Mitsubishi Outlander XL. Manual — part 1076
AC506889
ZC600410 0000
Lock pin
2.
With using a cross-headed screw driver (small) or similar
items to press in the lock pin, remove the ignition key, and then
remove the steering lock cylinder.
INSPECTION
INSPECTION
M15410000013USA0000010000
IGNITION SWITCH CONTINUITY CHECK
AC506506
ZC600407 0000
Column switch
With the ignition switch mounted to the vehicle, disconnect and
check the ignition switch connection connector.
Ignition key position Terminal
number
Normal
conditio
ns
LOCK
1 - 2, 1 - 4, 1 - 5,
1 - 6
No
continuit
y
ACC
1 - 6
Continuit
y exists
(2 Ω or
less)
ON
1 - 2 - 4 - 6
Continuit
y exists
(2 Ω or
less)
START
1 - 2 - 5
Continuit
y exists
(2 Ω or
less)
IGNITION SWITCH
54Ag-15
INSPECTION
KEY REMINDER SWITCH CONTINUITY CHECK
AC506506
ZC600407 0001
Column switch
With the key reminder switch mounted to the vehicle, disconnect
the key reminder switch connection connector, and then perform
the continuity check.
Key status
Terminal
number
Normal
condition
s
Key removed
2 - 3
Continuity
exists (2
Ω or less)
Key inserted
2 - 3
No
continuity
54Ag-16
IGNITION SWITCH
INSPECTION
GROUP 54Ah
COLUMN SWITCH
CONTENTS
GENERAL INFORMATION. . ...
SPECIAL TOOLS. . . . .
DIAGNOSIS. . . . . .
STANDARD FLOW OF DIAGNOSTIC
TROUBLESHOOTING. . . ...
DIAGNOSTIC FUNCTION. . ...
DIAGNOSTIC TROUBLE CODE TABLE
. . . . . . . ..
DIAGNOSTIC TROUBLE CODE PROCEDURES
. . . . . . . .
DTC B2350: Malfunction of lighting
switch, DTC B2351: Malfunction of
wiper/washer switch. . . .
REMOVAL AND INSTALLATION. ..
INSPECTION. . . . ....
WIPER/WASHER SWITCH CONTINUITY CHECK
. . . . . . . ..
COLUMN SWITCH (SWITCH BODY)
CONTINUITY CHECK. . . ..
54Ah-1
GENERAL INFORMATION
M15410200001USA0000010000
The column switch has a built in feature to ensure the
driver's safety during frontal collision of vehicle.
Function
ZC5019540000
Front of vehicle
Collision load
Collision load
Column switch
Column switch
If the column switch is moved toward the front of the
vehicle and hit on the instrument panel or meter bezel
during a frontal collision, the steering wheel is moved
to the front of the vehicle because the right and left
levers fall down, ensuring the driver's safety. In
addition, the column switch secures the rigidity that
the levers do not fall down by the normal operation.
The column switch cannot be reused after the
deformation.
54Ah-2
COLUMN SWITCH
GENERAL INFORMATION
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст