
meanings of the symbols used in the
illustration.
AUTOMATIC TRANSAXLE OVERHAUL
23B-9
TRANSAXLE
ZK603044
1
2
3
4
5
6
7
8
9
10
11
12
13
23 ± 3 N·m
17 ± 2 ft-lb
11 ± 1 N·m
97 ± 9 in-lb
23 ± 3 N·m
17 ± 2 ft-lb
90 ± 10 N·m
66 ± 7 ft-lb
23 ± 3 N·m
17 ± 2 ft-lb
23 ± 3 N·m
17 ± 2 ft-lb
22 ± 3 N·m
16 ± 2 ft-lb
23 ± 3 N·m
17 ± 2 ft-lb
90 ± 10 N·m
66 ± 7 ft-lb
AA00
<F6AJ>
Apply automatic
transmission fluid
to all moving parts
before installation.
1.
FR roll stopper bracket
2.
RR roll stopper bracket
3.
Corrugate clamp bracket
4.
O-ring
5.
Oil filler tube
6.
Oil level gauge
7.
Corrugate clamp bracket
8.
Spring washer
9.
Manual control lever
10. Harness bracket
11. Control cable bracket
12. Corrugate clamp bracket
13. Breather hose
23B-10
AUTOMATIC TRANSAXLE OVERHAUL
TRANSAXLE
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст