Dodge Dakota (ND). Manual — part 1162
GLASS
REMOVAL
1. Remove the watershield. (Refer to 23 - BODY/
DOOR - FRONT/WATERSHIELD - REMOVAL)
2. Temporarily install the window switch or window
handle and position the glass (1) to gain access to
the glass clamp screws (4).
23 - 60
DOOR - FRONT
ND
3. Loosen the glass clamp screws (2) and carefully
remove the glass (1) from the door.
INSTALLATION
1. Install the glass into the door and position the glass
(1) into the glass clamps.
2. Temporarily install the window crank handle or win-
dow switches and raise the glass into the full up
position.
3. Tighten the glass clamp screws (2) securely.
4. Remove the manual window crank or window
switches, and install the watershield. (Refer to 23 -
BODY/DOOR - FRONT/WATERSHIELD - INSTAL-
LATION)
ND
DOOR - FRONT
23 - 61
HANDLE-EXTERIOR
REMOVAL
1. Remove the watershield. (Refer to 23 - BODY/
DOOR - FRONT/WATERSHIELD - REMOVAL)
2. Separate the clips (1) and disconnect the lock cyl-
inder (2) and exterior handle (3) links from the latch
(4).
23 - 62
DOOR - FRONT
ND
3. Remove the nuts (3), the handle (1) and discon-
nect the electrical connector, if equipped.
4. Separate the clips and remove the links (2).
5. Remove the lock cylinder (1), if equipped. (Refer to
23 - BODY/DOOR - FRONT/LOCK CYLINDER -
REMOVAL)
INSTALLATION
1. Install the lock cylinder (1), if equipped. (Refer to
23 - BODY/DOOR - FRONT/LOCK CYLINDER -
INSTALLATION)
ND
DOOR - FRONT
23 - 63
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст