Mitsubishi Montero (2004+). Manual — part 714
SYMPTOM PROCEDURES
TSB Revision
SIMPLIFIED WIRING SYSTEM (SWS)
54B-113
STEP 8. Check the front passenger's door lock actuator.
1. Remove the passenger’s door lock actuator, and check it.
Refer to GROUP 42
− Door Handle and Latch
2. Follow the table below to check the passenger's door lock
actuator for correct operation.
Q: Does the front passenger's door lock actuator work
normally?
YES : Go to Step 9.
NO : Replace the front passenger’s door lock actuator.
Verify that all the doors can be locked and unlocked
normally.
STEP 9. Check ETACS-ECU connector D-222 for loose,
corroded or damaged terminals, or terminals pushed back
in the connector.
Q: Is ETACS-ECU connector D-222 in good condition?
YES : Go to Step 10.
NO : Repair or replace the damaged component(s). Refer
to GROUP 00E, Harness Connector Inspection
. After repairs have been made, verify that all
the doors can now be locked and unlocked normally.
LEVER
POSITION
BATTERY
CONNECTION
LEVER
OPERATION
At the
"LOCK"
position
• Connect terminal 6
to the positive
battery terminal
• Connect terminal 4
to the negative
battery terminal
The lever moves
from the "LOCK"
position to the
"UNLOCK" position.
At the
"UNLOCK"
position
• Connect terminal 4
to the positive
battery terminal
• Connect terminal 6
to the negative
battery terminal
The lever moves
from the "UNLOCK"
position to the
"LOCK" position.
ACX02351
LEVER
LOCK
UNLOCK
VIEW A
A
AC
AC204174
CONNECTOR : D-222
AB
1
2
3
5
6
4
9 8
121110
13
15 14
16
17
7
19
20
18
JUNCTION BLOCK SIDE
D-222
SYMPTOM PROCEDURES
TSB Revision
SIMPLIFIED WIRING SYSTEM (SWS)
54B-114
STEP 10. Check the harness wiring from ETACS-ECU
connector D-222 (terminal 4) to front passenger's door
lock actuator connector H-24 (terminal 4).
AC204174
CONNECTOR : D-222
AB
1
2
3
5
6
4
9 8
121110
13
15 14
16
17
7
19
20
18
JUNCTION BLOCK SIDE
D-222
AC000238 AL
CONNECTOR: H-24
FRONT DOOR <RH>
1
2
3
4
5
6
H-24 (B)
H-24 (B)
(HARNESS SIDE)
SYMPTOM PROCEDURES
TSB Revision
SIMPLIFIED WIRING SYSTEM (SWS)
54B-115
NOTE: Also check junction block connector D-217 and inter-
mediate connector D-15 for loose, corroded, or damaged termi-
nals, or terminals pushed back in the connector. If junction
block connector D-217 or intermediate connector D-15 is dam-
aged, repair or replace the damaged component(s) as
described in GROUP 00E, Harness Connector Inspec-
tion
Q: Is the harness wiring from ETACS-ECU connector D-222
(terminal 4) to front passenger's door lock actuator
connector H-24 (terminal 4) in good condition?
YES : Go to Step 11.
NO : The harness wiring may be damaged or the
connectors may have loose, corroded or damaged
terminals, or terminals pushed back in the connector.
Repair the harness wiring as necessary. After repairs
have been made, verify that all the doors can now be
locked and unlocked normally.
AC203860 AB
D-15
D-15
CONNECTOR: D-15
AC203850
CONNECTOR: D-217
AH
D-217
JUNCTION BLOCK
(FRONT VIEW)
D-217
1
8 9 10 11
13 14 15
12
2 3 4
5 6 7
SYMPTOM PROCEDURES
TSB Revision
SIMPLIFIED WIRING SYSTEM (SWS)
54B-116
STEP 11. Check the harness wiring from ETACS-ECU
connector D-222 (terminal 17) to front passenger's door
lock actuator connector H-24 (terminal 6).
AC204174
CONNECTOR : D-222
AB
1
2
3
5
6
4
9 8
121110
13
15 14
16
17
7
19
20
18
JUNCTION BLOCK SIDE
D-222
AC000238 AL
CONNECTOR: H-24
FRONT DOOR <RH>
1
2
3
4
5
6
H-24 (B)
H-24 (B)
(HARNESS SIDE)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст