Mitsubishi Outlander GS45X. Manual — part 76
DOME LIGHT
TSB Revision
CHASSIS ELECTRICAL
54A-301
STEP 3. Using scan tool MB991958, check data list.
Use the ETACS-ECU data list to check the signals related to
the interior light auto-cut function.
• Turn the ignition switch to the "LOCK" (OFF) position.
• Open each door.
Q: Does scan tool MB991958 display the items "IG
voltage", "ACC switch", "As door ajar switch", "RR door
ajar switch", and "RL door ajar switch" as normal
condition?
YES <Normal conditions are displayed for all items.> :
Go to Step 4.
NO <Normal condition is not displayed for item No.
254.> : Troubleshoot the ETACS-ECU. Refer to Inspection
Procedure 2 "ETACS-ECU does not receive any
signal from the ignition switch (IG1)"
.
NO <Normal condition is not displayed for item No.
288.> : Troubleshoot the ETACS-ECU. Refer to Inspection
Procedure 1 "ETACS-ECU does not receive any
signal from the ignition switch (ACC)"
.
NO <Normal condition is not displayed for item No.
256.> : Troubleshoot the ETACS-ECU. Refer to Inspection
Procedure 5 "ETACS-ECU does not receive any
signal from the front door switch (LH)"
NO <Normal condition is not displayed for item No.
257.> : Troubleshoot the ETACS-ECU. Refer to Inspection
Procedure 6 "ETACS-ECU does not receive any
signal from the front door switch (RH)"
NO <Normal condition is not displayed for item No.
258.> : Troubleshoot the ETACS-ECU. Refer to Inspection
Procedure 7 "ETACS-ECU does not receive any
signal from the rear door switch (LH)"
.
NO <Normal condition is not displayed for item No.
259.> : Troubleshoot the ETACS-ECU. Refer to Inspection
Procedure 8 "ETACS-ECU does not receive any
signal from the rear door switch (RH)"
Item No.
Item name
Normal
conditions
Item 254
IG voltage
1 V or less
Item 288
ACC switch
OFF
Item 256
Dr door ajar switch
Open
Item 257
As door ajar switch
Open
Item 258
RR door ajar switch
Open
Item 259
RL door ajar switch
Open
HIGH-MOUNTED STOPLIGHT
TSB Revision
CHASSIS ELECTRICAL
54A-302
STEP 4. Retest the system.
Check that the interior light automatic shutdown function works
normally.
Q: Is the check result normal?
YES : The trouble can be an intermittent malfunction (Refer
to GROUP 00
− How to use
Troubleshooting/inspection Service Points
− How to
Cope with Intermittent Malfunction
NO : Replace the ETACS-ECU.
ON-VEHICLE SERVICE
CUSTOMIZATION FUNCTION
M1541301200206
With the scan tool MB991958 operation, the follow-
ing functions can be programmed. The programmed
information is held even when the battery is discon-
nected.
REMOVAL AND INSTALLATION
M1541302700055
Refer to GROUP 52A
− Headlining
HIGH-MOUNTED STOPLIGHT
REMOVAL AND INSTALLATION
M1541700200201
Refer to GROUP 51
− Liftgate spoiler
Adjustment
item (scan tool
display)
Adjustment item
Adjustment contents
(scan tool display)
Adjusting contents
Dome light
delay timer with
door
Adjustment of
interior light delay
shutdown time
0sec
0 second (no delay shutdown time)
7.5sec
7.5 seconds
15sec
15 seconds
30sec
30 seconds (initial condition)
60sec
60 seconds
120sec
120 seconds
180sec
180 seconds
Interior light
auto cut timer
Adjustment of
interior light
automatic shutdown
function operation
time
0min
Without function
3min
3 minutes
30min
30 minutes (initial condition)
60min
60 minutes
LICENSE PLATE LIGHT
TSB Revision
CHASSIS ELECTRICAL
54A-303
LICENSE PLATE LIGHT
REMOVAL AND INSTALLATION
M1541900200238
REMOVAL SERVICE POINT
.
<<A>> LICENSE PLATE LIGHT REMOVAL
Push the license plate light to the left to bend the hook, and
then remove by disengaging the tab from the liftgate.
AC506864AC
1
2
3
4
Removal Steps
<<A>>
1.
License plate light assembly
2.
Lens
3.
Bulb
4.
Socket
Removal Steps (Continued)
ZC600392
ZC600395
AC703386
Hook
Section A – A
Liftgate
A
A
Push
Claw
Push
AB
HAZARD WARNING LIGHT SWITCH
TSB Revision
CHASSIS ELECTRICAL
54A-304
HAZARD WARNING LIGHT SWITCH
SPECIAL TOOLS
M1541500100288
Tool
Tool number and
name
Supersession
Application
MB991958
a. MB991824
b. MB991827
c. MB991910
d. MB991911
e. MB991914
f. MB991825
g. MB991826
M.U.T.-III
sub-assembly
a. Vehicle
communication
interface (V.C.I.)
b. M.U.T.-III USB
cable
c. M.U.T.-III main
harness A
(Vehicles with
CAN
communication
system)
d. M.U.T.-III main
harness B
(Vehicles without
CAN
communication
system)
e. M.U.T.-III main
harness C (for
Chrysler models
only)
f. M.U.T.-III
measurement
adapter
g. M.U.T.-III trigger
harness
MB991824-KIT
NOTE: G:
MB991826
M.U.T.-III Trigger
Harness is not
necessary when
pushing V.C.I.
ENTER key.
CAUTION
M.U.T.-III main harness B
(MB991911) should be used.
M.U.T.-III main harness A and C
should not be used for this
vehicle.
Diagnostic code, service data and
actuator test check.
MB991910
MB991826
MB991958
MB991911
MB991914
MB991824
MB991827
MB991825
DO NOT USE
a
b
c
d
e
f
g
DO NOT USE
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст