Mitsubishi Outlander GS45X. Manual — part 98

RADIO AND CD PLAYER

TSB Revision

CHASSIS ELECTRICAL

54A-389

STEP 2. Checking with audio speaker check.
Perform the audio speaker check, and check which speaker
does not output the sound. Refer to

P.00E-2

.

Q: Is the check result normal?

YES <normal for all> : The trouble can be an intermittent

malfunction (Refer to GROUP 00, How to Cope with
Intermittent Malfunction

P.00-15

).

NO <abnormal for all> : Refer to Inspection Procedure 2

"No sound is heard"

P.00E-2

.

NO <only front door speaker (RH) is abnormal> : Go to

Step 3.

NO <only front door speaker (LH) is abnormal> : Go to

Step 9.

NO <only rear door speaker (RH) is abnormal> : Go to

Step 15.

NO <only rear door speaker (LH) is abnormal> : Go to

Step 19.

NO <only tweeter (RH) is abnormal> : Go to Step 23.
NO <only tweeter (LH) is abnormal> : Go to Step 27.
NO <only subwoofer is abnormal> : Go to Step 31.

STEP 3. Check front door speaker (RH) connector E-04 for
loose, corroded or damaged terminals, or terminals
pushed back in the connector.
Q: Is front door speaker (RH) connector E-04 in good

condition?
YES : Go to Step 4.
NO : Repair or replace the damaged component(s). Refer

to GROUP 00E, Harness Connector Inspection

P.00E-2

.

STEP 4. Check the front door speaker (RH).
(1) Remove the front door speaker (RH). Refer to

P.00-15

.

(2) Check that the front door speaker (RH) outputs the noise

when the voltage of five volts is applied to the front door
speaker (RH) connector terminal.

Q: Does the front door speaker (RH) output the noise?

YES : Go to Step 5.
NO : Replace the front door speaker (RH).

AC703723AB

5 volts

RADIO AND CD PLAYER

TSB Revision

CHASSIS ELECTRICAL

54A-390

STEP 5. Check audio amplifier connector D-126 for loose,
corroded or damaged terminals, or terminals pushed back
in the connector.
Q: Is audio amplifier connector D-126 in good condition?

YES : Go to Step 6.
NO : Repair or replace the damaged component(s). Refer

to GROUP 00E, Harness Connector Inspection

P.00E-2

.

STEP 6. Check the wiring harness between audio amplifier
connector D-126 (terminal 27, 37) and front door speaker
(RH) connector E-04 (terminal 1, 2).
NOTE: Also check intermediate connectors C-20 and C-112 for
loose, corroded, or damaged terminals, or terminals pushed
back in the connector. If intermediate connector C-20 or C-112
is damaged, repair or replace the connector as described in
GROUP 00E, Harness Connector Inspection

P.00E-2

.

• Check the communication lines for open circuit and short

circuit.

Q: Is the wiring harness between audio amplifier connector

D-126 (terminal 27, 37) and front door speaker (RH)
connector E-04 (terminal 1, 2) in good condition?
YES : Go to Step 7.
NO : The wiring harness may be damaged or the

connector(s) may have loose, corroded or damaged
terminals, or terminals pushed back in the connector.
Repair the wiring harness as necessary.

STEP 7. Check radio and CD player connector C-104 and
audio amplifier connector C-16 for loose, corroded or
damaged terminals, or terminals pushed back in the
connector.
Q: Are radio and CD player connector C-104 and audio

amplifier connector C-16 in good condition?
YES : Go to Step 8.
NO : Repair or replace the damaged component(s). Refer

to GROUP 00E, Harness Connector Inspection

P.00E-2

.

RADIO AND CD PLAYER

TSB Revision

CHASSIS ELECTRICAL

54A-391

STEP 8. Check the wiring harness between radio and CD
player connector C-16 (terminal 26, 36) and audio amplifier
connector D-127 (terminal 10, 11).
NOTE: Also check intermediate connector C-22 for loose, cor-
roded, or damaged terminals, or terminals pushed back in the
connector. If intermediate connector C-22 is damaged, repair or
replace the connector as described in GROUP 00E, Harness
Connector Inspection

P.00E-2

.

• Check the communication lines for open circuit and short

circuit.

Q: Is the wiring harness between radio and CD player

connector C-16 (terminal 26, 36) and audio amplifier
connector D-127 (terminal 10, 11) in good condition?
YES : Check the trouble symptom, and go to Step 35.
NO : The wiring harness may be damaged or the

connector(s) may have loose, corroded or damaged
terminals, or terminals pushed back in the connector.
Repair the wiring harness as necessary.

STEP 9. Check front door speaker (LH) connector E-17 for
loose, corroded or damaged terminals, or terminals
pushed back in the connector.
Q: Is front door speaker (LH) connector E-17 in good

condition?
YES : Go to Step 10.
NO : Repair or replace the damaged component(s). Refer

to GROUP 00E, Harness Connector Inspection

P.00E-2

.

STEP 10. Check the front door speaker (LH).
(1) Remove the front door speaker (LH). Refer to

P.54A-692

.

(2) Check that the front door speaker (LH) outputs the noise

when the voltage of five volts is applied to the front door
speaker (LH) connector terminal.

Q: Does the front door speaker (LH) output the noise?

YES : Go to Step 11.
NO : Replace the front door speaker (LH).

STEP 11. Check audio amplifier connector D-126 for loose,
corroded or damaged terminals, or terminals pushed back
in the connector.
Q: Is audio amplifier connector D-126 in good condition?

YES : Go to Step 12.
NO : Repair or replace the damaged component(s). Refer

to GROUP 00E, Harness Connector Inspection

P.00E-2

.

AC703723AB

5 volts

RADIO AND CD PLAYER

TSB Revision

CHASSIS ELECTRICAL

54A-392

STEP 12. Check the wiring harness between audio
amplifier connector D-126 (terminal 28, 38) and front door
speaker (LH) connector E-17 (terminal 1, 2).
NOTE: Also check intermediate connectors C-20 and C-126 for
loose, corroded, or damaged terminals, or terminals pushed
back in the connector. If intermediate connectors C-20 and
C-126 is damaged, repair or replace the connector as
described in GROUP 00E, Harness Connector Inspection

P.00E-2

.

• Check the communication lines for open circuit and short

circuit.

Q: Is the wiring harness between audio amplifier connector

D-126 (terminal 28, 38) and front door speaker (LH)
connector E-17 (terminal 1, 2) in good condition?
YES : Go to Step 13.
NO : The wiring harness may be damaged or the

connector(s) may have loose, corroded or damaged
terminals, or terminals pushed back in the connector.
Repair the wiring harness as necessary.

STEP 13. Check radio and CD player connector C-16 and
audio amplifier connector C-127 for loose, corroded or
damaged terminals, or terminals pushed back in the
connector.
Q: Is radio and CD player connector C-16 and audio

amplifier connector C-127 in good condition?
YES : Go to Step 14.
NO : Repair or replace the damaged component(s). Refer

to GROUP 00E, Harness Connector Inspection

P.00E-2

.

STEP 14. Check the wiring harness between radio and CD
player connector C-16 (terminal 28, 38) and audio amplifier
connector D-127 (terminal 4, 12)

• Check the communication lines for open circuit and short

circuit.

NOTE: Also check intermediate connector C-22 for loose, cor-
roded, or damaged terminals, or terminals pushed back in the
connector. If intermediate connector C-22 is damaged, repair or
replace the connector as described in GROUP 00E, Harness
Connector Inspection

P.00E-2

.

Q: Is the wiring harness between radio and CD player

connector C-16 (terminal 28, 38) and audio amplifier
connector D-127 (terminal 4, 12) in good condition?
YES : Check the trouble symptom, and go to Step 35.
NO : The wiring harness may be damaged or the

connector(s) may have loose, corroded or damaged
terminals, or terminals pushed back in the connector.
Repair the wiring harness as necessary.