Mitsubishi Outlander GS45X. Manual — part 1772
TRANSFER
TSB Revision
AUTOMATIC TRANSAXLE OVERHAUL
23D-95
>>C<< DUST SEAL INSTALLATION
1. Using the special tool MD998777 and MD998713, install the
oil seal.
.
>>D<< OIL SEAL INSTALLATION
1. Using the special tool MB992075 and MB992142, install the
oil seal.
2. Apply specified grease to the oil seal lip area.
Specified grease: Retinax A
.
>>E<< OIL SEAL INSTALLATION
1. Using the special tool MB990936, install the oil seal.
2. Apply transfer oil to the lip of oil seal.
AK900314
MD998713
MD998777
AC
AK600036
MB992142
AD
MB992075
AK603464
MB990936
AD
NOTES
GROUP INDEX
General . . . . . . . . . . . . . . . . . . . . . . .
Engine . . . . . . . . . . . . . . . . . . . . . . . .
Engine Lubrication . . . . . . . . . . . . . .
Fuel . . . . . . . . . . . . . . . . . . . . . . . . . .
Engine Cooling . . . . . . . . . . . . . . . . .
Intake and Exhaust . . . . . . . . . . . . . .
Engine Electrical. . . . . . . . . . . . . . . .
Engine and Emission Control . . . . .
NOTE:
For the information on all service manual
groups not listed above, please refer to
Volume
Alphabetical Index . . . . . . . . . . . . . .
2011
MITSUBISHI
OUTLANDER
SERVICE MANUAL
Volume 1
FOREWORD
This service manual is subdivided into various group
categories. Each section contains diagnostic,
disassembly, repair, and installation procedures,
along with complete specifications and tightening
references. Use of this manual will aid in properly
performing any service necessary to maintain or
restore the high levels of performance and reliability
designed into this Mitsubishi vehicle.
This manual is designed for use with the 2011 Service
Manual Volume
and the 2007 OUTLANDER
to provide complete service
information for the OUTLANDER.
When reference is made in this manual to a brand
name, number, or specific tool, an equivalent product
may be used in place of the recommended item. All
information, illustrations and specifications contained
in this manual are based on the latest product
information available at the time of publication
approval. The right is reserved to make changes at
any time without notice.
No part of this publication may be reproduced, stored in any retrieval
system of transmitted, in any form or by any means, including but not
limited to electronic, mechanical photocopying, recording or otherwise,
without the prior written permission of Mitsubishi Motors Corporation.
©2010 Mitsubishi Motors Corporation
All Rights, Reserved
Printed in USA
MSCD-007B-2011(1/3)
Proper service methods and repair procedures are necessary for the safe,
reliable operation of all motor vehicles as well as the personal safety of the
person doing the repair. There are many types of procedures, techniques,
tools, and parts for servicing vehicles, as well as differences in the skills of
the people doing the work. This manual cannot give advice or precautions for
every possible situation. Because of this, anyone who does not follow the
instructions in this manual must first make sure that the choice of methods,
tools, or parts will not cause damage to the vehicle or injury to the person
doing the work. The following list contains general precautions that should
always be followed while working on a vehicle.
• Always wear safety glasses for eye protection.
• Use safety stands whenever a procedure requires work under the
vehicle.
• Be sure the ignition switch is always "off" unless otherwise specified by
a procedure.
• Set the parking brake when working on a vehicle.
• Operate the engine only in a well-ventilated area.
• Keep clear of moving parts when the engine is running.
• To prevent serious burns, avoid contact with hot metal parts such as the
radiator, exhaust manifold, tail pipe, catalytic converter and muffler.
• Do not smoke while working on or near a vehicle.
WARNING
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст