Mitsubishi Outlander XL. Manual — part 1255
MEMO
13B-6
FUEL SUPPLY
GROUP 14
ENGINE COOLING
CONTENTS
GENERAL INFORMATION. . . .
WATER PASSAGE. . . . ...
WATER PUMP. . . . . ..
14-1
![](/vehicles/winoney/olyerd/ierigig/sint.png)
GENERAL INFORMATION
M21400000001USA0000010000
The cooling system is a water-cooled pressurized,
forced circulation type which offers the following
features.
⦆
To stabilize engine coolant temperature, the
thermostat is located at the coolant inlet port from
the radiator.
⦆
To improve engine cooling performance and save
weight, a plastic tank and aluminum radiator fins are
used.
⦆
Vehicles for California emission regulation:
PremAir®* direct ozone reduction (DOR) radiator
has been adopted to protect the environment. A
catalyst which reduces ozone (O3) in the ambient
air has been applied to the radiator core.
NOTE:
*: PremAir is a registered trademark of
Engelhard Corporation.
SPECIFICATIONS
Item
Specification
Cooling method
Water-cooled pressurized, forced
circulation with electrical fan
Radiator
Type
Pressurized corrugate type
Performance kJ/h (kcal/h)
266,400 (63,640)
260,280 (62,178)*
Water pump
Type
Centrifugal impeller
Drive method
Timing belt
Thermostat
Type
Wax pellet with jiggle valve
Valve open temperature °C (°F)
82 (180)
NOTE:
*: Vehicles for California emission
regulation.
CONSTRUCTION DIAGRAM
ZC6004250000
Radiator assembly
Condenser fan motor
Radiator upper hose
assembly
Radiator lower hose
Transmission oil
cooler line hose
and tube assembly
Radiator fan motor
Radiator condenser
tank assembly
Cooling fan shroud
14-2
ENGINE COOLING
GENERAL INFORMATION
![](/vehicles/winoney/olyerd/ierigig/end.png)
WATER PASSAGE
M21400000040USA0000010000
ZK602607
Radiator
Thermostat
Water pipe
Water pump
EGR valve
Throttle body
Cylinder block
right bank
Cylinder block
left bank
Cylinder head
right bank
Cylinder head
left bank
Heater
Thermostat
housing
AA00
WATER PUMP
M21400000030USA0000010000
ZK602608
Impeller
AA00
The water pump is installed in the front of the cylinder block and
driven by the timing belt.
Item
Specifications
Discharge volume L/min
70/3000 140/6000
Impeller diameter mm
64
Pulley outer diameter mm
61.7
ENGINE COOLING
14-3
WATER PASSAGE
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст