Chrysler Le Baron, Dodge Dynasty, Plymouth Acclaim. Manual — part 130
ASSEMBLY
Use petrolatum on all seals to ease assembly of
components.
Fig. 28 Remove Input Shaft Snap Ring
Fig. 29 Remove Input Shaft
Fig. 1 Install Input Shaft
Fig. 2 Install Input Shaft Snap Ring
Fig. 3 Return Spring and Snap Ring
Fig. 4 Install Snap Ring
21 - 126
TRANSAXLE
Ä
Fig. 5 Install OD/Reverse Piston
Fig. 6 Install Input Shaft Hub Assembly
Fig. 7 Input Hub Tapered Snap Ring
Fig. 8 Underdrive Clutch Piston
Fig. 9 Seal Compressor Special Tool 5067
Fig. 10 UD Return Spring and Retainer
Ä
TRANSAXLE
21 - 127
CAUTION: Compress return spring just enough to
remove or install snap ring.
Fig. 11 Install UD Spring Retainer and Snap Ring
Fig. 12 Underdrive Clutch Pack
Fig. 13 UD Clutch Flat Snap Ring
Fig. 14 Install Last UD Clutch Disc
Fig. 15 OD/UD Reaction Plate
Fig. 16 Tapered Snap Ring
21 - 128
TRANSAXLE
Ä
Snap ring ends must be located within one
finger of the input clutch hub. Be sure that snap
ring is fully seated, by pushing with screwdriver,
into snap ring groove all the way around.
Underdrive clutch pack clearance must be 0.91
to 1.47 mm (.036 to .058 inch). Select the proper
reaction plate to achieve specifications:
Fig. 17 Seating Tapered Snap Ring
Fig. 18 Set Up Dial Indicator for Clutch Clearance
Fig. 19 Use Hook Tool to Raise One Clutch Disc
UNDERDRIVE REACTION PLATE CHART
Fig. 20 Install OD Clutch Pack
Fig. 21 Install Waved Snap Ring
Ä
TRANSAXLE
21 - 129
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст