Mitsubishi Outlander GS45X. Manual — part 348
ABS DIAGNOSIS
TSB Revision
ANTI-LOCK BRAKING SYSTEM (ABS)
35B-13
CAUTION
To prevent damage to scan tool MB991958, always turn the
ignition switch to the "LOCK" (OFF) position before con-
necting or disconnecting scan tool MB991958.
NOTE: If the battery voltage is low, DTCs will not be set. Check
the battery if scan tool MB991958 does not display.
1. Connect scan tool MB991958 to the data link connector.
2. Turn the ignition switch to the "ON" position.
3. Select "System Select."
4. Select "ABS/ASC/ASTC" from the system list, and select the
"OK" button.
5. Select "Diagnostic Trouble Code." to read the DTC.
6. If a DTC is set, it is shown.
7. Choose "DTC erase" to erase the DTC.
HOW TO READ DATA LIST
Required Special Tools:
• MB991958: Scan Tool (M.U.T.-III Sub Assembly)
• MB991824: Vehicle Communication Interface (V.C.I.)
• MB991827: M.U.T.-III USB Cable
• MB991910: M.U.T.-III Main Harness A
CAUTION
To prevent damage to scan tool MB991958, always turn the
ignition switch to the "LOCK" (OFF) position before con-
necting or disconnecting scan tool MB991958.
1. Connect scan tool MB991958 to the data link connector.
2. Turn the ignition switch to the "ON" position.
3. Select "System Select."
4. Select "ABS/ASC/ASTC" from the system list, and select the
"OK" button.
5. Select "Data List."
ZC501967
AC404789
AC701411AB
MB991824
MB991827
MB991910
Data link
connector
ZC501967
AC404789
AC701411AB
MB991824
MB991827
MB991910
Data link
connector
ABS DIAGNOSIS
TSB Revision
ANTI-LOCK BRAKING SYSTEM (ABS)
35B-14
HOW TO PERFORM ACTUATOR TEST
Required Special Tools:
• MB991958: Scan Tool (M.U.T.-III Sub Assembly)
• MB991824: Vehicle Communication Interface (V.C.I.)
• MB991827: M.U.T.-III USB Cable
• MB991910: M.U.T.-III Main Harness A
CAUTION
To prevent damage to scan tool MB991958, always turn the
ignition switch to the "LOCK" (OFF) position before con-
necting or disconnecting scan tool MB991958.
1. Connect scan tool MB991958 to the data link connector.
2. Turn the ignition switch to the "ON" position.
3. Select "System Select."
4. Select "ABS/ASC/ASTC" from the system list, and select the
"OK" button.
5. Choose "Actuator Test" from "ABS" screen.
6. Choose an appropriate item and select the "OK" button.
ZC501967
AC404789
AC701411AB
MB991824
MB991827
MB991910
Data link
connector
ABS DIAGNOSIS
TSB Revision
ANTI-LOCK BRAKING SYSTEM (ABS)
35B-15
DIAGNOSTIC TROUBLE CODE CHART
M1352011301701
CAUTION
During diagnosis, a DTC code associated with other systems may be set when the ignition switch is
turned on with connector(s) disconnected. On completion, check all systems for DTCs. If DTC
code(s) are set, erase them all.
DTC
Inspection item
Reference page
C100A
Abnormality in FL wheel speed sensor circuit
C1015
Abnormality in FR wheel speed sensor circuit
C1020
Abnormality in RL wheel speed sensor circuit
C102B
Abnormality in RR wheel speed sensor circuit
C1011
Abnormality in FL wheel speed sensor signal
C101C
Abnormality in FR wheel speed sensor signal
C1027
Abnormality in RL wheel speed sensor signal
C1032
Abnormality in RR wheel speed sensor signal
C1014
Mutual monitoring of FL wheel speed sensor
C101F
Mutual monitoring of FR wheel speed sensor
C102A
Mutual monitoring of RL wheel speed sensor
C1035
Mutual monitoring of RR wheel speed sensor
C1041
Abnormality in periodical signal for FL wheel speed sensor
C1042
Abnormality in periodical signal for FR wheel speed sensor
C1043
Abnormality in periodical signal for RL wheel speed sensor
C1044
Abnormality in periodical signal for RR wheel speed sensor
C1046
FL wheel speed sensor control phase time exceeded
C1047
FR wheel speed sensor control phase time exceeded
C1048
RL wheel speed sensor control phase time exceeded
C1049
RR wheel speed sensor control phase time exceeded
C104B
Abnormality in FL wheel inlet valve system
C104F
Abnormality in FR wheel inlet valve system
C1053
Abnormality in RL wheel inlet valve system
C1057
Abnormality in RR wheel inlet valve system
C105F
Abnormality in FL wheel outlet valve system
C1063
Abnormality in FR wheel outlet valve system
C1067
Abnormality in RL wheel outlet valve system
C105B
Abnormality in RR wheel outlet valve system
C2104
Malfunction of valve power supply circuit
C1073
Malfunction of motor drive circuit
C2116
Abnormality in pump motor power supply voltage
ABS DIAGNOSIS
TSB Revision
ANTI-LOCK BRAKING SYSTEM (ABS)
35B-16
NOTE:
.
•
*
: This DTC is not set within the vehicle speed of 12 mph (20 km/h) or less.
C1000
Abnormality in stop light switch circuit
C2200
Abnormality in ABS-ECU
C2100
*
Abnormality in battery
voltage (low voltage)
9.7
± 0.3 V or less
C2101
Abnormality in battery
voltage (high voltage)
18.0
± 1.0 V or more
C1395
Brake fluid filling not completed
C2203
VIN not written
C1608
Implausible diagnosis data
U0001
Bus-off
U0100
Engine time-out error
U0141
ETACS time-out error
U1415
Variant coding not implemented
U1417
Invalid variant coding value (including wrong assembly)
DTC
Inspection item
Reference page
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст