Mitsubishi Montero (2004+). Manual — part 403
AUTO-CRUISE CONTROL
TSB Revision
ENGINE AND EMISSION CONTROL
17-19
STEP 5. Using scan tool MB991958, check data list item 02:
Set Switch, item 03: Resume Switch.
CAUTION
To prevent damage to scan tool MB991958, always turn the
ignition switch to the "LOCK" (OFF) position before con-
necting or disconnecting scan tool MB991958.
(1) Connect scan tool MB991958 to the data link connector.
(2) Turn the ignition switch to the "ON" position.
(3) Set scan tool MB991958 to data reading mode.
Item 02 auto-cruise control system, Set Switch.
• When "SET" switch is at the ON position, the display
on scan tool MB991958 should be "ON."
• When "SET" switch is at the OFF position, the dis-
play on scan tool MB991958 should be "OFF."
(4) Set scan tool MB991958 to data reading mode for
auto-cruise control system item 03, Resume Switch.
• When "RESUME" switch is at the ON position, the dis-
play on scan tool MB991958 should be "ON."
• When "RESUME" switch is at the OFF position, the dis-
play on scan tool MB991958 should be "OFF."
(5) Turn the ignition switch to the "LOCK" (OFF) position.
Q: Is the switch operating properly?
YES : It can be assumed that this malfunction is intermittent.
Refer to GROUP 00, How to Use
Troubleshooting/Inspection Service Points
− How to
Cope with Intermittent Malfunction
.
NO : Replace the PCM. Refer to
, Auto-cruise
Control.
AC306409AF
MB991911
MB991824
MB991827
AUTO-CRUISE CONTROL
TSB Revision
ENGINE AND EMISSION CONTROL
17-20
STEP 6. Check auto-cruise control switch connector
D-227, intermediate connector D-230, clock spring
connector D-226, clock spring connector D-205,
intermediate connector E-110 and PCM connector D-135
for looser, corroded or damaged terminals, or terminals
pushed back in the connector.
1 2 3
5
4
6
AC205037
2
1
3
CONNECTORS: D-205, D-226, D-227, D-230
D-227
D-226
D-205(B)
D-227
D-226
D-205
D-230(B)
D-230
AB
AC205045
6
1
7
2
9
8
10
3
5
12
11
4
1314
E-110
CONNECTOR: E-110
AB
AUTO-CRUISE CONTROL
TSB Revision
ENGINE AND EMISSION CONTROL
17-21
Q: Are the connectors and terminals in good condition?
YES : Go to Step 7.
NO : Repair or replace the damaged components. Refer to
GROUP 00E, Harness Connector Inspection
STEP 7. Check the clock spring.
Refer to GROUP 52B, Air Bag Modules and Clock Spring
.
Q: Is the clock spring operating properly?
YES : Go to Step 8.
NO : Replace the clock spring. Refer to GROUP 52B, Air
Bag Modules and Clock Spring
.
AC205039
CONNECTOR: D-135
D-135(GR)
PCM
AB
AUTO-CRUISE CONTROL
TSB Revision
ENGINE AND EMISSION CONTROL
17-22
STEP 8. Check the harness for damage between
auto-cruise control switch connector D-227 terminal 2 and
PCM connector D-135 terminal 94.
Q: Is the harness wire in good condition?
YES : Go to Step 9.
NO : Repair or replace the harness wire.
AC205038AB
D-227
CONNECTOR: D-227
AC205039
CONNECTOR: D-135
D-135(GR)
PCM
AB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст