Dodge Durango (HB). Manual — part 1121
2. Remove the nuts (3) and remove the tow hook.
INSTALLATION
1. Install the support brackets and install the bumper
support nuts (3).
2. Tighten the nuts (3) to 109 N·m (80 ft. lbs.).
3. Install the front body mount bolt (1) and tighten to
81 N·m (60 ft. lbs.).
HB
FRAME & BUMPERS
13 - 23
4. Install the support bracket (2) nuts (3) and tighten
to 109 N·m (80 ft. lbs.).
SKID PLATE-FUEL TANK
REMOVAL
1. Raise and support the vehicle.
2. Support the skid plate with a suitable lifting device.
3. Remove inboard bolts (4).
4. Remove bolts (3) that attach skid plate to frame
side rail and remove the skid plate.
13 - 24
FRAME & BUMPERS
HB
INSTALLATION
1. Position and support skid plate under fuel tank.
2. Install inboard bolts and tighten to 41 N·m (30 ft.
lbs.).
3. Install bolts attaching skid plate to frame side rail
and tighten to 37 N·m (27 ft. lbs.).
RECEIVER KIT-TRAILER TOW
REMOVAL
1. Remove the rear bumper. (Refer to 13 - FRAME &
BUMPERS/BUMPERS/REAR
BUMPER
-
REMOVAL)
2. Remove the rear cab to frame bolts (3) and
rebound cushions (2) to remove the front hitch bolt.
HB
FRAME & BUMPERS
13 - 25
3. Support trailer hitch on a suitable lifting device.
4. Disconnect the trailer electrical wiring electrical
connector.
5. Remove the bolts (3 and 5) and nuts (2) attaching
trailer hitch (4) to frame rails (1).
6. Separate trailer hitch (4) from vehicle.
INSTALLATION
1. Position trailer hitch on vehicle.
2. Install the bolts and nuts (2, 3 and 5) attaching
trailer hitch to frame rail and tighten to 183 N·m
(135 ft. lbs.).
3. Connect the trailer wiring electrical connector.
4. Install the rear body rebound cushions (2) and cab
mounting bolts (3) and tighten to 81 N·m (60 ft.
lbs.).
5. Install the rear bumper. (Refer to 13 - FRAME &
BUMPERS/BUMPERS/REAR
BUMPER
-
INSTALLATION)
13 - 26
FRAME & BUMPERS
HB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст