Mitsubishi Montero (2004+). Manual — part 709
SYMPTOM PROCEDURES
TSB Revision
SIMPLIFIED WIRING SYSTEM (SWS)
54B-93
Operating the front passenger’s door lock key cylinder
When you insert the ignition key to the front passenger’s door
lock key cylinder and turn the key counterclockwise to unlock
the door, the ETACS-ECU energizes its door unlock relay for
0.5 second to activate all the door lock actuators. Then all the
doors will be unlocked.
.
Operating the driver’s or front passenger’s door lock
switch
When the door is unlocked by driver’s or front passenger's door
lock switch, the ETACS-ECU energizes its door unlock relay for
0.5 second to activate all the door lock actuators. Then all the
doors will be unlocked.
.
Forgotten Key Prevention Function
If the driver's door is opened with the ignition key
inserted in the ignition key cylinder and then locked
(i.e., the unlock switch integrated in the driver's door
lock actuator is off, and the lock switch is on), the
ETACS-ECU turns on the unlock relay for 0.5 second
after approximately 0.3 second. This prevents the
door from being locked unintentionally. If the system
fails to unlock the door, the ETACS-ECU try to turn
on the unlock relay five times in maximum for 0.5
second every one second.
NOTE: The dotted line indicates that the system is
trying to turn on the unlock relay if the door can not
be unlocked.
AC203005AC
ON(UNLOCK)
OFF
ON
OFF
FRONT
PASSENGER'S
DOOR LOCK KEY
CYLINDER SWITCH
UNLOCK RELAY
OUTPUT
t: 0.5 second
t
ALL DOOR'S LOCK
ACTUATOR
UNLOCK
LOCK
AC203006AC
DRIVER'S OR
FRONT PASSENGER'S
DOOR LOCK
SWITCH
UNLOCK RELAY
OUTPUT
ON(LOCK)
ON(UNLOCK)
ON
OFF
t
t: 0.5 second
OFF
UNLOCK
LOCK
ALL DOOR'S LOCK
ACTUATOR
AC101499 AE
KEY REMINDER
SWITCH
DRIVER'S DOOR
SWITCH
DRIVER'S DOOR LOCK
ACTUATOR SWITCH
LOCK
UNLOCK
LOCK RELAY OUTPUT
UNLOCK RELAY OUTPUT
(OPEN)ON
(CLOSE)OFF
ON
OFF
ON
OFF
t : 0.3 second
T1 : 0.5 second
T2 : 1 second
(KEY REMOVED)
(KEY INSERTED)
SYMPTOM PROCEDURES
TSB Revision
SIMPLIFIED WIRING SYSTEM (SWS)
54B-94
General circuit diagram for the central door locking system
SYMPTOM PROCEDURES
TSB Revision
SIMPLIFIED WIRING SYSTEM (SWS)
54B-95
INSPECTION PROCEDURE C-1: Central Door Locking System: The central door lock system does not
work at all.
NOTE: This troubleshooting procedure requires the
use of scan tool MB991958 and SWS monitor kit
MB991862. For details on how to use the SWS mon-
itor, refer to "How to use SWS monitor
Central Door Lock Power Supply Circuit
SYMPTOM PROCEDURES
TSB Revision
SIMPLIFIED WIRING SYSTEM (SWS)
54B-96
.
CIRCUIT OPERATION
• The ETACS-ECU controls the central door lock
system, locking or unlocking all the doors by acti-
vating the central door lock relay (built into the
ETACS-ECU). The ETACS-ECU uses inputs from
the following components:
• Driver's or passenger's door lock actuator
switch
• Driver's or passenger's door lock key cylinder
switch
• Door lock switch, which is incorporated in the
power window main switch or power window
sub switch (front RH)
.
TROUBLESHOOTING HINTS
• The ETACS-ECU may be defective
• The wiring harness or connectors may have
loose, corroded or damaged terminals, or termi-
nals pushed back in the connector
ACX02274
FUSIBLE LINK (2)
AF
BATTERY
FUSIBLE LINK
AC000758
CONNECTORS: D-25, D-28
AK
D-25
D-28
ACX02286
CONNECTOR: D-222
AC
JUNCTION BLOCK (REAR VIEW)
ACX02285
CONNECTORS: D-209, D-211, D-217
AK
D-211
D-209
D-217
JUNCTION BLOCK (FRONT VIEW)
AC203774
CONNECTOR: H-10
AB
DRIVER'S DOOR
H-10
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст