Dodge Dakota (ND). Manual — part 1189
10. Tighten the pedal support bracket bolts (2) to 14
N·m (10 ft. lbs.).
11. Tighten the fenceline bolts (1) to 10 N·m (85 in. lbs.).
23 - 168
INSTRUMENT PANEL
ND
12. Connect
the
antenna
amplifier
connector,
if
equipped.
13. Install the grounds (2 & 3) and install the bolt (1)
and nut (4).
14. Connect the antenna cable.
ND
INSTRUMENT PANEL
23 - 169
15. Install the passenger side end cap.* Drivers side
shown, passenger side similar.
16. Install the passenger door sill trim cover (1).
(Refer to 23 - BODY/INTERIOR/PANEL-COWL
TRIM - INSTALLATION)
17. Position the center wire harness back and con-
nect the ABS module connectors and grounds (1).
23 - 170
INSTRUMENT PANEL
ND
18. Install the ground (1) and install the bolts (2).
19. Connect the electrical connectors (1, 2 & 3) and
tighten the screws (2 & 3) to 5 N·m (40 in. lbs.).
20. Connect the HVAC electrical connector.
ND
INSTRUMENT PANEL
23 - 171
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст