Mitsubishi Montero (2004+). Manual — part 713
SYMPTOM PROCEDURES
TSB Revision
SIMPLIFIED WIRING SYSTEM (SWS)
54B-109
STEP 4. Check ETACS-ECU connector D-222 for loose,
corroded or damaged terminals, or terminals pushed back
in the connector.
Q: Is ETACS-ECU connector D-222 in good condition?
YES : Go to Step 5.
NO : Repair or check the connector. Refer to GROUP 00E,
Harness Connector Inspection
. After repairs
have been made, verify that all the doors can now be
locked and unlocked normally.
STEP 5. Check the harness wiring from ETACS-ECU
connector D-222 (terminal 19) to driver's door lock
actuator connector H-10 (terminal 4).
AC204174
CONNECTOR : D-222
AB
1
2
3
5
6
4
9 8
121110
13
15 14
16
17
7
19
20
18
JUNCTION BLOCK SIDE
D-222
AC204174
CONNECTOR : D-222
AB
1
2
3
5
6
4
9 8
121110
13
15 14
16
17
7
19
20
18
JUNCTION BLOCK SIDE
D-222
AC000235 AE
H-10 (B)
CONNECTOR: H-10
FRONT DOOR <DRIVER'S SIDE>
H-10 (B)
1
2
3
4
5
6
(HARNESS SIDE)
SYMPTOM PROCEDURES
TSB Revision
SIMPLIFIED WIRING SYSTEM (SWS)
54B-110
NOTE: Also check junction block connector D-209 and inter-
mediate connector D-25 for loose, corroded, or damaged termi-
nals, or terminals pushed back in the connector. If junction
block connector D-209 or intermediate connector D-25 is dam-
aged, repair or replace the damaged component(s) as
described in GROUP 00E, Harness Connector Inspec-
tion
Q: Is the harness wiring from ETACS-ECU connectors
D-222 (terminal 19) to driver's door lock actuator
connector H-10 (terminal 4) in good condition?
YES : Go to Step 6.
NO : The harness wiring may be damaged or the
connectors may have loose, corroded or damaged
terminals, or terminals pushed back in the connector.
Repair the harness wiring as necessary. After repairs
have been made, verify that all the doors can now be
locked and unlocked normally.
AC203859 AC
CONNECTOR: D-25
D-25
D-25
AC203850
CONNECTOR: D-209
AE
D-209
D-209
JUNCTION BLOCK
(FRONT VIEW)
SYMPTOM PROCEDURES
TSB Revision
SIMPLIFIED WIRING SYSTEM (SWS)
54B-111
STEP 6. Check the harness wiring from ETACS-ECU
connector D-222 (terminal 4) to driver's door lock actuator
connector H-10 (terminal 6).
AC204174
CONNECTOR : D-222
AB
1
2
3
5
6
4
9 8
121110
13
15 14
16
17
7
19
20
18
JUNCTION BLOCK SIDE
D-222
AC000235 AE
H-10 (B)
CONNECTOR: H-10
FRONT DOOR <DRIVER'S SIDE>
H-10 (B)
1
2
3
4
5
6
(HARNESS SIDE)
SYMPTOM PROCEDURES
TSB Revision
SIMPLIFIED WIRING SYSTEM (SWS)
54B-112
NOTE: Also check junction block connector D-217 and inter-
mediate connector D-25 for loose, corroded, or damaged termi-
nals, or terminals pushed back in the connector. If junction
block connector D-217 or intermediate connector D-25 is dam-
aged, repair or replace the damaged component(s) as
described in GROUP 00E, Harness Connector Inspec-
tion
Q: Is the harness wiring from ETACS-ECU connectors
D-222 (terminal 4) to driver's door lock actuator
connector H-10 (terminal 6) in good condition?
YES : Replace the ETACS-ECU. Verify that all the doors
can be locked and unlocked normally.
NO : The harness wiring may be damaged or the
connectors may have loose, corroded or damaged
terminals, or terminals pushed back in the connector.
Repair the harness wiring as necessary. After repairs
have been made, verify that all the doors can now be
locked and unlocked normally.
STEP 7. Check front passenger’s door lock actuator
connector H-24 for loose, corroded or damaged terminals,
or terminals pushed back in the connector.
Q: Is passenger’s seat door lock actuator connector H-24
in good condition?
YES : Go to Step 8.
NO : Repair or replace the damaged component(s). Refer
to GROUP 00E, Harness Connector Inspection
. After repairs have been made, verify that all
the doors can now be locked and unlocked normally.
AC203859 AC
CONNECTOR: D-25
D-25
D-25
AC203850
CONNECTOR: D-217
AH
D-217
JUNCTION BLOCK
(FRONT VIEW)
D-217
1
8 9 10 11
13 14 15
12
2 3 4
5 6 7
AC000238 AL
CONNECTOR: H-24
FRONT DOOR <RH>
1
2
3
4
5
6
H-24 (B)
H-24 (B)
(HARNESS SIDE)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст