Mitsubishi Outlander GS45X. Manual — part 1299
DIAGNOSIS
TSB Revision
CONTROLLER AREA NETWORK (CAN)
54C-141
STEP 6. Check the wiring harness between joint connector
(CAN1) C-103 and occupant classification-ECU connector
D-34-2 for a short to ground. Measure the resistance at
joint connector (CAN1) C-103.
(1) Disconnect joint connector (CAN1), and measure the
resistance at the wiring harness side of joint connector
(CAN1).
(2) Measure the resistance between joint connector (CAN1)
terminal 11 and body ground.
OK: 1 k
Ω or more
(3) Measure the resistance between joint connector (CAN1)
terminal 24 and body ground.
OK: 1 k
Ω or more
Q: Do all the resistances measure 1 k
Ω or more?
YES : Go to Step 7.
NO : Go to Step 26.
AC702818 CH
Harness side: C-103
Test harness
AC702818 CI
Harness side: C-103
Test harness
DIAGNOSIS
TSB Revision
CONTROLLER AREA NETWORK (CAN)
54C-142
STEP 7. Check the wiring harness between joint connector
(CAN1) C-103 and A/C-ECU connector C-109 for a short to
ground. Measure the resistance at joint connector (CAN1)
C-103.
(1) Disconnect joint connector (CAN1), and measure the
resistance at the wiring harness side of joint connector
(CAN1).
(2) Measure the resistance between joint connector (CAN1)
terminal 9 and body ground.
OK: 1 k
Ω or more
(3) Measure the resistance between joint connector (CAN1)
terminal 22 and body ground.
OK: 1 k
Ω or more
Q: Do all the resistances measure 1 k
Ω or more?
YES (vehicles without MMCS) : Go to Step 8.
YES (vehicles with MMCS) : Go to Step 9.
NO : Go to Step 27.
AC702818 CL
Harness side: C-103
Test harness
AC702818 CM
Harness side: C-103
Test harness
DIAGNOSIS
TSB Revision
CONTROLLER AREA NETWORK (CAN)
54C-143
STEP 8. Check the wiring harness between joint connector
(CAN1) C-103 and radio and CD player or radio and CD
changer connector C-16 for a short to ground. Measure the
resistance at joint connector (CAN1) C-103.
(1) Disconnect joint connector (CAN1), and measure the
resistance at the wiring harness side of joint connector
(CAN1).
(2) Measure the resistance between joint connector (CAN1)
terminal 10 and body ground.
OK: 1 k
Ω or more
(3) Measure the resistance between joint connector (CAN1)
terminal 23 and body ground.
OK: 1 k
Ω or more
Q: Do all the resistances measure 1 k
Ω or more?
YES (vehicles without satellite radio) : Go to Step 11.
YES (vehicles with satellite radio) : Go to Step 10.
NO : Go to Step 28.
AC702818 CN
Harness side: C-103
Test harness
AC702818 CO
Harness side: C-103
Test harness
DIAGNOSIS
TSB Revision
CONTROLLER AREA NETWORK (CAN)
54C-144
STEP 9. Check the wiring harness between joint connector
(CAN1) C-103 and CAN box unit connector C-13 for a short
to ground. Measure the resistance at joint connector
(CAN1) C-103.
(1) Disconnect joint connector (CAN1), and measure the
resistance at the wiring harness side of joint connector
(CAN1).
(2) Measure the resistance between joint connector (CAN1)
terminal 10 and body ground.
OK: 1 k
Ω or more
(3) Measure the resistance between joint connector (CAN1)
terminal 23 and body ground.
OK: 1 k
Ω or more
Q: Do all the resistances measure 1 k
Ω or more?
YES (vehicles without satellite radio) : Go to Step 11.
YES (vehicles with satellite radio) : Go to Step 10.
NO : Go to Step 29.
AC702818 CN
Harness side: C-103
Test harness
AC702818 CO
Harness side: C-103
Test harness
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст