Mitsubishi Outlander GS45X. Manual — part 28
COMBINATION METER
TSB Revision
CHASSIS ELECTRICAL
54A-109
NOMINAL RESISTANCE OF THE FUEL LEVEL
SENSOR
When float of the fuel level sensor is in stopper positions F and
E, ensure that resistance between the fuel level sensor terminal
and ground terminal is within the standard value.
Standard value:
When the float is moved slowly between stopper positions "F"
and "E", ensure that the resistance is smoothly changing.
.
FUEL LEVEL SENSOR FLOAT HEIGHT
When float is moved to contact the float arm on the stopper,
ensure that stopper positions "F" (height A) and "E" (height B)
are within the standard value.
Standard value:
METER INFORMATION SWITCH CHECK
M1540202000119
Float position
Gauge resistance value (
Ω)
Main
Sub
Stopper position "F"
6.5
± 1.0
6.5
± 1.0
Stopper position "E"
44.7
± 1.0
75.3
± 1.0
AC702853AB
<Main>
<Sub>
Ground
Fuel level sensor
Stopper position “F”
Ground
Stopper position “E”
Fuel level sensor
Float position
Float height mm (in)
Main
Sub
Stopper position "F" (height A)
166.2 (6.5) 48.8
± 3.0
(1.9
± 0.1)
Stopper position "E" (height B) 38.8 (1.5)
238.0
± 3.0
(9.3
± 0.1)
AC702854AB
A
B
B
A
<Main>
<Sub>
Stopper position “E”
Stopper position “F”
Stopper position “F”
Switch position
Tester
connection
Specified condition
Pressed
1-4
Continuity exists (2 ohms
or less)
Released
1-4
Open circuit
AC505421AB
COMBINATION METER
TSB Revision
CHASSIS ELECTRICAL
54A-110
SERVICE REMINDER FUNCTION SET
M1540208200229
HOW TO SET BY OPERATING THE SCAN
TOOL MB991958
CAUTION
• If the combination meter needs to be
replaced, the current driving distance and
elapsed days must be entered into the meter
after the replacement in order to be used for
service reminder function. Therefore, read
"Integrated mileage for reminder," "Integrated
days for reminder," "Mileage until Extra
reminder," "Months until Extra reminder," and
"Current schedule" from the meter before the
replacement using the special function of the
scan tool MB991958, and note them. If "Inte-
grated mileage for reminder" or "Integrated
days for reminder" cannot be read from the
meter using the scan tool MB991958, use the
following method.
a. As for the driving distance for check warn-
ing, use the driving distance displayed on
the multi information display.
b. As for the elapsed days for check warning,
calculate the number of elapsed days from
the delivery date to the customer (service
reminder function start date) and current
date.
• After the service reminder function has
started, when the elapsed days for check
warning is reset for the vehicle whose battery
is removed for a long period (15 days or
more), calculate the elapsed days from the
delivery date to the customer (service
reminder function start date) and the current
date, and then input it.
Using the scan tool MB991958, the following service
reminder functions can be set. Before setting, check
the current status (schedule, driving distance and
elapsed days).
1. Reminder reset (Indicator off)
2. Next schedule reminder cancel
3. Extra reminder setting
4. Extra reminder cancel
5. Periodic reminder schedule set
6. Integrated value adjustment
7. Optional INT schedule setting
.
HOW TO OPERATE THE SCAN TOOL MB991958
CAUTION
Before setting, if the combination meter does not start
measuring the elapsed time, turn the ignition switch to the
ON position while pressing the meter information switch to
start a measurement.
1. Connect the scan tool MB991958 to the data link connector.
2. Start the M.U.T.-III system on the PC and turn the ignition
switch to the "ON" position.
3. Select "Meter" on the "System Select" screen, and press the
"OK" button.
4. Select "Special Function" on the next screen.
COMBINATION METER
TSB Revision
CHASSIS ELECTRICAL
54A-111
5. Select "Service Reminder" on the "Special function" screen.
6. Select the function to be executed from "Function List."
• 1 Reminder reset (Indicator off) (Refer to
• 2 Next schedule reminder cancel (Refer to
).
• 3 Extra reminder setting (Refer to
• 4 Extra reminder cancel (Refer to
).
• 5 Periodic reminder schedule set (Refer to
).
• 6 Integrated value adjustment (Refer to
).
• 7 Optional INT schedule setting (Refer to
.
1. REMINDER RESET (INDICATOR OFF)
CAUTION
• Be careful not to execute "1 Reminder reset (Indicator
off)" again after erasing the service reminder warning
indicator which is currently output, because the next
warning period will be cancelled.
• If the next warning period is cancelled by mistake, the
cancelled warning period can be restored by executing
"5 Periodic reminder schedule set" to set a schedule
different from the current one once, and then returning
it to the previous schedule.
The service reminder warning indicator which is currently out-
put can be cancelled.
NOTE: In addition to the operation of the scan tool MB991958,
the service reminder warning indicator can be cancelled by
operating the meter information switch on the combination
meter. Refer to .
1. On the "Service Reminder" screen, select "1 Reminder reset
(Indicator off)."
NOTE: The screen indicates that the warning period (Nos. 1
and 2 in the data list) is "0 mile." and "0 month."
2. Press the "OK" button.
3. The current warning indicator is cancelled, and the next
warning period is displayed.
NOTE: The screen indicates that the warning period (Nos. 1
and 2 in the data list) is "7,500 km" and "6 month."
.
2. NEXT SCHEDULE REMINDER CANCEL
CAUTION
If the next warning period is cancelled by mistake, the can-
celled warning period can be restored by executing "5
Periodic reminder schedule set" to set a schedule different
from the current one once, and then returning it to the pre-
vious schedule.
The next warning period is cancelled, and its following warning
period can be set.
AC602555
DBA-CW5WXTHHZ1 2006MY - Service Reminder - 401430898
Meter
Special Function
Function List
Reminder reset (Indicator off)
Mileage until reminder
7500 mile
6 month
NAS 10
26 mile
Months until reminder
Current Schedule
Integrated mileage
for reminder
Mileage until Extra
reminder
Months until Extra
reminder
Next schedule reminder cancel
Extra reminder setting
Extra reminder cancel
Periodic reminder schedule set
Integrated value adjustment
Optional INT schedule setting
Click the name of item to execute, and press
the OK button.
Name
No.
1
2
1
2
3
4
5
4
5
7
8
6
7
Name
Value
No.
Service Reminder
Data List
AM
AC602558
0 mile
0 month
1
1
2
4
5
DBA-CW5WXTHHZ1 2006MY - Service Reminder - 4014308A6
Meter
Selected
Item
Special Function
Name
Value
No.
Service Reminder
Data List
Reminder reset
(Indicator off)
Press the OK button to execute.
AV
Mileage until reminder
Months until reminder
Mileage until Extra
reminder
Months until Extra
reminder
AC602558
7500 mile
6 month
1
1
2
4
5
DBA-CW5WXTHHZ1 2006MY - Service Reminder - 4014308A6
Meter
Selected
Item
Special Function
Name
Value
No.
Service Reminder
Data List
Reminder reset
(Indicator off)
Check the result.
AW
Mileage until reminder
Months until reminder
Mileage until Extra
reminder
Months until Extra
reminder
COMBINATION METER
TSB Revision
CHASSIS ELECTRICAL
54A-112
1. On the "Service Reminder" screen, select "2 Next schedule
reminder cancel."
NOTE: The screen indicates that the warning period (Nos. 1
and 2 in the data list) is "1,000 mile" and "1 month."
2. Press the "OK" button.
3. The next warning period is cancelled, and its following
warning period is set.
NOTE: The screen indicates that the warning period (Nos. 1
and 2 in the data list) is changed to "8,500 km" and "7
month."
.
3. EXTRA REMINDER SETTING
In addition to the current warning period, the temporary service
reminder warning period can be set.
1. On the "Service Reminder" screen, select "3 Extra reminder
setting."
NOTE: The screen indicates that the temporary warning
period (Nos. 4 and 5 in the data list) has not been set.
2. Set the temporary warning period (distance or month) of the
"Set value."
NOTE: Either input of distance or month can execute the
setting.
3. Press the "OK" button.
4. The temporary warning period is set.
NOTE: The screen indicates that "2 month" has been added
to the temporary warning period (No. 5 in the data list). (The
distance of No. 4 in the data list has not been set).
.
4. EXTRA REMINDER CANCEL
The temporary service reminder warning period which has
been set can be cancelled.
AC602558
1000 mile
1 month
1
2
2
4
5
DBA-CW5WXTHHZ1 2006MY - Service Reminder - 4014308A6
Meter
Selected
Item
Special Function
Name
Value
No.
Service Reminder
Data List
Next schedule
reminder cancel
Press the OK button to execute.
AX
Mileage until reminder
Months until reminder
Mileage until Extra
reminder
Months until Extra
reminder
AC602558
8500 mile
7 month
1
2
2
4
5
DBA-CW5WXTHHZ1 2006MY - Service Reminder - 4014308A6
Meter
Selected
Item
Special Function
Name
Value
No.
Service Reminder
Data List
Next schedule
reminder cancel
Check the result.
AY
Mileage until reminder
Months until reminder
Mileage until Extra
reminder
Months until Extra
reminder
AC602556
-Input the value-
-Input the value-
Distance to setting point
Months to setting point
7500 mile
6 month
1
3
2
4
5
DBA-CW5WXTHHZ1 2006MY - Service Reminder - 4014308A4
Meter
Selected
Item
Special Function
Name
Value
No.
Service Reminder
Data List
Name
Value
Set value
Extra service
reminder setting
Input the value for the item that you want to
set up, and press the OK button.
AG
Mileage until reminder
Months until reminder
Mileage until Extra
reminder
Months until Extra
reminder
AC602557
2
-Input the value-
Distance to setting point
Months to setting point
3
DBA-CW5WXTHHZ1 2006MY - Service Reminder - 4014308A5
Meter
Selected
Item
Special Function
Service Reminder
Name
Value
0
1
2
3
Back
Space
Clear
Tab
6
5
4
7
8
9
Set value
Range: 0-254, Unit: month,
Extra service
reminder setting
Input the value for the item that you want to
set up, and press the OK button.
AE
AC602558
7500 mile
6 month
2 month
1
3
2
4
5
DBA-CW5WXTHHZ1 2006MY - Service Reminder - 4014308A6
Meter
Selected
Item
Special Function
Name
Value
No.
Service Reminder
Data List
Extra service
reminder setting
Check the result.
AO
Mileage until reminder
Months until reminder
Mileage until Extra
reminder
Months until Extra
reminder
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст