Mitsubishi Outlander XL. Manual — part 1309
Adjustment
item (scan tool
MB991958
display)
Adjustment item
Adjusting
contents
(scan tool MB991958
display)
Adjusting contents
Horn chirp by
RKE
Horn chirp by RKE
Not sound horn
No horn answerback function
Lock any time
The horn sounds when the lock button of
keyless entry transmitter is pressed once.
W lock any time
The horn sounds when the lock button of
keyless entry transmitter is pressed twice.
(default)
Tone
alarm
answer back
Adjusts the tone
alarm answer back
function.
Not sound tone alarm
No function
At keyless key
Sounds when the keyless entry system is
activated.
At keyless
Sounds when KOS is activated (default).
At Both
Sounds when the keyless entry system or
KOS is activated.
Timer lock timer Timer lock period
adjustment
30sec
30 seconds (default)
60sec
60 seconds
120sec
120 seconds
180sec
180 seconds
Duration
pre-
alarm
Adjustment of pre-
alarm continue time
10 sec
10 seconds (default)
6 sec
6 seconds
Alarm
With/without theft-
alarm function
Disable
No function
Enable
With function (default)
Panic
alarm
switch
With/without panic
alarm function
Disable
No function
Enable
With function (default)
KOS auto lock
With/without KOS
auto lock function
Enable
No function (default)
Disable
With function
Fob out of car
With/without KOS
key
exterior
detection function
Enable
No function
Disable
With function (default)
KOS feature
KOS
function
adjustment
Both enable
All KOS functions are enabled (default).
DoorEntry enable
Only door entry function is enabled.
ENG strt enable
Only engine starting function is enabled.
Both disabled
All KOS functions are disabled.
KOS
unlock
disable time
Adjusts the door
unlock
inhibition
period after door
lock is activated.
0sec
0 seconds
3sec
3 seconds (default)
5sec
5 seconds
42B-30
KEYLESS OPERATION SYSTEM (KOS)
CONFIGURATION FUNCTION
GROUP 42C
WIRELESS CONTROL MODULE
(WCM)
CONTENTS
GENERAL INFORMATION. . .
SYSTEM OPERATION. . . ...
KEYLESS ENTRY FUNCTION. . .
IMMOBILIZER FUNCTION. . ...
TIRE PRESSURE MONITORING SYSTEM
(TPMS) FUNCTION. . . ...
WARNINGS. . . . . ..
CONFIGURATION FUNCTION. ....
42C-1
GENERAL INFORMATION
M24200200001USA0000010000
The wireless control module (WCM) is a system that
integrates the keyless entry function, immobilizer
function, and the TPMS function, and it has the
following features:
⦆
The ignition key (transmitter) incorporates a lock/
unlock switch and a panic alarm switch, and can be
operated by remote control. The ignition key also
incorporates an indicator light that enables the
driver to check if the signal is transmitted correctly
or if the battery in the key is discharged. (Refer
to P.42C-5.)
⦆
The ignition key incorporates the immobilizer
function that inhibits starting the engine by using an
unauthorized key.
⦆
The incorporated TPMS function monitors the air
pressure of all the tires.
⦆
Each vehicle is provided with two ignition keys
(transmitter), and up to eight ignition keys can be
registered.
⦆
Settings of the keyless entry function can be
adjusted using a customization function.
CONSTRUCTION DIAGRAM
PANI
C
ZC6009620000
ETACS-ECU
WCM
Lock switch
Unlock switch
Ignition key
(Transmitter)
Engine control module
Indicator light
TPMS transmitter
(Tire pressure sensor)
TPMS transmitter
(Tire pressure sensor)
L O W
TIRE PRESSURE
Multi information display
(Built in combination meter)
TPMS
warning light
ABS or ASC-ECU
42C-2
WIRELESS CONTROL MODULE (WCM)
GENERAL INFORMATION
Main components and functions
Parts name
Functional description
WCM
Controls the keyless entry functions, TPMS functions and starting of the engine
by using the following communications.
⦆
Communications with ETACS-ECU, ECK, ABS or ASC-ECU and combination
meter via CAN
⦆
Wireless communication with the ignition key (transmitter)
⦆
Wireless communication with the TPMS transmitter
Ignition key (transmitter)
The ignition key (transmitter) receives signals sent from WCM, certifies the
transponder ID code, calculates the encrypted code, and sends the reply data
signal to WCM. The ignition key (transmitter) also sends signals to WCM when
the lock/unlock switches on it are operated. Warning symbol and message is
additionally displayed on the Multi information display.
Combination meter (Multi
information display, TPMS
warning light)
Communicates with WCM via CAN. Send ignition switch status. Receives the
warning request or warning information from WCM, activates*the TPMS warning
iight.
ETACS-ECU
Communicates with WCM via CAN. Receives the door lock/unlock request from
WCM, outputs the lock/unlock signal and flashes the turn signal light to inform
the driver that the doors are locked/unlocked.
ABS or ASC-ECU
Communicates with WCM via CAN. Sends the vehicle speed data.
ECM
Communication with WCM via CAN. Send atmospheric pressure data.
TPMS transmitter
Measure tire pressure directly, then send radio frequency signal to WCM.
NOTE:
*:
⦆
Illuminates for tire pressure warning.
⦆
Flashes for about 1 minute and then continuously
illuminated for TPMS malfunction warning.
WIRELESS CONTROL MODULE (WCM)
42C-3
GENERAL INFORMATION
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст