Dodge Dakota (ND). Manual — part 1115
C140B- TRANSFER CASE MOTOR CONTROL CIRCUIT LOW (CONTINUED)
5.
(T316) SHIFT MOTOR CONTROL B CIRCUIT OPEN
Measure the resistance of the (T316) Shift Motor Control B circuit from
the Shift Motor/Mode Sensor Assembly harness connector to the FCM
connector in the IPM.
Is the resistance above 5.0 ohms?
Yes
>> Go to 6
No
>> Go to 7
21 - 852
TRANSFER CASE - ELECTRICAL DIAGNOSTICS
ND
C140B- TRANSFER CASE MOTOR CONTROL CIRCUIT LOW (CONTINUED)
6.
(T316) SHIFT MOTOR CONTROL B CIRCUIT OPEN (IPM)
Disconnect the Integrated Power Module C5 harness connector.
Measure the resistance of the (T316) Shift Motor Control B circuit from
the Shift Motor/Mode Sensor Assembly harness connector to the Inte-
grated Power Module C5 harness connector.
Is the resistance above 5.0 ohms?
Yes
>> Repair the (T316) Shift Motor Control B circuit for an open.
Perform the TRANSFER CASE VERIFICATION TEST-
VER 1. (Refer to 8 - ELECTRICAL/ELECTRONIC CON-
TROL MODULES/TRANSFER CASE CONTROL MODULE
- DIAGNOSIS AND TESTING)
No
>> Go to 14
7.
(T315) SHIFT MOTOR CONTROL A CIRCUIT SHORTED TO GROUND
Measure the resistance between ground and the (T315) Shift Motor
Control A circuit at the Shift Motor/Mode Sensor Assembly harness
connector.
Is the resistance below 5.0 ohms?
Yes
>> Go to 8
No
>> Go to 9
ND
TRANSFER CASE - ELECTRICAL DIAGNOSTICS
21 - 853
C140B- TRANSFER CASE MOTOR CONTROL CIRCUIT LOW (CONTINUED)
8.
(T315) SHIFT MOTOR CONTROL A CIRCUIT SHORTED TO GROUND (IPM)
Disconnect the Integrated Power Module C5 harness connector.
Measure the resistance between ground and the (T315) Shift Motor
Control A circuit at the Shift Motor/Mode Sensor Assembly harness
connector.
Is the resistance below 5.0 ohms?
Yes
>> Repair the (T315) Shift Motor Control A circuit for a short
to ground.
Perform the TRANSFER CASE VERIFICATION TEST-
VER 1. (Refer to 8 - ELECTRICAL/ELECTRONIC CON-
TROL MODULES/TRANSFER CASE CONTROL MODULE
- DIAGNOSIS AND TESTING)
No
>> Go to 14
9.
(T316) SHIFT MOTOR CONTROL B CIRCUIT SHORTED TO GROUND
Measure the resistance between ground and the (T316) Shift Motor
Control B circuit at the Shift Motor/Mode Sensor Assembly harness
connector.
Is the resistance below 5.0 ohms?
Yes
>> Go to 10
No
>> Go to 11
21 - 854
TRANSFER CASE - ELECTRICAL DIAGNOSTICS
ND
C140B- TRANSFER CASE MOTOR CONTROL CIRCUIT LOW (CONTINUED)
10.
(T316) SHIFT MOTOR CONTROL B CIRCUIT SHORTED TO GROUND (IPM)
Disconnect the Integrated Power Module C5 harness connector.
Measure the resistance between ground and the (T316) Shift Motor
Control B circuit at the Shift Motor/Mode Sensor Assembly harness
connector.
Is the resistance below 5.0 ohms?
Yes
>> Repair the (T316) Shift Motor Control B circuit for a short
to ground.
Perform the TRANSFER CASE VERIFICATION TEST-
VER 1. (Refer to 8 - ELECTRICAL/ELECTRONIC CON-
TROL MODULES/TRANSFER CASE CONTROL MODULE
- DIAGNOSIS AND TESTING)
No
>> Go to 14
11.
(T315) SHIFT MOTOR CONTROL A CIRCUIT SHORTED TO (T316) SHIFT MOTOR CONTROL B CIRCUIT
Measure the resistance between (T315) Shift Motor Control A circuit
and the (T316) Shift Motor Control B circuit at the Shift Motor/Mode
Sensor Assembly harness connector.
Is the resistance below 5.0 ohms?
Yes
>> Go to 12
No
>> Go to 13
ND
TRANSFER CASE - ELECTRICAL DIAGNOSTICS
21 - 855
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст