Mitsubishi Outlander GS45X. Manual — part 96
RADIO AND CD PLAYER
TSB Revision
CHASSIS ELECTRICAL
54A-381
STEP 12. Rear door speaker (RH) check
(1) Remove the rear door speaker (RH). Refer to
.
(2) Check that the rear door speaker (RH) outputs the noise
when the voltage of five volts is applied to the rear door
speaker (RH) connector terminal.
Q: Does the rear door speaker (RH) output the noise?
YES : Go to Step 13.
NO : Replace the rear door speaker (RH).
STEP 13. Check radio and CD player connector C-16 for
loose, corroded or damaged terminals, or terminals
pushed back in the connector.
Q: Is radio and CD player connector C-16 in good
condition?
YES : Go to Step 14.
NO : Repair or replace the damaged component(s). Refer
to GROUP 00E, Harness Connector Inspection
STEP 14. Check the wiring harness between radio and CD
player connector C-16 (terminal 25, 35) and rear door
speaker (RH) connector E-10 (terminal 1, 2).
NOTE: Also check intermediate connectors C-20 and D-36 for
loose, corroded, or damaged terminals, or terminals pushed
back in the connector. If intermediate connector C-20 or D-36 is
damaged, repair or replace the connector as described in
GROUP 00E, Harness Connector Inspection
• Check the communication lines for open circuit and short
circuit.
Q: Is the wiring harness between radio and CD player
connector C-16 (terminal 25, 35) and rear door speaker
(RH) connector E-10 (terminal 1, 2) in good condition?
YES : Check the trouble symptom. Go to Step 27.
NO : The wiring harness may be damaged or the
connector(s) may have loose, corroded or damaged
terminals, or terminals pushed back in the connector.
Repair the wiring harness as necessary.
AC703723AB
5 volts
RADIO AND CD PLAYER
TSB Revision
CHASSIS ELECTRICAL
54A-382
STEP 15. Check rear door speaker (LH) connector E-24 for
loose, corroded or damaged terminals, or terminals
pushed back in the connector.
Q: Is rear door speaker (LH) connector E-24 in good
condition?
YES : Go to Step 16.
NO : Repair or replace the damaged component(s). Refer
to GROUP 00E, Harness Connector Inspection
STEP 16. Rear door speaker (LH) check.
(1) Remove the rear door speaker (LH). Refer to
.
(2) Check that the rear door speaker (LH) outputs the noise
when the voltage of five volts is applied to the rear door
speaker (LH) connector terminal.
Q: Does the rear door speaker (LH) output the noise?
YES : Go to Step 17.
NO : Replace the rear door speaker (LH).
STEP 17. Check radio and CD player connector C-16 for
loose, corroded or damaged terminals, or terminals
pushed back in the connector.
Q: Is radio and CD player connector C-16 in good
condition?
YES : Go to Step 18.
NO : Repair or replace the damaged component(s). Refer
to GROUP 00E, Harness Connector Inspection
AC703723AB
5 volts
RADIO AND CD PLAYER
TSB Revision
CHASSIS ELECTRICAL
54A-383
STEP 18. Check the wiring harness between radio and CD
player connector C-16 (terminal 27, 37) and rear door
speaker (LH) connector E-24 (terminal 1, 2).
NOTE: Also check intermediate connectors C-32 and D-21 for
loose, corroded, or damaged terminals, or terminals pushed
back in the connector. If intermediate connector C-32 or D-21 is
damaged, repair or replace the connector as described in
GROUP 00E, Harness Connector Inspection
• Check the communication lines for open circuit and short
circuit.
Q: Is the wiring harness between radio and CD player
connector C-16 (terminal 27, 37) and rear door speaker
(LH) connector E-24 (terminal 1, 2) in good condition?
YES : Check the trouble symptom. Go to Step 27.
NO : The wiring harness may be damaged or the
connector(s) may have loose, corroded or damaged
terminals, or terminals pushed back in the connector.
Repair the wiring harness as necessary.
STEP 19. Check tweeter (RH) connector E-02 for loose,
corroded or damaged terminals, or terminals pushed back
in the connector.
Q: Is tweeter (RH) connector E-02 in good condition?
YES : Go to Step 20.
NO : Repair or replace the damaged component(s). Refer
to GROUP 00E, Harness Connector Inspection
STEP 20. Tweeter (RH) check.
(1) Remove the tweeter (RH). Refer to
(2) Check that the tweeter (RH) outputs the noise when the
voltage of five volts is applied to the tweeter (RH) connector
terminal.
Q: Does the tweeter (RH) output the noise?
YES : Go to Step 21.
NO : Replace the tweeter (RH).
STEP 21. Check radio and CD player connector C-16 for
loose, corroded or damaged terminals, or terminals
pushed back in the connector.
Q: Is radio and CD player connector C-16 in good
condition?
YES : Go to Step 22.
NO : Repair or replace the damaged component(s). Refer
to GROUP 00E, Harness Connector Inspection
AC703723AB
5 volts
RADIO AND CD PLAYER
TSB Revision
CHASSIS ELECTRICAL
54A-384
STEP 22. Check the wiring harness between radio and CD
player connector C-16 (terminal 26, 36) and tweeter (RH)
connector E-02 (terminal 2, 1).
NOTE: Also check intermediate connector C-113 for loose, cor-
roded, or damaged terminals, or terminals pushed back in the
connector. If intermediate connector C-113 is damaged, repair
or replace the connector as described in GROUP 00E, Harness
Connector Inspection
.
• Check the communication lines for open circuit and short
circuit.
Q: Is the wiring harness between radio and CD player
connector C-16 (terminal 26, 36) and tweeter (RH)
connector E-02 (terminal 2, 1) in good condition?
YES : Check the trouble symptom. Go to Step 27.
NO : The wiring harness may be damaged or the
connector(s) may have loose, corroded or damaged
terminals, or terminals pushed back in the connector.
Repair the wiring harness as necessary.
STEP 23. Check tweeter (LH) connector E-14 for loose,
corroded or damaged terminals, or terminals pushed back
in the connector.
Q: Is tweeter (LH) connector E-14 in good condition?
YES : Go to Step 24.
NO : Repair or replace the damaged component(s). Refer
to GROUP 00E, Harness Connector Inspection
STEP 24. Tweeter (LH) check.
(1) Remove the tweeter (LH). Refer to
.
(2) Check that the tweeter (LH) outputs the noise when the
voltage of five volts is applied to the tweeter (LH) connector
terminal.
Q: Does the tweeter (LH) output the noise?
YES : Go to Step 25.
NO : Replace the tweeter (LH).
STEP 25. Check radio and CD player connector C-16 for
loose, corroded or damaged terminals, or terminals
pushed back in the connector.
Q: Is radio and CD player connector C-16 in good
condition?
YES : Go to Step 26.
NO : Repair or replace the damaged component(s). Refer
to GROUP 00E, Harness Connector Inspection
AC703723AB
5 volts
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст