Mitsubishi Space Star. Manual — part 18
ENGINE LUBRICATION –
On-vehicle Service <F9QT>
12-3
OIL FILTER REPLACEMENT
1.
After removing the engine oil filler cap, remove the engine
oil drain plug to drain the engine oil.
2.
Use the oil filter wrench to remove the engine oil filter.
3.
Clean the cylinder block side mounting surface.
4.
Apply a small amount of engine oil to the O-ring of a
new oil filter.
5.
Use the oil filter wrench to install the engine oil filter.
NOTE
Tightening torque: 10 – 14 Nm
6.
Fill with engine oil.
7.
Race the engine 2 – 3 times, and check to be sure that
no engine oil leaks from installation section of the oil filter.
O-ring
NOTES
13A-1
CONTENTS
GASOLINE DIRECT INJECTION (GDI)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
MULTIPOINT FUEL INJECTION (MPI)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
13A-2
CONTENTS
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Outline of Change
3
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . .
Accelerator Pedal Position Sensor
Adjustment
121
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Fuel Pressure Test
122
. . . . . . . . . . . . . . . . . . . . . . . . .
Fuel Leak Check
125
. . . . . . . . . . . . . . . . . . . . . . . . . .
Component Location
126
. . . . . . . . . . . . . . . . . . . . . . .
Accelerator Pedal Position Sensor Check
127
. . . .
Accelerator Pedal Position Switch Check
127
. . . .
Oxygen Sensor Check
128
. . . . . . . . . . . . . . . . . . . . .
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст