Mitsubishi Outlander XL. Manual — part 15
ZB600072 0000
A
B
B
A
REPAIR WELDS
270 mm
(10.6 in)
150 mm
(5.9 in)
310 mm
(12.2 in)
230 mm
(9.0 in)
NOTE:
⦆
Refer to the Front End Crossmember section on P.
3-3for the welding point with front end
crossmember.
⦆
Refer to the Fender Shield section on P.3-4for the
welding points with the fender shield.
WELDED PANEL REPLACEMENT
3-9
FRONT PILLAR
FRONT PILLAR
M40300000050USA0000010000
ZB6001460000
( )
Symbol
Operation description
Spot welding
MIG plug welding
indicates two panels to be welded
indicates three panels to be welded
MIG spot welding
MIG arc welding (continuous)
Braze welding
Anti-corrosion agent applications locations
(Use access holes to apply liberally to butt-welded joints.)
3-10
WELDED PANEL REPLACEMENT
FRONT PILLAR
ZB600073
A
C
B
0000
B
D
E
REPAIR WELDS
Acoustic foam
(With the side outer panel removed)
210 mm
(8.3 in)
120 mm
(4.7 in)
(With the front upper frame outer removed)
A
C
D
E
NOTE:
For the welding points of upper frame outer
and upper pillar-to-front pillar brace, refer
to P.3-4Fender Shield.
When repairing the area using foam materials do
not use firing tools since the foaming materials
may burn.
WELDED PANEL REPLACEMENT
3-11
FRONT PILLAR
NOTE ON REPAIR WORK
REMOVAL
ZB600021
350 mm
(13.7 in)
0000
side outer panel
Side sill outer reinforcement front
Side sill inner
support front
Because partial replacement of the side sill outer reinforcement
front is impossible, remove the side sill outer reinforcement front
on the body side. Cut and remove the side outer panel at 350
mm (13.7 inches) behind the side sill cutting section.
INSTALLATION
ZB6001350000
Side sill outer
reinforcement
front
Front pillar
reinforcement
lower
1.
When installing the side sill outer reinforcement front and front
pillar reinforcement lower, weld them in advance as shown in
the figure.
3-12
WELDED PANEL REPLACEMENT
FRONT PILLAR
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст