Dodge Dakota (ND). Manual — part 1170
2. Support the door with a suitable lifting device.
3. Loosen the latch striker bolts (3). (Refer to 23 -
BODY/DOOR
-
FRONT/LATCH
STRIKER
-
REMOVAL)
4. Loosen the hinge to door fasteners (1 and 2)
(Refer to 23 - BODY/DOOR - FRONT/DOOR -
REMOVAL) or loosen the hinge to hinge pillar fas-
teners (Refer to 23 - BODY/DOOR - FRONT/
HINGE - REMOVAL).
5. Adjust the door to the correct position. (Refer to 23
- BODY/BODY STRUCTURE/GAP AND FLUSH -
SPECIFICATIONS)
6. Tighten the hinge pillar fasteners to 28 N·m (21 ft.
lbs.). (Refer to 23 - BODY/DOORS - REAR/HINGE
- INSTALLATION)
23 - 92
DOORS - REAR
ND
7. Tighten the door to hinge fasteners to 23 N·m (17
ft. lbs.) using the sequence shown. (Refer to 23 -
BODY/DOORS - REAR/DOOR - INSTALLATION)
8. Tighten the latch striker bolts (1). (Refer to 23 -
BODY/DOOR
-
FRONT/LATCH
STRIKER
-
INSTALLATION)
ND
DOORS - REAR
23 - 93
IN/OUT
NOTE: In/out door adjustment is done by loosen-
ing the hinge to door fasteners one hinge at a time
and moving the door to the correct position.
NOTE: When adjustment of the door requires the
loosening of the door to hinge fasteners, it will be
necessary to separate the welded washers with a
chisel or other suitable tool.
NOTE: When adjusting a door with the door to
hinge fasteners, it will be necessary to replace the
shouldered door studs (1) with service studs with-
out the shoulder in order to achieve correct door
position adjustments.
1. Install the service studs (1) and tighten to 12 N·m
(105 in. lbs.).
2. Support the door with a suitable lifting device.
3. Loosen the latch striker bolts (1). (Refer to 23 -
BODY/DOOR
-
FRONT/LATCH
STRIKER
-
REMOVAL)
4. Loosen the hinge to door fasteners (1and 2).
(Refer to 23 - BODY/DOOR - FRONT/DOOR -
REMOVAL)
5. Adjust the door to the correct position. (Refer to 23
- BODY/BODY STRUCTURE/GAP AND FLUSH -
SPECIFICATIONS)
23 - 94
DOORS - REAR
ND
6. Tighten the door to hinges fasteners to 23 N·m (17
ft. lbs.) using the sequence shown. (Refer to 23 -
BODY/DOORS - REAR/DOOR - INSTALLATION)
7. Tighten the latch striker bolts (1). (Refer to 23 -
BODY/DOOR
-
FRONT/LATCH
STRIKER
-
INSTALLATION)
ND
DOORS - REAR
23 - 95
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст