Mitsubishi Lancer Evolution IX. Manual — part 660
RADIATOR
ENGINE COOLING
14-25
REMOVAL SERVICE POINTS
<<A>> RADIATOR UPPER HOSE/RADIA-
TOR LOWER HOSE DISCONNECTION
AC200641AB
Mating marks
Make mating marks on the radiator hose and the
hose clamp. Disconnect the radiator hose.
<<B>> AIR PIPE B MOUNTING BOLT
REMOVAL
AC210705
After removing the bolt, position air pipe B out of the
way so that the pipe does not interfere with the radia-
tor assembly or the cooling fan motor, the fan and
shroud assembly.
INSTALLATION SERVICE POINT
>>A<< RADIATOR LOWER HOSE/RADIA-
TOR UPPER HOSE CONNECTION
AC200642
Mating marks
Projection
Water inlet pipe,
water outlet fitting
or radiator
AC
1. Insert each hose as far as the projection of the
water inlet pipe, water outlet fitting or radiator.
2. Align the mating marks on the radiator hose and
hose clamp, and then connect the radiator hose.
NOTES
32-1
GROUP 32
CONTENTS
GENERAL INFORMATION . . . . . . . .
SPECIAL TOOL . . . . . . . . . . . . . . . . .
ENGINE MOUNTING . . . . . . . . . . . . .
REMOVAL AND INSTALLATION . . . . . . . .
INSPECTION . . . . . . . . . . . . . . . . . . . . . . .
TRANSMISSION MOUNTING . . . . . .
REMOVAL AND INSTALLATION . . . . . . . .
INSPECTION . . . . . . . . . . . . . . . . . . . . . . .
ENGINE ROLL STOPPER,
CENTREMEMBER . . . . . . . . . . . . . . .
REMOVAL AND INSTALLATION . . . . . . . .
INSPECTION. . . . . . . . . . . . . . . . . . . . . . . .
CROSSMEMBER* . . . . . . . . . . . . . . .
REMOVAL AND INSTALLATION . . . . . . . .
INSPECTION. . . . . . . . . . . . . . . . . . . . . . . .
WARNINGS REGARDING SERVICING OF SUPPLEMENTAL RESTRAINT SYSTEM (SRS) EQUIPPED VEHICLES
WARNING
•
Improper service or maintenance of any component of the SRS, or any SRS-related component, can lead to
personal injury or death to service personnel (from inadvertent firing of the air bag) or to the driver and
passenger (from rendering the SRS inoperative).
•
Service or maintenance of any SRS component or SRS-related component must be performed only at an
authorized MITSUBISHI dealer.
•
MITSUBISHI dealer personnel must thoroughly review this manual, and especially its GROUP 52B - Supplemental
Restraint System (SRS) before beginning any service or maintenance of any component of the SRS or any
SRS-related component.
NOTE
The SRS includes the following components: SRS-ECU, SRS warning lamp, air bag module, clock spring, and interconnecting
wiring. Other SRS-related components (that may have to be removed/installed in connection with SRS service or maintenance)
are indicated in the table of contents by an asterisk (*).
GENERAL INFORMATION
POWER PLANT MOUNT
32-2
GENERAL INFORMATION
M1321000100544
Inertia principal axes system is incorporated into the
engine mount system.
• The liquid-filled mount system has been adopted
for engine mounting insulator and transmission
mounting insulator to improve ride feeling by opti-
mising the insulator.
• Installation of roll stopper in the upper area has
reduced engine rolling. Furthermore, enlarge-
ment of insulator diameter has reduced idle vibra-
tion.
CONSTRUCTION DIAGRAM
AC310393
Engine mounting insulator
AC
Transmission mounting
insulator
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст