Mitsubishi Outlander GS45X. Manual — part 347
ABS DIAGNOSIS
TSB Revision
ANTI-LOCK BRAKING SYSTEM (ABS)
35B-9
NOTE:
.
•
*1
This DTC is not set within the vehicle speed of 12 mph (20 km/h) or less.
•
*2
Turns ON when two or more wheels are faulty.
•
*3
Stays ON until the vehicle speed reaches 6 mph (10 km/h) when the ignition switch is turned to ON next
time, even if the malfunction is repaired and returns to normal condition.
•
*4
May not illuminate depending on the trouble cause.
C2101
Battery
voltage
problem (high
voltage)
18.0
± 1.0 V or
more
Illuminates
Illuminates
Illuminates
Illuminates
C1395
Brake fluid charging
incompletion
Extinguished
Extinguished
Flashes (1 Hz) Illuminates
C2203
VIN not written
Extinguished
Extinguished
Illuminates
Illuminates
C1608
Implausible diagnosis data
Extinguished
Extinguished
Extinguished
Extinguished
U0001
Bus off
Extinguished
Extinguished
Extinguished
Extinguished
U0100
Engine time-out error
Extinguished
Extinguished
Extinguished
Extinguished
U0141
ETACS time-out error
Extinguished
Extinguished
Extinguished
Extinguished
U1415
Variant coding not implemented Extinguished
Extinguished
Illuminates
Illuminates
U1417
Invalid variant coding value
(including wrong assembly)
Extinguished
Extinguished
Illuminates
Illuminates
DTC
Item
Countermeasures for failure
Brake
warning light
Brake
warning
display
ABS warning
light
ABS warning
display
ABS DIAGNOSIS
TSB Revision
ANTI-LOCK BRAKING SYSTEM (ABS)
35B-10
Under EBD and ABS control in case of failure
DTC
Item
Countermeasures for failure
EBD control
ABS control
C100A
Abnormality in FL wheel speed sensor
circuit
Executed
*2
Prohibited
C1015
Abnormality in FR wheel speed
sensor circuit
C1020
Abnormality in RL wheel speed
sensor circuit
C102B
Abnormality in RR wheel speed
sensor circuit
C1011
Abnormality in FL wheel speed sensor
signal
Executed
*2
Prohibited
C101C
Abnormality in FR wheel speed
sensor signal
C1027
Abnormality in RL wheel speed
sensor signal
C1032
Abnormality in RR wheel speed
sensor signal
C1014
Mutual monitoring of FL wheel speed
sensor
Executed
*2
Prohibited
C101F
Mutual monitoring of FR wheel speed
sensor
C102A
Mutual monitoring of RL wheel speed
sensor
C1035
Mutual monitoring of RR wheel speed
sensor
C1041
Abnormality in periodical signal for FL
wheel speed sensor
Executed
*2
Prohibited
C1042
Abnormality in periodical signal for FR
wheel speed sensor
C1043
Abnormality in periodical signal for RL
wheel speed sensor
C1044
Abnormality in periodical signal for RR
wheel speed sensor
C1046
FL wheel speed sensor control phase
time exceeded
Executed
*2
Prohibited
C1047
FR wheel speed sensor control phase
time exceeded
C1048
RL wheel speed sensor control phase
time exceeded
C1049
RR wheel speed sensor control phase
time exceeded
ABS DIAGNOSIS
TSB Revision
ANTI-LOCK BRAKING SYSTEM (ABS)
35B-11
NOTE:
.
•
*1
This DTC is not set within the vehicle speed of 12 mph (20 km/h) or less.
•
*2
: Prohibited when two or more wheels are faulty.
•
*3
: Not prohibited when the brake warning lamp is not illuminated.
C104B
Abnormality in FL wheel inlet valve
system
Prohibited
Prohibited
C104F
Abnormality in FR wheel inlet valve
system
C1053
Abnormality in RL wheel inlet valve
system
C1057
Abnormality in RR wheel inlet valve
system
C105F
Abnormality in FL wheel outlet valve
system
Prohibited
Prohibited
C1063
Abnormality in FR wheel outlet valve
system
C1067
Abnormality in RL wheel outlet valve
system
C105B
Abnormality in RR wheel outlet valve
system
C2104
Malfunction of valve power supply
circuit
Prohibited
Prohibited
C1073
Malfunction of motor drive circuit
Executed
Prohibited
C2116
Abnormality in pump motor power
supply voltage
Executed
Prohibited
C1000
Abnormality in stop light switch circuit Executed
Executed
C2200
Trouble in ABS-ECU
Prohibited
*3
Prohibited
*3
C2100
*1
Battery voltage
problem (low
voltage)
9.7
± 0.3 V or less Executed
Prohibited
8.0
± 0.5 V or less Prohibited
Prohibited
C2101
Battery voltage
problem (high
voltage)
18.0
± 1.0 V or
more
Prohibited
Prohibited
C1395
Brake fluid charging incompletion
Executed
Prohibited
C2203
VIN not written
Executed
Executed
C1608
Implausible diagnosis data
Executed
Executed
U0001
Bus off
Executed
Executed
U0100
Engine time-out error
Executed
Executed
U0141
ETACS time-out error
Executed
Executed
U1415
Variant coding not implemented
Executed
Prohibited
U1417
Invalid variant coding value (including
wrong assembly)
Executed
Prohibited
DTC
Item
Countermeasures for failure
EBD control
ABS control
ABS DIAGNOSIS
TSB Revision
ANTI-LOCK BRAKING SYSTEM (ABS)
35B-12
HOW TO CONNECT THE SCAN TOOL (M.U.T.-III)
Required Special Tools:
• MB991958: Scan Tool (M.U.T.-III Sub Assembly)
• MB991824: Vehicle Communication Interface (V.C.I.)
• MB991827: M.U.T.-III USB Cable
• MB991910: M.U.T.-III Main Harness A
CAUTION
To prevent damage to scan tool MB991958, always turn the
ignition switch to the "LOCK" (OFF) position before con-
necting or disconnecting scan tool MB991958.
1. Ensure that the ignition switch is at the "LOCK" (OFF)
position.
2. Start up the personal computer.
3. Connect special tool MB991827 to special tool MB991824
and the personal computer.
4. Connect special tool MB991910 to the special tool
MB991824.
5. Connect special tool MB991910 to the data link connector.
6. Turn the power switch special tool MB991824 to the "ON"
position.
NOTE: When the special tool MB991824 is energized, the
special tool MB991824 indicator light will be illuminated in a
green color.
7. Start the M.U.T.-III system on the personal computer.
NOTE: Disconnect the scan tool MB991958 in the reverse
order of the connecting sequence, making sure that the ignition
switch is at the "LOCK" (OFF) position.
HOW TO READ AND ERASE DIAGNOSTIC
TROUBLE CODES
Required Special Tools:
• MB991958: Scan Tool (M.U.T.-III Sub Assembly)
• MB991824: Vehicle Communication Interface (V.C.I.)
• MB991827: M.U.T.-III USB Cable
• MB991910: M.U.T.-III Main Harness A
ZC501967
AC404789
AC701411AB
MB991824
MB991827
MB991910
Data link
connector
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст