Dodge Durango (HB). Manual — part 189
INSTALLATION
1. Insert cable through radio opening. Route behind
glove box and attach to retainers.
2. Install the radio.
3. Reach under the instrument panel outboard of the
glove box to access and connect the antenna
coaxial cable connector (1) and (2).
4. Install cowl trim.
5. Connect the battery negative cable.
MEDIA SYSTEM-MONITOR/DVD
DESCRIPTION
The video entertainment system, consist of a DVD
player (3), battery powered remote control, and two
headsets. the DVD player is located on the headliner
(2) behind the driver and front seat passenger seat. In
addition to video DVDs, the system will play audio
DVDs, audio CDs, MP3 audio disc, and video CDs.
There are plug-in jacks on the housing to show video
directly from a video camera, connect video games for
display on the screen, and play music directly from a
MP3 player.
HB
AUDIO/VIDEO - SERVICE INFORMATION
8A - 197
OPERATION
The DVD player is self contained. The DVD disc are loaded and ejected through a slot in the faceplate. A seven
inch (diagonal measurement) liquid crystal display (LCD) screen supports both 3 X 4 and 6 X 9 video formats. The
hinged screen latches in the closed position and swings down for viewing. A lock-out switch on the front of the
housing enables front seat occupants to disable the DVD player.
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the two mounting fasteners.
3. Using a trim stick, press the retaining clip at the
rear of the DVD player. Move the DVD player from
side to side to release from roof panel (2).
4. Disconnect electrical harness connector (1) and
remove DVD player.
INSTALLATION
1. Connect electrical harness connector (1) to DVD
player (3).
2. Position DVD player and press into place.
3. Install and tighten mounting fasteners.
4. Connect battery negative cable.
8A - 198
AUDIO/VIDEO - SERVICE INFORMATION
HB
RADIO
DESCRIPTION
Available radios include:
•
AM/FM/CD (REF sales code)
•
AM/FM/6 disc CD/MP3 (RAQ sales code)
•
AM/FM/6CD/RDS/MP3/Navigation with integrated
display (REC sales code)
•
AM/FM/CD/RDS (RAR sales code) - export only
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the instrument panel center bezel (Refer
to
23
-
BODY/INSTRUMENT PANEL/INSTRU-
MENT PANEL CENTER BEZEL - REMOVAL).
3. Remove the radio mounting fasteners.
HB
AUDIO/VIDEO - SERVICE INFORMATION
8A - 199
CAUTION: Pulling the antenna cable straight out
of the radio without pulling on the locking antenna
connector could damage the cable or radio.
4. Disconnect the antenna cable (3) by pulling the
locking antenna connector (2) away from the radio
(1).
5. Disconnect the electrical harness connector and
remove radio.
INSTALLATION
1. Connect the electrical harness and antenna cable
(3) to radio.
8A - 200
AUDIO/VIDEO - SERVICE INFORMATION
HB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст