Mitsubishi Montero (2004+). Manual — part 691
SWS DIAGNOSIS
TSB Revision
SIMPLIFIED WIRING SYSTEM (SWS)
54B-21
NOTE: The headlight automatic shutdown function
works in approximately one second after the lighting
monitor tone alarm starts sounding, and then the
tone alarm ceases sounding.
• SUNROOF
• THEFT-ALARM
PULSE CHECK
M1549015100216
1. The input signals (signals other than SWS
communication line signals), which are
compatible with the SWS monitor by using the
scan tool or voltmeter, can be confirmed by the
Pulse Check. (Refer to GROUP 00, How to Use
Troubleshooting/Inspection Service Points
2. Use the scan tool or voltmeter to check the
following input signals.
NOTE: If a problem is found the Pulse Check,
proceed to the Problems during Input Signal
Check <Scan tool or voltmeter> (Refer to
Switches and their conditions, which are applicable
for Pulse Check
KEY
REMND.ALM
30
Ignition switch
(IG1)
IG SW (IG1)
OFF
32
Front door switch
FRONT DOOR SW
ON
43
Tone alarm
BUZZER
ON
LGT
MONI.ALM
00
Headlight switch
HEADLIGHT SW
Either is on
01
Tail light switch
TAILLIGHT SW
30
Ignition switch
(IG1)
IG SW (IG1)
OFF
32
Front door switch
FRONT DOOR SW
ON
35
Headlight
automatic
shutdown function
H/L AUTO-CUT
OFF
43
Tone alarm
BUZZER
ON
OTHER
ALARM
30
Ignition switch
(IG1)
IG SW (IG1)
ON
43
Tone alarm
BUZZER
ON
ITEMS
ITEM
NO.
INPUT SIGNAL
DISPLAY ON SCAN TOOL NORMAL CONDITION
ITEM
ITEM
NO.
INPUT SIGNAL
DISPLAY ON SCAN TOOL NORMAL CONDITION
SUNROOF
OPE.
30
Ignition switch
(IG1)
IG SW (IG1)
ON
72
Response by the
sunroof-ECU
S/R ECU ACK
INPUT CHECK (only
momentarily when switch is
operated)
ITEM
ITEM
NO.
INPUT SIGNAL
DISPLAY ON SCAN TOOL NORMAL CONDITION
THEFT-ALARM 45
Theft-alarm
headlight
THEFTALM. H/L
ON
70
Response by the
front-ECU
FRONT ECU ACK
NORMAL ACK
SYMPTOM CHART
TSB Revision
SIMPLIFIED WIRING SYSTEM (SWS)
54B-22
SYMPTOM CHART
M1549000800800
<ECU communication system>
<Function system>
INPUT SIGNAL
REQUIREMENT FOR SOUNDING
TONE ALARM
Key reminder switch
When the inserted ignition key is pulled
out
Hazard light switch
When the switch is turned from off to on
Seat belt which
When the seat belt is fastened
All door switches (excluding front door switch)
Either of the doors (excluding front door)
is opened
Driver's, front passenger's or back door lock key cylinder switch When the key cylinder is locked or
unlocked
Driver's, front passenger's, rear or back door lock actuator
When the driver's key cylinder or inside
lock knob is unlocked or locked
Door lock switch (incorporated in the power window main
switch)
When a door is locked or unlocked by a
door lock switch
Hood switch
When the hood is opened
Keyless entry system transmitter
Switches
When the switch is turned from off to on
SYMPTOM
INSPECTION
PROCEDURE
REFERENCE
PAGE
Communication with the SWS monitor kit is not possible.
A-1
Communication with the column switch (column-ECU) is not possible.
A-2
Communication with the ETACS-ECU is not possible.
A-3
Communication with the front-ECU is not possible.
A-4
Communication with the sunroof motor assembly (sunroof-ECU) is not
possible.
A-5
Communication with the RV meter is not possible.
A-6
SYSTEM
SYMPTOM
INSPECTION
PROCEDURE
REFERENCE
PAGE
Tone alarm
General description concerning the tone
alarm function
−
Ignition key reminder tone alarm function
does not work normally.
B-1
Light reminder tone alarm function does
not work normally.
B-2
Seat belt tone alarm function does not
work normally.
B-3
RV meter operating sound function does
not work normally.
B-4
SYMPTOM CHART
TSB Revision
SIMPLIFIED WIRING SYSTEM (SWS)
54B-23
Central door locking
system
General description concerning the central
door locking system
−
Central door locking system does not work. C-1
Some doors do not lock or unlock.
C-2
All the doors do not lock or unlock with just
the door lock switch operation.
C-3
All the doors do not lock or unlock by
rotating the door lock key cylinder.
C-4
All the doors do not lock or unlock with just
the driver's inside lock knob operation.
C-5
Forgotten key prevention function does not
work normally.
C-6
Power windows
General description concerning the power
windows function
−
Power windows do not work at all.
D-1
The power window timer function does not
work normally.
D-2
Only the front power window (LH) does
work normally by operating the power
window main switch.
D-3
Power windows do not work normally by
operating the passenger's and rear power
window switches.
D-4
Passenger's and rear power windows do
not work normally by operating the power
window main switch.
D-5
Keyless entry system
General description concerning keyless
entry system
−
Keyless entry system does not work.
E-1
The turn-signal light and interior light
answerback function of the keyless entry
system does not work normally.
E-2
Encrypted code cannot be registered.
E-3
Sunroof
General description concerning the sunroof −
Sunroof does not operate.
F-1
Any of the sunroof switch positions is
defective.
F-2
Sunroof timer function does not work
normally.
F-3
Safety mechanism does not function.
F-4
SYSTEM
SYMPTOM
INSPECTION
PROCEDURE
REFERENCE
PAGE
SYMPTOM CHART
TSB Revision
SIMPLIFIED WIRING SYSTEM (SWS)
54B-24
Windshield wiper and
washer
General description concerning the
windshield wiper and washer function
−
The windshield wipers do not work at all.
G-1
The windshield wipers do not work when
the windshield wiper switch is at "INT" or
"MIST" position or the windshield washer
switch is at "ON" position. However, the
wipers work at low speed when the
windshield wiper switch is at "LO" or "HI."
G-2
The windshield wipers do not work
normally.
G-3
The windshield wipers do not stop at the
specified park position.
G-4
The windshield intermittent wiper interval is
not changed by operating the windshield
intermittent wiper interval adjusting knob or
according to the vehicle speed.
G-5
The windshield washer does not work.
G-6
Rear wiper and washer
General description concerning the rear
wiper and washer function
−
Rear wiper does not work at all.
H-1
Rear wiper does not stop at the
predetermined park position.
H-2
When the selector lever is moved to "R"
position during the rear wiper operation,
the rear wiper does not operate at the
continuous mode.
H-3
Rear washer does not work.
H-4
Seat belt warning light
General description concerning the seat
belt warning light function
−
The seat belt warning light does not
illuminate.
I-1
SYSTEM
SYMPTOM
INSPECTION
PROCEDURE
REFERENCE
PAGE
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст