Dodge Dakota (ND). Manual — part 52
INSTALLER C-4213
REMOVER C-4307
INSTALLER C-4308
INSTALLER C-4345
PULLER C-452
HANDLE C-4735-1
INSTALLER D-129
PLUG SP-3289
REMOVER/EXTRACTOR 6310
INSTALLER 6448
3 - 124
REAR AXLE - 9 1/4
ND
HOLDER 6719A
PINION DEPTH SET 6774
TRAC-LOK TORQUE FIXTURE 6790
FIXTURE 8138
ARBOR DISCS 8541
PINION BLOCK 8542
ND
REAR AXLE - 9 1/4
3 - 125
SHAFT-AXLE
REMOVAL
1. With vehicle in neutral, position on hoist.
2. Remove rear brake componants.
3. Remove differential housing cover and drain lubri-
cant.
4. Rotate differential case so pinion mate shaft (1)
lock screw (4) is accessible. Remove lock screw
and pinion mate shaft from differential case.
5. Push axle shaft inward and remove C-lock (1) from
the axle shaft (2).
6. Remove axle shaft.
INSTALLATION
1. Lubricate bearing bore and seal lip with gear lubri-
cant.
2. Install axle shaft through seal, bearing and engage
into side gear (3) splines.
NOTE: Do not damaging axle shaft seal during
axle installation.
3. Install C-lock (1) in axle shaft (2), then push axle
shaft outward to seat C-lock in side gear.
4. Install pinion shaft into differential case and through
thrust washers and differential pinions.
3 - 126
REAR AXLE - 9 1/4
ND
5. Align hole in shaft (1) with hole in the differential
case and install lock screw (4) with Loctite
T
on the
threads. Tighten lock screw to 11 N·m (8 ft. lbs.).
6. Install differential cover and fill with gear lubricant.
7. Install rear brake componants.
SEAL-AXLE SHAFT
REMOVAL
1. Remove axle shaft.
2. Remove axle shaft seal (1) from axle tube (2) with
a seal pick.
ND
REAR AXLE - 9 1/4
3 - 127
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст